• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

TECHNICS SL-1200GR2

So the more I listened to the GR2/Parasound JC3 Jr combo, the less impressed became, the little Skoll sounds so much better. But I want to leave the Skoll in the office to use with the Rega/SRM Tech Azure so I borrowed my buddies phono amp (his Emotiva amp is in for repairs). It is a five year old Pro-ject Tube Box DS2...wow the sound is incredible with that box in the mix. I have played it nearly non-stop all weekend. The wife even noticed the difference in sound and loves it, so I ordered one :)
 
So the more I listened to the GR2/Parasound JC3 Jr combo, the less impressed became, the little Skoll sounds so much better. But I want to leave the Skoll in the office to use with the Rega/SRM Tech Azure so I borrowed my buddies phono amp (his Emotiva amp is in for repairs). It is a five year old Pro-ject Tube Box DS2...wow the sound is incredible with that box in the mix. I have played it nearly non-stop all weekend. The wife even noticed the difference in sound and loves it, so I ordered one :)
The Pro-Ject Tube Box DS enjoys a good pair of tubes. I like the 12AX7A (or 7025), but my favorite is the 5751 tube. Raytheon windmills. :thumbsup:
 
The Pro-Ject Tube Box DS enjoys a good pair of tubes. I like the 12AX7A (or 7025), but my favorite is the 5751 tube. Raytheon windmills. :thumbsup:
I looked for those, crazy money if you can find the Raytheon 5751 ($200 each). Some RCA 7025 tall plate ones are easier to find, but also a bit on the pricey side.
 
I looked for those, crazy money if you can find the Raytheon 5751 ($200 each). Some RCA 7025 tall plate ones are easier to find, but also a bit on the pricey side.
I tried some European-made ECC83s (Miniwatt, Mullard, Amperex); they are good but not as good as US-made mil-spec tubes in this phono pre-amp.

Sylvania triple mica black plates 5751 are excellent, as were the Raytheon BP 12AX7. But for my setup, the windmills are noticeably better. I heard the clarity and imaging right away.

This is my experience and my ears. By the way, I have all these tubes in my stash, so I don't know what they cost today.

Pro-ject phono box DS2 (5751) 2 (SMALL).jpg


Sideshow.
Blue Magic - ATCO Records. SD 7038. Presswell pressing. 1974.
Run-out: ST-C-733001-B AT GP PR

_____________

Using a 2-amp Meanwell Medical-Hospital Grade power supply (the quietest one I've found).

Raytheon 5751 black plate windmill tubes. Sony 2251 with Denon DL-103Sa cartridge. Soundsmith boron cantilever and nude contact line modification. Zero pico-farads, 200-ohm loading, 65dB gain settings on the Pro-ject.

Close-mic'ed (18 inches from speakers) with AKG C414 mics. Subwoofers on.

:)
 
Last edited:
I found a matched set of Jan-GE 5751s for $99. I'll run the stock tubes for a while then sub these in to see which I like better. The 5751 is supposed to be designed for less gain in favor of lower noise and microphonics and a warmer sound than a 12AX7 tube.
 
I found a matched set of Jan-GE 5751s for $99. I'll run the stock tubes for a while then sub these in to see which I like better. The 5751 is supposed to be designed for less gain in favor of lower noise and microphonics and a warmer sound than a 12AX7 tube.
I did not notice any gain differences. The tube may be in a buffer position. :idea:

It does have a tonal effect. :)

Good luck with those GEs. Are they dual or triple mica?
 
Last edited:
I did not notice any gain differences. The tube may be in a buffer position. :idea:

It does have a tonal effect. :)

Good luck with those GEs. Are they dual or triple mica?
Just double mica, but it appears to be much thicker than normal, when zoomed in it looks like two stacked on top of each other for four total (maybe???)
002_JAN-GE-5751-1.jpg002  JAN-GE-5751-1.jpg
 
Last edited:
I believe that JAN specs for 5751 include high-G loads. So, mica and plates are heavier duty than standard commercial 12AX7 tubes.
 
Nutz. Literally the day I order a Darlington labs phono preamp (MP7B) I learn about all these tasty tube preamps after discovering this thread.
 
As we speak about Phono Preamps... My two Fonky units from the DIY department to go with my SL-1200G and VM540ML :

yQ68Qb-P1190185.jpg


mS0BQb-The-MICRO-PREAMP-30-08-23.jpg


:biggrin:;)

T
 
So my new Pro-Ject Tube Box DS2 came at 9:00AM and I have been playing with it, my Schiit Skoll, and my Parasound JC3 Jr-- swapping them in and out of three systems to see which works best with what. After much monkeying around I have settled on the DS2 in the main system (serious synergy with the Freya+ in tube mode and the SL1200GR2 with the Ortofon Concorde Music Bronze cart). The Skoll will stay in the office with the Rega/SRM Tech Azure with AT-VM540ML cart, a great combo as I can get the capacitive load just right with the Skoll...the JC3 Jr is going on US Audio Mart on Friday.

It has been very hot here lately and I've got Ice Cream on my mind, so I'm going to rate these three preamps as Ice Cream (and I love chocolate the most):

Parasound JC3 Jr: a double scoop of creamy French Vanilla- not bad, just not as good as the next in line...

Schiit Skoll: triple scoop of Chocolate Fudge Chunk with some Hersey's Chocolate Syrup- outstanding !

