• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

anti-skate

  1. M

    Sansui SR-323 Anti-Skate Weight Setup

    I have the original bias weight for this table and it was setup. I turned it over to access the bottom and forgot to take the weight off first; it fell off and I cannot fit the life of me figure out how it's originally attached. There is no reference to this metal peg on the end of the wire...
  2. I

    Luxman PD-264: Anti-Skating Not Working – AS Dial Moves Rod, No Effect

    Hi all, I’m dealing with an anti-skating issue on my Luxman PD-264. No matter how I adjust the dial (I’ve turned it fully each way), the tonearm consistently pulls toward the center. I see that the anti-skating dial pivots a thin rod underneath. The rod stretches from its pivot point into the...
  3. Aillo

    Reloop anti-skate problem

    Hello, I have a Reloop RP-1000 MK3 turntable that I have been using for ten years now. I noticed on a calibration record that the anti-skate knob does really a little. When I set it to the maximum amount (7), it slows down the inner movement of the arm, but it still gravitates towards the...
  4. Aillo

    Dual HS 130 tracking and anti-skate

    Hello everyone, I use a Reloop turntable in my living room, but I recently received an old Dual HS 130 so I am using it instead. It was in a bad shape and I restored it: cleaned, greased, recaped, changed certain pots as well. I also replaced the head and the stylus (with Tonar equivalent of...
  5. W

    Yamaha YP-211 Anti-skate weight?

    I have a new to me Yamaha YP-211 with a Ortofon Red stylus. The deck needs a new belt which has been tricky to find and it doesn’t have the anti skate line or weight on it. I was thinking about getting some fishing line and a few different sized fishing weights or small metric nuts as the anti...
  6. Homebrook

    Grace G-707 Tonearm: How to Set the Antiskate

    I have recently come to own a Kenwood KD-550 turntable with a Grace G-707 tonearm. I have set it up as best I can carefully following the directions in the manual. I think I have it mostly set up properly, and it does seem to be working well. However the one thing I am not entirely sure of is...
  7. C

    Weird SL-1200 Anti-Skate Issue

    Hey, guys. I have a Technics SL-1200MK2 and the anti-skate control is acting up really strangely. It seems to function properly, i.e. turning the knob will impart some movement on the tonearm when floating, but any time I turn it above 2 or so, it turns itself back down to a lower number. It...
  8. AcetCm

    Hitachi PS-12 Anti-Skate

    I recently ordered the Hitachi PS-12 TT, I haven’t got it yet but I’ve seen some pictures and I wonder how the anti-skate works or how I’ll adjust it. It’s different. I’m new to this so I don’t know that there’s other types of anti-skate. here’s a link to the pictures...
  9. S

    Marantz 6100 Anti Skate question

    Hello. I'm restoring a 6100 for a friend. First one I have come across. The TT came with a weight attached, and one in a stapled bag like it has never been used. One issue, is the one on the turntable, attached to the rod, cannot be moved among the notches to adjust the anti-skate- its as if...
  10. Attila S.

    Reloop 7000 MK2 – anti-skate & tonearm issues?

    I would like to ask for your kind help and opinion on my Reloop 7000 MK2 turntable. I bought one and I found that it adds an unpleasant twang to the drums. It is like the drum twangs something in the turntable. Then I found if I push down the turntable’s top left and right side with great force...
  11. D

    Tracking problems and occasional distortion - Kenwood KD-2070

    Greetings all. I am new to vinyl and new to the forum. I have recently pulled out my old Kenwood KD-2070 which I have had packed up for the last 20 years or so. I lubed the mechanisms and cleaned the pots etc and got it working quite well. I thought. It seems to skip really easily - I have to...
  12. CZ4A

    Onkyo anti-skate not staying in position

    The anti-skate mechanism of my Onkyo CP-1015A isn't staying in the place where I set it. As you can see from the pictures it is a slider mechanism. The slider pulls on a spring that in turn pulls on the tonearm. The spring pulls the slider almost to the "off" position once the stylus hits the...
  13. Tracy Brink

    Pioneer PL-518 Tonearm Adjustments

    I just purchased a Pioneer PL-518 that needs some restoration, and I am trying to check out its operation capabilities right now. The existing cartridge is an ADC XLM MKII Improved, and I checked the wiring which had the RG and RS wires backwards which I have corrected. I have not checked to see...
  14. hotrodman21

    Pioneer PL-50 Broken Anti-Bias

    Good Evening All, I apologize for such a short post, as my phone is about to die. Just got home from the local record shop this afternoon, when I noticed one of my LP's sounded distorted. Noticing this, I checked my alignment. After seeing everything was fine, i decided to adjust the anti-bias...
  15. J

    Sound very quiet in one speaker

    So I just got my first record setup-a Sansui FR-D3 and a Kenwood KA-5700 and everything seems to be going great (my life is forever changed). However, often times sound coming from specific parts in records (not all of them) will only come from one speaker (the right one) while the left side...
Back
Top Bottom