• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

High end speaker wire

I have made the promise that I not bring any flaming war more about this subject. However It keeps mine attention. I peronaly have made the mistake to judge about other peoples hearing and that was not correct off me so I am sory herefore. When I reed back than I made the conclusion that there are (free spoken) people ho hear the difference, there are people ho dont hear the difference en there ar people ho will try it out for themselfs to investigate the subject to make there own judgement. When I think further then there are severall things in live off the same kind of matter to discus about. There are people ho believe in gost and other people dont. There are people ho believe in god and others dont. There are people ho puts dope in there gasoline and believe that the car will drive cheaper and others dont. So these are some simple examples and I think we all could find a lot off other subjects to discuss about. Everybody knows that some facts are subjectif and some facts are objectif. Also there are facts that are investigated by engineers and there are facts there are invastigated by non engineers. So for me personaly I think that the subject never will be solved because WE ARE PEOPLE. And every one has his own believes and dont believes. His own enginering and his own non engineerings. Personaly I have done my own engineerings and made my conclusions and have stayed them on a wrong way. So again herewith my excuses. About one thing I keep thinking. Why is only the audio world "obsessed" about wiring? I dont need an answer but it is "funny"

I have an answer for you:

The audiophile community always searched the sources for subtle differences in human perception in transcendent things, which can't be judged by scientific evidence (This could be the very first fundamental law of subjectivism). Or to say it more clearly: Religion !

And what could be better as a religious item in this sense than speaker cables, the least important segment in the chain ?

I can easily hear a difference between 0.1%THD and 0.00001%THD, but if I had to believe the majority of the audiophile people (the believers), the 0.1% always would sound better (too simplicistic circuitry, audio transformers, tubes, oil/paper capacitors, vinyl, ultra high capacity interconnects, Class D amplifiers, even MP3 and many other "en vogue" items)

That's really devastating ! :tears::tears::tears:

Many of the believers obviously forgot, that the highest "art of audio" is still a deep knowledge in engineering and that the only dependable absolute reference for audio reproduction is reality (and not ears or personal taste or whatsoever).
 
There are a lot of interseting aspects to this. I mentioned in a previous post that it would help if there were some quantitative measurements that would show the differences or lack thereof. So why can't this be measured? Why can't a waveform be analyzed both ways for comparison? What would the measurement be? Distortion? Dynamic range? What? That, to me, is the most obvious question that should be asked.

The problem with measurements, IMO, is they will virtually always show a difference.

The real issue is not whether a machine can detect such things because clearly they can. It's the machines that already quantify the electrical properties R, C, and L of the cables.

For a case in point, a scanning electron microscope can see things and details that the unaided eye cannot.
 
I recommend anyone doing a search through Bully's posts on the subject in this very forum. He was very much a believer in the idea that all "patch cords" are the same until he heard the difference in his own system. If anyone was a non-believer in cables making a difference, it was Pete....

Very interesting stuff......thanks for the heads up.
 
Many of the believers obviously forgot, that the highest "art of audio" is still a deep knowledge in engineering and that the only dependable absolute reference for audio reproduction is reality (and not ears or personal taste or whatsoever).
If this were an absolute truth, then I ask you does vinyl sound so much better than digital to so many people, when digital always "measures better?"
 
Very interesting stuff......thanks for the heads up.

My pleasure!
There are tons of great tests and reviews scattered all over TOL. LOTS of guys who though it was BS tried different cables in their own systems and became believers. Plenty of good reading!
 
If this were an absolute truth, then I ask you does vinyl sound so much better than digital to so many people, when digital always "measures better?"

Not sure that's the point of the comment. But, regardless of that, one possible explaination is that what sounds good is subjective.

Another possible explaination is that this is primarily a vintage forum, and it's been observed that any number of people consider computer-based sound to be essentially sacrilegious.

Also, "measures better" in what regard? You can have a medium that is capable of excellent specs, but if the stuff put on the medium is crap, it still sounds like crap. For many years now, much of the music put on CDs has been subject to heavy compression. That's not a flaw in the medium, that's a flaw in the decision making process, re: louder = better.
 
My E.J Jordan towers say there's little or no difference other than a dB or two on the top end with all the SPEAKER wire I've tried... the B&W 803S might sing another tune...hmm

I'd like to point out I could measure no serious difference either.
 
If this were an absolute truth, then I ask you does vinyl sound so much better than digital to so many people, when digital always "measures better?"

The answer is simple: Many music lovers were disappointed of the CD (for some good reasons), so they think digital is bad, but this kind of digital they mean is as old as 1979 !

e.g. PCM at 44.1 kHz measures e.g. much worse than any analog medium in the response to a Dirac pulse (digital filter ringing).
Even if you would use a non oversampling DAC, then there is still the ringing of the ADCs used for recording/mastering (-> CD can sound worse than vinyl).

