• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

display

  1. Kelly62

    Pioneer VSX 4400 Display went dark

    So as I was sitting back listening to my Pioneer VSX 4400 The display faded to black, came back on and faded to black again and remains black. The audio was not interrupted. Just curious if anybody has had the same issue and how you resolved it? Caps, fuse, failing solder connection? I do not...
  2. FireGuruMN

    The difference between hoarding and collecting is nice shelves.

    Here are a couple of pictures of some of my collection. Yes, yes, I know what all or you are asking "How did he build those nice shelves"?:rflmao: Well let me tell you. . . Figure out what size shelves you need to hold your equipment and what space you have in your house (garage, trailer...
  3. R

    Pioneer SX-D7000 Tuner problems

    I got a D7000 from the internet, all seems to work well except the tuner. all memory lights are on. Display light up except the frequency digits not (FM/AM) I'm lost, Does anyone have tips to help me?? a million thanks in advanced!!
  4. pioneer07

    JVC RX-401 display has gone dark

    I got this old JVC RX-401 for $25 recently and everything was working perfectly until the other day when the entire LCD display went dark. I am looking for advice on troubleshooting and fixing this issue. Seems like it is probably something basic since the entire thing went dark. The sound is...
    • pioneer07
    • Thread
    • display jvc receiver
    • Replies: 52
    • Forum: DIY
  5. F

    Magnavox cd player display not working

    Hello, I recently got a Magnavox cd2000-bk22 cd player for cheap, and everything on it works fine except for the display. Whenever I use the player, only the 'track' light comes on. I've taken it apart and examined everything I can access but I can not find any glaring issues. I also can't find...
    • Force5
    • Thread
    • cd player display display not working help magnavov not working
    • Replies: 3
    • Forum: Digital Sources
  6. C

    Marantz CD6006 display

    I just purchased a used Marantz CD6006. When I got it home, the display is off. does anyone know how to get the display to turn back on? I’ve scoured the net and forums and don’t see an answer
  7. PE9ZZ

    Philips 22AH180 Repair/modding

    I made a little writeup about my adventures with a Philips 22AH180 "Black Tulip" TOTL tuner here. Enjoy!
    • PE9ZZ
    • Thread
    • 22ah180 black tulip display modification
    • Replies: 5
    • Forum: Tuners
  8. Froznsaga

    JVC TD-V621 Display

    The display on my awesome 3-head JVC cassette deck is really weak. It's a hair stronger on the left side than it is on the right, but it could all be brighter. Do I replace the display capacitor to repair this?
    • Froznsaga
    • Thread
    • display jvc td-v621
    • Replies: 1
    • Forum: Tape
  9. 1mike161

    Correcting Display Instability and Speed Issues: DT Timers

    The following instructions describe how to solve display instability (mode flicker) and clock speed accuracy problems that can occur with Pioneer DT series timers. These problems are due to failing internal resistors of the MN6076 clock chip. The solution is to add four 10K Ohm 1/8 Watt...
  10. ExcitableOne

    JVC R-X400 no output and LCD doing some weird things

    So I bought an untested JVC R-X400 on eBay kind of knowing this would happen. As of right now I'm getting no output, one of the fuse lamps is burnt out, but I know how to replace that. The spectrum analyzer is peaking at all but one frequency, and the display at that part I'm assuming displays...
  11. B

    Optonica SA-1507 display problem

    The receiver works normally except for a display problem. The first two digits are ok, but the last two have all segments illuminated all the time, with the ones that should be lit being only slightly brighter than the other ones. I took it apart hoping for a loose connector or something, but no...
  12. lini

    Question to other PCM-M10 owners

    First of all, let me mention that I didn't know where else to post that question, as neither "Digital Sources" nor "Tape" seemed to fit - so I deemed "General Audio" most appropriate... Anyway, I regularly connect my PCM-M10s to the included wall-wart power supply every one to three months for...
Back
Top Bottom