He does have a few questions about the resistance of each driver so tonight I will take the wires off where they’re wired together and let him know what they measure out to.
Bi-amping Infinity RS-2
- Thread starter Willy6
- Start date
The technical manual says they’re a three way speaker.
See post 7.
If you start believing Infinity technical manuals you're in trouble
Speaking of which, there are two known different versions of the RS-II schematic floating around so folks should make sure they've got the one that pertains to their speakers.
The one above is the way my speaker crossovers were wired and I went ahead and bought the 120hz/24db and the 3000hz/24db cards and rewired the mids,tweeters and woofers so they are all in series and now they are a 3 way speaker.See post 7.
If you start believing Infinity technical manuals you're in trouble
Speaking of which, there are two known different versions of the RS-II schematic floating around so folks should make sure they've got the one that pertains to their speakers.
My amplifiers are happy and the speakers sound phenomenal!
stereofanboy
Addicted Member
And yet it lists four crossover points.
swechsler
Frog Whisperer
That was probably done for marketing considerations. They're a 3-way speaker in that they have 3 different types of drivers, and it would be too complicated to explain to the average consumer or listener, or even most hifi enthusiasts back then, that the different woofers and mids have different crossover frequencies.
