• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

recieiver

  1. audioman356

    My Sony STR-7045 is Back

    My trusty Sony STR-7045 is back in service. My Fosi BT20A is sitting in the closet. I'm listening KPFA's Sunday Show podcast. Being vintage, it has some issues. But, I'm going to double clean the far-left input selector switch with DeOxit. I think that'll solve the crosstalk I'm hearing when I...
  2. S

    Pioneer SX-939 drunk warble on aux signal

    Hi! Running into my aux input of my sx939 and the signal has a slow drunk modulation to it? Any idea what might be going on and how I might rectify it? It’s pretty consistent. Thank you in advance!
  3. YoSeth

    I'm a noob - SX-737 Rebuild (follow along?)

    Ok, so not a total noob. A few years ago I successfully replaced all the 2SA725s and 2SC1313s. Decided to carry on and do a full recap since nothing else has ever been touched. I purchased the recap kit from eBay and opened her up today, starting with testing the output transistors per the kit's...
  4. L

    Tandberg TR 2060: powers on, no sound

    hello everyone, I recently acquired an old Tandberg tr 2060. Cosmetically, it’s in great shape (both inside and outside) and it powers on, but theres no sound output. I’ve tried all the inputs and it’s the same for all of them. There’s no power coming out any of the speaker channels. Any ideas...
    • Lulu N
    • Thread
    • no sound recieiver tandberg tandberg 2060
    • Replies: 3
    • Forum: Solid State
  5. CrazyFoot

    Building a system to make my speakers shine

    Hello all, I am just getting into the world of vintage audio and vinyl. I have been browsing past forums and hoping to tap your guys wealth of knowledge on a couple of setup questions I have. This time to build a set-up around my newly acquired Boston Acoustic A200's. This setup right now...
  6. teddyfreddy

    Good places/events in Wisconsin where I can go to look for vintage audio gear

    The title says it all, any members from Wisconsin with some recommendations for me? Are there any cool flea markets, electronics/radio shows, shops etc. where I can find good deals on vintage audio gear?
  7. Mahan Safaei

    Marantz 2245 VS. Kenwood KR7400

    Hello, I'm new to the vintage Hifi world and have the opportunity to pick up the units noted above. The Marantz for $450 and the Kenwood for $350. They're both in working condition but show their age. Neither unit has been restored or even cleaned. Which is the better choice. Please see the...
    • Mahan Safaei
    • Thread
    • 2245 70's amplifier kenwood kr7400 marantz marantz 2245 recieiver vintage
    • Replies: 4
    • Forum: Solid State
  8. A

    Kenwood KR-V9030 not outputting left channel

    I have a Kenwood KR-V9030 receiver that I inherited from my father. It was stored in a garage used for woodworking so it is dusty and hasn't been used in a while. The right outputs sound great but I get absolutely nothing out the left, even from headphones. I have tried multiple inputs as well...
  9. goodshelac

    Marantz 2220b Dead right channel

    Happy belated turkey day AK! Just finished recapping the phono board, power supply board, and pre amp/tone board. As was when I started the right channel is dead on all inputs. Power supply tested at 35mv. Idle current set at 20mv. Left channel DC is 0 and I can see it move as I adjust the trim...
  10. Spotopolis

    Denon AVR x2100w Protection Circuit/Mode

    My 2100 was working flawlessly until my 9-year-old was showing off and cranked up the volume super fast up to max volume. It was there for about 5 seconds before it got turned back down. Ever since the protection light will come on when you power on the receiver, but only sometimes. Sometimes it...
    • Spotopolis
    • Thread
    • 2100 2100w avr avr-x2100w avrx denon protect mode protection circuit recieiver stereo
    • Replies: 3
    • Forum: Home Theater & Video
  11. mr_soju

    Two Turntables, Mixer, Receiver - Set Up Check

    I'm wanting to confirm what I've researched and have currently as my setup. Everything that I've read suggests this is the proper way to have this kind of setup without blowing anything up or put too much load on the components. But, I still want to check and this thread can be good for...
    • mr_soju
    • Thread
    • advice audio technica bedroom dj mixer numark recieiver technics two turntables
    • Replies: 2
    • Forum: Turntables
  12. R

    Technics SA-8500X 4-Channel Reciever

    I bought a 1976 Technics Reciever Model SA-8500X 4-Channel Quad Reciever was there Top of line model. I bought it off of EBay for $450.00 & I didn’t get a working unit. The Person let the time run out on it. The Exterior is 100% Mint Condition not a scratch anywhere on it. But I took the case...
  13. BluePhantom2

    Sherwood audio system

    I’m cleaning out my grandpa’s basement and house after he passed away, including the old Sherwood audio system setup in the living room. I can’t hardly find any information on the turntable (currently it is so caked with dust that it’s barely identifiable without the manual) or the speakers and...
  14. M

    Help! New Pioneer LX-690 owner here! AC Power Cord Missing

    Hi, First post, I've just bought and received a vintage pioneer LX-690 (my first bit of vintage kit) however it didn't come with a power cord... So I'd like to test it but obviously I can't plug it in and I don't know what sort of power cord I need to get or if I can get one? It looks like a...
  15. G

    Show some love for recievers!

    While I was doing research before I bought my Mcintosh 4100 I came across a lot threads about them and other recievers. But, they all were pitting on reciever against another. It shows that a lot of people are passionate about their recievers so I thought I'd start a thread where people can...
  16. Joe Stem

    Another Pionner sx 1250 repair

    Hey I'm Joe, I live in Sw Florida and I've noticed from looking around and searching the forum that it does not appear that there are any shops to work on these Vintage receivers. This week my dad gave me his 1976 Pioneer SX1250... :cool::cool::cool: It has not been used in at least 20 years...
    • Joe Stem
    • Thread
    • 1250 monter amp pioneer recieiver repai restoration sx sx1250
    • Replies: 70
    • Forum: Pioneer Audio
Back
Top Bottom