I used an electrical cleaning spray on some faders and it has broken one of them. Taking a look inside the fader it seems that the solvent disintegrated the most worn parts of the track at the top and bottom, so the fader just measures infinite resistance between pins, but the rest of the carbon...
Hello everyone,
(As some of you may remember) I own a pair of JBL 305P MKII monitors. What I want to do is to be able to connect my computer and my keyboard to a mixer and then send the combined sounds into my speakers. Now, ive done my research so the reason Im making this thread is to make...
Hi everyone! I am having an issue with my Mackie ProFX12 mixer. Basically, the lights just flash when I turn it on. I have replaced C9 and D4 which have made the blinking faster, so I think I'm getting closer to narrowing down my issue. Before I go replace each of the capacitors, does anyone...
Hey there, apologies for not being experienced in this area. I have the current system:
2 Technics SL1200 turntables
Xone 92 Mixer
Aragon 24k Preamp
Aragon 4004 (Mark I) Power Amp
Infinity Kappa 9 Speakers
Is there anyway to bridge the Xone 92 to the Aragon Preamp? I bought the Preamp because...
Greetings!
I am digging into a new design for a summing amp. I want to go for color, as I will be using the mixer as final stage, to mix hardware synths recorded to my DAW, and RME interface for D/A.
I have a number of Altec Input transformers Altec/Peerless Octal Line Transformer Model 15356...
Hi! I've been working on a Studiomaster Mixdown Classic 8. I opened it up to make sure the levels were selected properly (i.e. balanced +4 dBu). In order to open the console, you have to take out the entire board, not by channel strip. In doing this, I accidentally pulled some multipins in the...
I'm looking to improve the way I'm handling audio for my video digitization workflow, particularly for VHS and EIAJ open-reel formats where the audio levels are nowhere near where I want them when they hit my capture rig.
To that end, I want to add a mixer in between to adjust the L and R...
Hello all. I have a beautiful DDA QII mixing console that has one issue. When listening to anything through the board the left channel tends to cut in and out sporadically. It happens quite often and doesn't seem to matter what input channel or source so I suspect an issue with tbe master...
My mackie vlz 1604 recently developed a strange problem:
The problem: When I turn it on, all the channels develop a constant .6v dc in the signal path somewhere in the preamp stage. Stranger still, when I turn on the phantom power switch all the channels bump up to 1.37v before decaying back...
Hi everybody!
I tried to make a radio with TA2003P. It works very nice on FM, nothing to say wrong about it. The sound is clear. The only problem could be the ceramic filter (BPF88-108) for the antena, it takes too much of the active signal, but if is replaced by a capacitor of around 15pF or...
I am trying to connect 2 Rode Video Micro microphones to my laptop. My laptop does not appear to have the ability to record a 2 channel mic input. I have a 2 mono to 1 stereo combiner but only one mic can record on my laptop. I have same problem when I try to connect two mics to my iphone...
I have this nice Ampex AM-10 that I bought because it has plenty of gain for a pair of handcrafted ribbon microphones that I designed and made.
Problem is, one of the line amp cards is not working. Channel A output was dead while channel B was working fine. I pulled both line amp cards and...
Hi,
I just received an old mixer from the eighties that has been stored away in a basement for more than 20 years.
It was stored in a flight case and all the pots and faders are "glued" and wont move at all. Of corse I dont use much strength to try to move them since that would totally damage...
I'm wanting to confirm what I've researched and have currently as my setup. Everything that I've read suggests this is the proper way to have this kind of setup without blowing anything up or put too much load on the components. But, I still want to check and this thread can be good for...
Product In Question- https://smile.amazon.com/gp/product/B0719BC5FS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So novice is an understatement but I'm starting an information-based podcast that I'll basically be "engineering". I bought this product in the link above, although I notice a lot of...
Hello! I've been wondering for a couple of months now. Should i go with hifi or with active studio monitors.
Setup will be like
-Passive floorstanding speakers, power amp, preamp (mixer Allen and heath xone 23c), turntable and pc as a source
-Active studio monitors (M-Audio bx8 d2) with also...
My son's frat is looking to get a nice 'sound system' to play music in a house / outside when tailgating, etc.
The speakers they settled on are 2 of the EV ZLX 15P speakers. my son says there's a guy in the frat that has a dj box / mixer? that has 2 RCA plugs in it and they want to be able to...
Greetings ....
Who remembers using those very cheap microphone mixers of the 1960s and 1970s, such as those offered by Lafayette Radio and Realistic (Radio Shack)?
If yes, did you use them with or without a battery? If not using a battery, the mixers would have functioned passively, relying on...