• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

denon

  1. JoeMae416

    Nikko, dbx, Nakamichi, Denon, Akai, Ohm

    My current system.
  2. M

    Denon DVD-5900 Firmware Update

    Would anyone know of a way to obtain the Firmware for a Denon DVD-5900. I've contacted Denon support and they no longer supply the firmware for the device. The Denon service centers I contacted all said they do not have the firmware. They originally came on 2 discs, or 2 downloadable disc...
  3. P

    Denon AVR-X3300 Setup menu clicks...

    Hi everyone. I have fully working AVR-X3300 that one's in the awhile switches to Setup Menu by itself. Very random. Sometimes it's once in hour, sometimes it does it a few times in 5 min. Like someone pressed the "Setup" button on the remote. Relay clicks and Setup Menu appears. There is an...
  4. Mikhail

    Denon AVP-8000 no output from RCA to power amp

    Hi all, I recently picked up an AVP-8000 preamp from Denon and am flummoxed as to why the RCA outputs to the amplifier are not working. None of the outputs work except headphone which sounds amazing. No distortion, both channels work great. Yes it was a great deal and I figured since there...
    • Mikhail
    • Thread
    • avp-8000 denon preamp troubleshooting
    • Replies: 9
    • Forum: Solid State
  5. dgoldstein78

    Middle Aged in the Middle of Jersey

    hello all, just joined... am from Brick. As the title indicates, I'm a Gen-Xer. What brought me here were several recapping threads on the NAD 7020 receiver. Because I'm likely inheriting from my late mother-in-law: Denon DP-30L NAD 6150C cassette deck NAD 7020 receiver (unsure of rev# yet)...
  6. PE9ZZ

    Denon PMA-790 eats fuses (but not anymore)

    I got this great amp in after an extensive repair/refurb. The refurb was valid only the amp returned with the complaint "blown fuses". Indeed, the fuses in the line for the power output (2x 6.3AT) had failed. Could not find anything amiss but upon returning the amp the fuses were found to be...
    • PE9ZZ
    • Thread
    • denon fuse pma-790 toroid transformer
    • Replies: 6
    • Forum: Solid State
  7. Tomos

    Denon DRA-700AE - no sound on one channel at certain volume levels

    Hello, I just bought a 2nd hand Denon DRA-700AE that turns out to have a strange issue: no sound on the left channel whenever the master volume is at certain levels, precisely every 8 dB: +12 dB <-> +6 dB: works +6 dB <-> -2 dB: doesn't work -2 dB <-> -10 dB: works -10 dB <-> 18 dB: doesn't...
    • Tomos
    • Thread
    • denon dra-700ae every 8db integrated circuit left channel cutting out njw1197 volume control volume ic
    • Replies: 0
    • Forum: Solid State
  8. ddilillo

    Advice on Denon DP-60L arm lift

    There is a Denon DP-60L for sale near me. Cosmetically it is pristine. I mean, like it came out of the box yesterday. The platter spins and holds its speed nicely. Silent motor. However, the “lift” button that raises and lowers the tonearm doesn’t work. On one try I saw the arm move up and down...
  9. D

    I'm new here and I'm 50 years out of phase. Tennessee & Texas

    Thanks all for such a great meeting of minds and discussion of topics that have no bounds. I am originally from Tennessee but spend most of my time in Texas. Nashville area and Frisco to be exact. My collection of audio gear was primarily acquired in the 70's with some additions in the...
    • dew0707
    • Thread
    • denon dual infinity jvc luxman mcintosh nht sae
    • Replies: 21
    • Forum: Introductions
  10. Beavs

    Denon PMA-850 Troubleshoot

    I've got a Denon PMA-850 with a weak right channel (also sometimes distorted, but mostly just weak). Balance pot resistance wasn't reading evenly between L/R channels so I replaced that with a new Alps pot thinking it would fix it but it didn't (VR4 in attached pic). Issue is not in the power...
    • Beavs
    • Thread
    • denon distorted channel integrated amplfier pma-850 weak channel
    • Replies: 4
    • Forum: Solid State
  11. AL01

    Denon PMA-1600NE or AU-517?

    I can't help but peruse the internet every now and then; low and behold, I am beginning to see PMA-1600NEs pop up for around a grand. My beloved AU-517 is bound for a full restoration soon, and it will end up costing me a grand, (including what I paid for the unit.) So has anybody been able...
    • AL01
    • Thread
    • denon sansui au 517
    • Replies: 0
    • Forum: Solid State
  12. I_Wanna_Rock

    Received my pcl-S Denon S arm / head shell

    OK I received my Denon S arm today and also the head shell that I purchased. I’m not sure if I’ve got the right one, (head shell) though. I’ve only had a straight arm since I’ve owned the system, here’s some pics…, help please! The head shell is from LP Gear, it’s the “Zupreme head shell”. I’m...
  13. theseeker2