Pro-Ject Tube Box DS2: triple scoop of Chocolate Fudge Chunk with some Hersey's Chocolate Syrup and a dab of whipped cream on top- outstanding + (take the Skoll and sweeten it up just a bit)
DS2  001.jpg
DS2  002.jpg
 
So my new Pro-Ject Tube Box DS2 came at 9:00AM and I have been playing with it, my Schiit Skoll, and my Parasound JC3 Jr-- swapping them in and out of three systems to see which works best with what. After much monkeying around I have settled on the DS2 in the main system (serious synergy with the Freya+ in tube mode and the SL1200GR2 with the Ortofon Concorde Music Bronze cart). The Skoll will stay in the office with the Rega/SRM Tech Azure with AT-VM540ML cart, a great combo as I can get the capacitive load just right with the Skoll...the JC3 Jr is going on US Audio Mart on Friday.

It has been very hot here lately and I've got Ice Cream on my mind, so I'm going to rate these three preamps as Ice Cream (and I love chocolate the most):

Parasound JC3 Jr: a double scoop of creamy French Vanilla- not bad, just not as good as the next in line...

Schiit Skoll: triple scoop of Chocolate Fudge Chunk with some Hersey's Chocolate Syrup- outstanding !

Pro-Ject Tube Box DS2: triple scoop of Chocolate Fudge Chunk with some Hersey's Chocolate Syrup and a dab of whipped cream on top- outstanding + (take the Skoll and sweeten it up just a bit)
After a day or two, to let the desert digest, what is your opinion?

Thanks!
 
After a day or two, to let the desert digest, what is your opinion?

Thanks!
Well I can't play it today as Thursday is my wife's "work from home day" so I have to be very very quiet (said in an Elmer Fudd voice) from 7:00AM to 5:30PM. Yesterday I noted that the DS2 developed a very wide and deep sound stage after about 2 hours of playing. The Concorde Music Bronze cart really likes the DS2, the bass is well pronounced and the highs have a nice sparkle. I basically have the Schiit Loki Max EQ set flat, just three clicks down at 6KHZ. I think the DS2 was designed using Ortofon carts and it shows it's stuff with the Concorde (both Pro-Ject and Ortofon are made in Europe). Anyway, it is definitely a keeper !

Conversely, the DS2 wasn't as good with the VM540ML cart on the Rega/Azure table which really loves the Skoll- the DS2 was just a bit on the bright side. The VM95ML on the old Marantz table also sounded best with the Skoll ( the tubes in the DS2 probably need a bit more time on them).

The JC3 Jr was just lacking dynamics with any of the three carts- it only seemed to work best with the crappy Rega Exact 2 cart when I had that on my P3 50th Anniversary Edition table. I dug the box for the JC3 Jr out of the attic, it is going up for sale (It would be great in a different system).
 
I swapped in the GE-JAN 5751 tubes this evening and left the unit on for several hours (nice glow from these), I'll get to play them tomorrow after I get back from the gym.
The tubes that came with it are shorter and much fatter than the 5751s, but I don't know what brand they are as the "tube cooler" covers most of them. They are probably JJ12AX7s, maybe Tong-Sols...anyway they are not bad at all, but I'm looking forward to see what the 5751s sound like. From what I could tell, it looks like the 18V wall wart power is bumped up to 150V in the power section (right side with three fat capacitors). Should be plenty of power and should makes the tubes last a good long time (IIRC, the 12AX7s in my Fender guitar amp run 220V).

Earlier this evening, before the tube roll, I had ZZ Tops "Afterburner" album playing- wow Billy Gibbon's guitar tone was so thick I could have cut it with a knife ! I popped my 50th anniversary edition of DSOTM on next but that did not sound all that good- everything was way in the background and a bit muffled. It gets first dibs with the new tubes.
GE-JAN 5751Tubes 003.jpgGE-JAN 5751 tubes 001.jpg
 
Phono_pre-amp_power_supplies.jpg

For your information, these two PSUs I tried have the lowest noise. UpBright has 4.6mVAC riding on top of the 18VDC, and the Meanwell has 5.2mVAC.

The OEM wall wart that came with the unit has 12mVAC.
 
Last edited:
I found the same song comparison of OEM PSU and Meanwell.

In one of my early recordings, OEM PSU, you can hear the AC noise in the lead-in.

Later, recording with the Meanwell PSU. The 2-amp PSU seems to give the sound slightly better dynamics. It could be the lower floor noise. :idea:

My recording techniques, mic, sound panel placement, volume levels of the mixer, and camera improved greatly between the first and second videos. But, the floor noise is lower with the better PSU.
 
Last edited:
So I played the DS2 for four hours with the GE-JAN 5751 tubes..they started out really good- wide sound stage, great channel separation, and very clear mids -voices were excellent. After 90 mins or so they started to get a bit bright so I applied some EQ to tame that which worked well for an hour, but then they became fatiguing- my poor old ears didn't want to listen anymore. Just a tad too harsh for my system (my Monitor Audio Silver 500s are known to be a bright speaker). I ordered one of the Mean Well power supplies as I did notice a tiny bit of noise that was probably coming from the super cheap power supply it came with.

I put the stock JJ / Tong-Sol tubes with the "coolers" back in and it was nice and sweet again- I guess I'll save the 5751 tunes for my guitar amp. I did a little reading on the "coolers" and found they are actually more for vibration damping than cooling

JJ tubes 001.jpg
 
Last edited:
Back
Top Bottom