• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

power

  1. jmosher

    Marantz 2220B 'LOUD' popping noise!

    After about 20 minutes of use I got a LOUD popping noise. It sounds like if you were to drop a needle onto a record very violently and the volume is set to 11. I had to run over and shut it down. To be fair, it has NOT been restored but I cleaned the pots pretty good. Not sure what this could...
    • jmosher
    • Thread
    • caps marantz marantz 220b popping noise power recap restore
    • Replies: 3
    • Forum: Marantz Audio
  2. S

    Power issue? with Denon DRM-740

    Hi, I got a denon drm 740 off an ebay seller for less than £30, it looks in great conditions and the seller stated it was in good working order....I was really looking forward to start using it! Plugged in, power switch on, the display partly light up for half a second and then fades, the right...
    • stocazzo
    • Thread
    • denon denon drm740 power tape
    • Replies: 0
    • Forum: Tape
  3. Myceliumvoic

    The birthday set up. What would your birthday pair be?

    Went a little crazy today and set up a few extras, i felt as though it was a good excuse. Klipsch KSF 8.5 - 2 way Kenwood LS P7300 - 5 way Unknown speakers under the Kenwoods (they may be antique but i can't figure out what they are.) Mycelium Voice MV101, MV102, MV222 (the enclosures are...
    • Myceliumvoic
    • Thread
    • dbx home audio kenwood klipsch mushroomspeakers mycelium audio myceliumvoice power speakers unknown
    • Replies: 8
    • Forum: Speakers
  4. QSilver

    Big DC Power supply. What does this do?

    I have z bug old dc power supply from the 60s. It was originally used for running solid state systems in electro-pneumatic pipe organs and it seems quite beefy. 25A @ 15/13/12v I plan on changing the capacitor bank to make sure it keeps performing well. Though there are a few parts in here...
    • QSilver
    • Thread
    • kimber allen power rectifier supply transformer
    • Replies: 33
    • Forum: DIY
  5. D

    Picked up a set of Thiel CS3.5 - Amplifier Recommendations?

    So I picked up a nice set of vintage Thiel CS3.5 speakers last week. I have done some research and apparently these are very inefficient speakers and require a high current amp designed to drive 4 ohm loads well. I am looking for some recommendations for an amplifier that will be a good match...
  6. TheDHndrsn

    Noob Tube Question (seriously)

    I have always been confused by something. Well, many things but this one applies to stereo. I lived through the transition of tube to solid state, albeit young. Now that I have rediscovered my audio soul, I find myself wondering yet again about the same, unanswered question. When you think of...
  7. patslice

    AC motor wiring

    Hello everybody! I'm building my TT, and I'm a little ignorant about motors wiring. This is my motor, a 220VAC/50Hz Premotec. This is my power source, a 220VAC filtered input. This is the scheme of the wiring for my motor (parallel coils and soldered terminals) It looks pretty simple, but...
    • patslice
    • Thread
    • diy motor power turntable wiring
    • Replies: 5
    • Forum: DIY
  8. marko012po

    HELP! Jamo laser 3000p

    Hi, this is my first post here on audiokarma and i am looking for some help about my speakers. Its about specifications of my Jamo laser 3000p that i cant find anywhere on web. On the back side of speaker box is only frequency range and power. Can anybody help me to find any informations about...
    • marko012po
    • Thread
    • 3000 help jamo laser power speakers specifications
    • Replies: 10
    • Forum: Speakers
  9. McShane PS schematic

    McShane PS schematic

    McShane power supply schematic
    • jcolletteiii
    • Media item
    • citation ii power supply
    • Comments: 0
    • Category: DIY
  10. ONKYO INTEGRA M-588 STEREO POWER AMPLIFIER

    ONKYO INTEGRA M-588 STEREO POWER AMPLIFIER

    This amp requires power hungry speakers.Under powered speakers become Muddy and Rushed,also with the correct load this amp can upset your neighborhood. https://www.youtube.com/watch?v=C8etkAUTZVU
    • petethemadma
    • Media item
    • amplifier onkyo power
    • Comments: 0
    • Category: Member's Component
  11. sansui au 9500 the power house

    sansui au 9500 the power house

    weighing in at 51.26 Lbs. the transformer is probably the half of weight. This is a very clean second hand purchase, with just the left channel DC offset in the high 90's. Now both right and left DC run + - 2.0
    • gkwolfman
    • Media item
    • 9500 amp au au9500 integrated power sansui shot
    • Comments: 0
    • Category: Sansui Gallery
  12. HA-1 power cable