    Denon DRM-500 NOS motor

    I'm looking to buy a NOS replacement motor for my Denon DRM-500 cassette deck. The motor in question is shown in the picture below (Mabuchi EG-500AD-2B). I took it to my local turntable tech, and in his words those motors are "gone gosling." This deck has a lot of sentimental value for me...
    • theseeker2
    • Thread
    • cassette denon motor nos wanted to buy
    • Replies: 12
    • Forum: Tape
  14. James Cox

    Denon DP-6000 restoration help

    So my denon DP-6000 started having issues switching to 45rpm while I had it set to 33. I decided to open it up and clean and lube all the controls and make a list of capacitors to possibly recap it in the future. My problem is when I removed the platter and flipped it over this 2 reflective...
    • James Cox
    • Thread
    • denon direct drive dp-6000 turntable
    • Replies: 10
    • Forum: Turntables
  15. T

    Denon 2030CI Remote Replacement and Pairing Question

    Long time listener, first time caller... I recently picked up a very nice, used Denon DVD-2030CI for CDs and SACDs. It works just fine and I'm happy with it. However, it did not come with a remote. I found a replacement (RC-1037) on ebay for a not so cool $30. However, this replacement remote...
  16. T

    7.1.4 Dual Receiver Config

    Hello All, I have a Denon x3700h and an older Yamaha v2095 receiver that I want to use for my 7.1.4 setup. My Speakers: 2x Fronts: 4ohm (Emotiva T0+) 1x Center: 4 ohm (Emotiva (C2+) 2x Rear: 8 ohm (Emotiva E2+) 2x L/R Surrounds: 8ohm (Emotiva E2+) 4x Heights: 8ohm (Sonance MAG6R) The Denon...
  17. D

    Denon DP Series .. I need somebody Help! Not just anybody Help!

    Ok here is where i am at.. I have a new old stock Denon DP6000 and a DP200G Plinth. Installed on the plinth i have a 2 handmade tonearms, one a 9 inch replica of a Thorens TP13 and a 12 inch unipivot. Here is my problem..The DP6000 has speed issues, moves very slow and stops after awhile. I had...
  18. D

    Narrowed Down to 3 Options, which turntable would be the best?

    As stated in the title, I’ve finally gotten to what I’m hoping is the end of the hunt for a new turntable, in order to upgrade from my current Audio Technica 1240XP. The 3 options I have right now (all used) are a Pioneer PL-707 (unknown service history atm, however functions have all been...
    • Deleted member 349134
    • Thread
    • advice automatic buying denon dp-57m dp-61f manual pioneer pl-707 turntable
    • Replies: 19
    • Forum: Turntables
  19. DoctorJon

    Cartridge question.

    Hey quick question. I ordered a new cartridge for my Denon Dp30l. https://www.ebay.com/itm/164896750087?hash=item26649cba07:g:bfcAAOSwaddguRQu It turns out i didnt need it. Can i effectively use this cartridge on my Pioneer pl-10 turntable? Its a cheaper cartridge and needle and i was just...
  20. smatchymo

    Would the Denon DVD-2910 be a reliable SACD player? I've had issues with Sony.

    I've seen people mention how the Sony players stop reading SACD after a few years and will only play the regular CD format on hybrid discs. There is a Denon DVD-2910 for sale nearby but they're asking more than I wanted to spend. Would this unit be more reliable or will most brands that I find...
  21. S

    Denon DP-23F vs DP-7F

    Hello! I have been playing a Denon DP-23F but just picked up a DP-7F. I think I like the 23F better but does anyone have any input on the +/- of each of them? I know they are both CBP but...
  22. slong02

    Denon PMA-700V Integrated Amp

    There is one For Sale in my area that I am considering. Would like feedback on this unit. 1) Is it any good? 2) Can it be used as a Preamplifier? 3) Any known issues? thanks for any feedback. Helps with buying decision.
    • slong02
    • Thread
    • denon integrated amplifier vintage
    • Replies: 6
    • Forum: Solid State
  23. Zibe

    Pennsylvania Rocker

    It's my birthday and this is me: Eddie I've got a question and I've read the introduction protocol. Therefore, I'll carry my question to an appropriate forum. Northeast PA, and I'm a hard rockin', volume twisting, speaker straining, Blue Oyster Cult song playin', easy rider! I've received so...
    • Zibe
    • Thread
    • denon harmon kardon 930 twin marantz hd 770 polk. technics sl 1100a
    • Replies: 56
    • Forum: Introductions
  24. R

    Denon 2105 in Protection mode. Wanna help a rookie?

    Hi. Just seeing if anyone is interested in helping a rookie learn a bit. I have a Denon AVR 2105. Given to me so I have nothing invested in it, just want to use it to learn. Guys son was cranking some tunes one night and it shut off. It goes into protection mode seconds after turning on. 1. I...
  25. PE9ZZ

    Denon PMA-700V Output Protection?

    This is a modded Denon PMA-700V with a digital input. I had loaned it to my neighbor but to my chagrin it came back with blown output transistors (2SA1962/C5242). This was probably caused by a dry joint at the collector of TR505 but I am not sure. To prevent this from happening again I wanted to...
    • PE9ZZ
    • Thread
    • current limiter denon pma-700 protection
    • Replies: 7
    • Forum: Solid State
Back
Top Bottom