But go to DVD-A (192 kHz PCM), DXD (768 kHz PCM) or SACD (DSD) and you will see that Vinyl will measure and sound much worse ...

So state of the art technology gives an answer here, which simply has to be recognised by the majority of the crowd, which probably still seems to live in 1979 in their opinions ...
 
I enjoy the sound of SACD's, but still prefer vinyl.

As for my opinion being from 1979, I was only 3. :rolleyes:

Another example of what looks better on paper, but may not sound better is SS vs. valve amps.
 
Some words of wisdom that seem to fit this discussion.

"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not."--Nelson Pass
 
Some words of wisdom that seem to fit this discussion.

"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not."--Nelson Pass

Thank you!
 
Some words of wisdom that seem to fit this discussion.

"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not."--Nelson Pass

I wouldn't disagree with that, but it is a little beside the point. The number I really care about is measured in $$$$$. Sure, I can believe that wire makes a difference in your sound...I just don't know that you need to spend $200-300 or more on speaker wire. If I had that kind of rat-hole money now, I would try it.
 
I wouldn't disagree with that, but it is a little beside the point. The number I really care about is measured in $$$$$. Sure, I can believe that wire makes a difference in your sound...I just don't know that you need to spend $200-300 or more on speaker wire. If I had that kind of rat-hole money now, I would try it.

Who ever said you had to pay that kind of money for good quality speaker wire? There are lots of great options out there that don't require that kind of outlay of cash.
 
I try to find the best speaker wire that I can find and that I think sounds the best to my ears in my system and buy em! At this time I am running cryo treated silver strands ( four each cable twisted 18 g) with spades on one end and nothin ( on amp ends) and for the money they are the best I could find, period. Are there better?-of course!-are there worse?-of course!.....do I care? Not at all, cuz I am not listening to them in my living room.......................
 
Who ever said you had to pay that kind of money for good quality speaker wire? There are lots of great options out there that don't require that kind of outlay of cash.

Great! It's just that I keep reading that some have tried many different wires, and they all sound different, and it's a matter of finding one that is a good match to their gear and their hearing. Is it fair to assume that these various cables vary in price? How about widely vary?

I have 4-conductor #14 Monster Cable that I'm using in my theater room for the mains right now. At the dealer I was told that customers really needing only 2 conductors per run (me, for instance) have used this cable by doubling up, resulting in something like #10 or bigger. What I'll do is move these "homemade" cables to the bedroom where my McGear is and compare to the #16 zip cord (sold as "speaker wire") I'm using now. In the theater room I'm using a sub, and the mains are pretty small, so it'll be easier this way.

Does this method (doubling the 4-conductor Monster Cable) ring a bell with anyone?
 
Finished rewiring my speakers yesterday, so the wife and I kicked back and cranked up Rush's Permanent Waves on MFSL 180g vinyl. Got every drop of clean power out of the MC752 and it sounded great. I cut the double Monster Cables to make the runs short as possible - 7' and 4 '. I'm inclined to say that it made an improvent, but I wish I had listened to the same album right before rewiring. Also, my speakers are not quite what you need to reveal everything to call this an experiment on speaker wire. But this is probably the best sound I'll ever get from these Bostons.
Like I said, it sounded great last night, but it sounded great before. Still, my impression is that I got improved dynamics. Highs very crisp and clear. It certainly didn't hurt.
Mr. Gow and Mr. Russell said I would hear no difference at all, though. The #16 wire I was using is within the parameters he says will give the best results. Could it be that they were full of the proverbial soft squishy stuff?
 
Last edited:
Here is the old McIntosh speaker wire table:

Maximum Wire Lengths For TWO CONDUCTOR Copper Wire

Wire Size 2 ohm load 4 ohm load 6 ohm load 8 ohm load
22 AWG 3 feet max 6 feet max 9 feet max 12 feet max
20 AWG 5 feet max 10 feet max 15 feet max 20 feet max
18 AWG 8 feet max 16 feet max 24 feet max 32 feet max
16 AWG 12 feet max 24 feet max 36 feet max 48 feet max
14 AWG 20 feet max 40 feet max 60 feet** 80 feet**
12 AWG 30 feet max 60 feet** 90 feet** 120 feet**
10 AWG 50 feet max 100 feet** 150 feet** 200 feet**

They printed this table in all McIntosh owner's manuals for amps and speakers. After the speaker wire industry really got going, McIntosh ceased the printing of this table in their owner's manuals.

The first thing that jumps out is that wattage is not a consideration. I wonder what McIntosh uses to wire the 2000 WPC "Dare to Dream" system?
 
Mr. Gow and Mr. Russell said I would hear no difference at all, though. The #16 wire I was using is within the parameters he says will give the best results. Could it be that they were full of the proverbial soft squishy stuff?

Hmmm... you trust McIntosh to design and build complex items like amplifiers, but they can't be trusted to know about wire? :scratch2:
 
Back
Top Bottom