    HA-1 power cable

    homemade power cable for HA-1 MkII headphone amplifier
    • Orcinus
    • Media item
    • cable cord diy power
    • Comments: 0
    • Category: DIY
  13. power cord

    power cord

    power cord
    • hifijohn
    • Media item
    • cord power
    • Comments: 0
    • Category: DIY
  14. power line conditioner

    power line conditioner

    power line conditioner
    • hifijohn
    • Media item
    • conditioner line power
    • Comments: 0
    • Category: DIY
  15. The Tower of Power

    The Tower of Power

    Technics - Frequency Generator Servo Turntable System (not pictured) Radio Shack - 2-Channel Mixer Fisher Studio Standard - Stereo Cassette Deck JVC - Stereo Double Cassette Deck JVC - Computerized Remote System Controller w/ Graphic Equalizer Technics - Quartz Synthesizer FM/AM Stereo...
    • CarverPower
    • Media item
    • of power the tower
    • Comments: 0
    • Category: Member's Systems
  16. Kenwood KM-8002

    Kenwood KM-8002

    Bought this in Boulder, Colorado, in 1990 or so. I believe I paid 99 bucks for it at the time. Straight design, and with variable output knobs, I can use it without a pre-amp if I choose. I've been using it to power a pair of BA HD5 bookshelf speakers, very clean sound.
    • Wigwam Jones
    • Media item
    • amplifier power
    • Comments: 0
    • Category: Member's Component
  17. Fisher RS-1080 power supply

    Fisher RS-1080 power supply

    Here is what makes this baby tick, caps the size of beer cans, that tranny stands around 7 inches tall and 5 1/2 wide and deep.
    • yrly
    • Media item
    • fisher power rs-1080 supply
    • Comments: 1
    • Category: Member's Component
  18. BA150 Power Amp page 1

    BA150 Power Amp page 1

    A very interesting power amp from 1979. Combines analog and digital, solid state and tube. The analog is the amplification type, digital is the auto-bias, solid state for the input section and tube output devices. With front panel NFB control! What an amp, never heard one though.
    • House de Kris
    • Media item
    • amp analog audionics ba150 digital power ss tube
    • Comments: 0
    • Category: Component Gallery
  19. Elrod power cords w/Hydra

    Elrod power cords w/Hydra

    • MikE
    • Media item
    • cords elrod power w/hydra
    • Comments: 1
    • Category: Component Gallery
  20. Power Amp Rack

    Power Amp Rack

    An older photo of a portion of the amp rack. I currently do not use this configuration. In fact, I only had it set up that way for a few days. From top to bottom we have: Adcom GFA-545II Cerwin-Vega A-1800 Bryston 2B-LP Bryston 4B SAE 2402 Technics SE-9060 Velodyne ULDII Hafler DH-500
    • House de Kris
    • Media item
    • adcom amp bryston cerwin-vega hafler power sae velodyne
    • Comments: 0
    • Category: Member's Systems
  21. Wardsweb 2A3 Umbilical Cord

    Wardsweb 2A3 Umbilical Cord

    Here is closeup shot of the Canon circular connector used for the power umbilical cord to the amp chassis.
    • Wardsweb
    • Media item
    • 2a3 canon circular connector cord coupled direct diy power supply umbilical wardsweb
    • Comments: 2
    • Category: DIY
  22. 2A3 Power Supply back

    2A3 Power Supply back

    This shows the power supply inlet (Corcom) and the outlet (Canon) connectors.
    • Wardsweb
    • Media item
    • 2a3 back coupled direct power supply wardsweb
    • Comments: 1
    • Category: DIY
  23. 2A3 Power Supply

    2A3 Power Supply

    • Wardsweb
    • Media item
    • 2a3 power supply
    • Comments: 1
    • Category: DIY
  24. 2A3 Power Supply Wiring

    2A3 Power Supply Wiring

    • Wardsweb
    • Media item
    • 2a3 power supply wardsweb wiring
    • Comments: 1
    • Category: DIY
  25. Atma-sphere S-30

    Atma-sphere S-30

    • admin
    • Media item
    • amp atma-sphere power s-30
    • Comments: 1
    • Category: Member's Tube Gear
Back
Top Bottom