Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
In home theater, what are the differences among AVR, AVC, and AVP? I know AVR is an all-in-one unit much like the vintage receivers (Sansui 9090 etc.), but how about AVC and AVP? Especially with Denon, most of their models carry one of those acronyms, can I identify their category just by...
Hello,
I'm going through a nice Denon PMA-701 amp. Seems a bit cheap in manufacture, but worth restoring.
The tone control uses a number of 2SC1775 and 2SC1000. Haven't replaced any yet.
The output stage also has a pair of 2SC1775 which I plan to replace by 2SC1845 unless there is a better...
I recently purchased a Denon DP-47F turntable and everything was functional except I noticed tracking issues. This table is supposed to be an exceptional tracker so obviously something was amiss. I turned the VR5 pot (tracking weight potentiometer) all the way and still the issue was not...
Howdy,
I purchased a Denon DP-80 with a DK-300 plinth. The plinth has a hole for a tonearm however I'm unsure of what sort of tonearm would properly mount into this hole.
More info/photos can be found here:
https://page.auctions.yahoo.co.jp/jp/auction/d1095499595
Unfortunately I do not yet...
Hi everyone,
I'm looking for a pair of bookshelves for my 5.1, with a Denon AVR-660H. I don't listen at loud volumes as my kids sleep early.
I have a small living room, about 12 feet by 12 feet, with the back of the couch open to the dining room, also the same size. I have some Polk Audio RM201...
Looking for repair parts for a Denon DVD-3800 player.
Need a Spindle platter or Spindle platter with motor to replace one that is damaged.
Any suggestions ?
I have a Denon PMA-600NE that has a Euro plug. I have brought it back over here to the states and understand that I have to use a step up transformer to give it the 230V it requires.
Would love to have some solid suggestions on what to use to run this integrated amp safely.
I have read that...
I'm not sure if this really counts as vintage, the owner said he thought he bought it 15 years ago. It would power on the display and then turn off during the system self check, and the stand-by light would flash fairly rapidly. I'm only posting this here because this symptom was posted on other...
I have a Denon DRA-395 with a multi zone feature. In addition to the main "zone 1" it has zone 2 and zone 3 rca outputs. These zones allow the same or different program that is on in zone 1 to go to a different room. The advantage is the second and third room source, volume, etc. can be...
Hello everybody.
I am trying to find a fix for my 1991 Denon receiver DRA-435R. It has a very pleasing sound and has all the features that I need. I got it from a thrift shop and after listening to it for some time -- I'd like to keep it. Though I have others too :))
But it has a problem. It...
I’ve been using an old analog HK twin amp to run JBL Jubels. We mainly stream digital music through an audioengine B1. We also play play vinyl as well, though not as frequently. I want to upgrade to something newer that will drive the JBLs. We don’t really need all the home theater “stuff” but...
I’m a huge fan of the DL 103D, but just rotated in a 103M for the first time and wow, it’s a fantastic cartridge
Just a few months ago @Mister Pig suggested the 103M, not sure why I waited so long to try it:dunno:
Here’s some particulars…
The Denon DL 103M
Special elliptical stylus
Special...
I have a denon sa-3900 amplifier that is quieter in one of the channels. I have thoroughly cleaned the switches and pots but that doesn't seem to be the issue. I have been pulling all the electrolytic capacitors of the board to check them but most seem to be within 20% of their rated value. So...
Hello Everyone,
Hopefully this isn’t too many questions for one post, it’s always a rabbit hole trying to figure stuff out.
I recently pulled a DRA-750 and BX-150 out of what looked like a dungeon at an estate sale. The BX was super clean but needed an assembly transplant from my BX-125 (also...
I got this amplifier a while ago and I noticed that the fuse on one of the channels was blown (I think it's the right one). I measured the output transistors and the ones for the defective channel where shorted. I ordered some new ones and installed them (for both channels since I read online...
Hello everyone, i have a Pioneer SX-590 receiver with a problem on FM stereo. when i put it into mono, FM sound is fine, VU meters move.but when i switch to stereo, sound almost inaudible even in high volume, vu meters not moving and stereo light not lighting. pots are all cleaned. aux and other...
All
I recently picked up a Denon DP-23F in fully working condition except for the stylus was bent / broken at first glance. The whole unit was only $20 at a thrift store. Getting home I found that the cartridge was a MC High-output Denon DL-160. What was left of the stylus fell off down to a...
Hey everyone, hope I am not breaking any rules with this first post, but I have just arrived, and I am still getting costumed (used to be more active around here, but the latest years draw my focus elsewhere!) to the AudioKarma way =)
TLDR: I need help choosing which devices to keep and restore...
Hello everyone, i have a problem with my Sansui G-4700. Left channel burns the RESISTORS 01 and 05. I already changed the transistors 01, 03, 05, 07, 09, 11, 13, 15, 17, 19, 21 and 23. i changed also the 470uf 50v capacitor for the left channel. also i changed the VR07 for the bias, capacitors...
I own a Denon DP47F and recently the servo control of the arm (left/ right) has stopped functioning. Pressing the directional button results in the tonearm assembly moving slightly (about 1/8") but that's it.
Any suggestions on what I can look for if I open her up? Everything else works...
Hi All,
I am new on here and while not a true audiophile.
I do love music. And I love a system that images well, has large dynamics, and has a broad soundstage.
I listen to a mix of classic rock and contemporary Jazz. (think mostly Al Di Meola and other artists along this genre)
I have a nice...
I recently Purchased a Denon DP-37F Online not realizing its missing the entire headshell. (Rookie mistake i know)
I read up on the manual online and it calls out for a Denon PCL-30BK Headshell replacement and DL-65 Cartridge i have looked everywhere online and can not find one in stock...
I recently Purchased a Denon DP-37F Online not realizing its missing the entire headshell. (Rookie mistake i know)
I read up on the manual i found online and it says it requires the Denon pcl 30bk headshell. And i can not find a match online ANYWHERE. It contains the Dynamic Servo Tracer...
hello mates, i have a problem with my JVC 4MM-1000 receiver, left channel sounds weaker. i already cleaned all pots and switches but still the same. any idea where to look at first? thanks