• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

infinity

  1. Are Gjerde

    Genesis servo 12 to Infinity Renaissance 90

    Hi I am the proud owner of a pair Infinity Renaissance 90 which i love. But I used to pen IRS Epsilon. I regret the downgrade especially due to the difference in bass. To compliment my rens, I’ve just bought a subwoofer called Genesis servo 12 and I’m waiting for it to arrive in the post. I’ve...
  2. lattiboy

    Tips for Renaissance 80s needed

    Hi all, In an absurd turn of luck I acquired a pair of Infiniry Renaissance 80s this morning! I have been extremely happy with my NHT Classic Threes, and felt no need to upgraded, but you don’t pass up an opportunity for a pair of rare Infinities if you know what’s good for you! At any rate...
  3. Jumanjii1

    Infinity Infinitesimal 0.1 Crossover Re-Capping

    Hi everybody, What's the story on re-capping crossovers on these speakers? Has anyone done it and where did you get the parts? I'm having a hard time locating these 1200 and 700uF 50 volt capacitors. I guess they're non polarized and that's what the schematic reads. One speaker has very little...
    • Jumanjii1
    • Thread
    • crossover infinitesimal 0.1 infinity re-capping
    • Replies: 18
    • Forum: Speakers
  4. klangtausch

    Infinity Renaissance 90 with Sansui AU-9500

    Hello everybody, this is my first post in this forum, I am based in Berlin, Germany. I am not an expert, but I love hi-fi and good music. I just purchase a pair of Ren 90's (black) in beautiful condition. So happy about them. :) Now I have them connected to a Sansui AU-9500 amp and ...it...
  5. seifreit

    My Kappa 9 restoration

    Part 1 - The beginning As the title states, this is a documentation of my Kappa 9 restoration journey. A little background first. I acquired them from the original owner just over two years ago. They were the first vintage Infinitys I had purchased, in fact at that time, Infinity wasn't really...
  6. Mike Massa

    How to protect my Infinity Primus 250 tweeters...

    I have acquired a pristine set of Infinity Primus 250 loudspeakers, that are basically a two-way setup. I've read that a common problem with the tweeters is that they can blow quite easily. I want to protect these tweeters and would like anyone's input on a possible resistive L-pad...
  7. seifreit

    Sunfire amp and Kappa 9 or Kappa 8s - opinions

    Quick question. I have an opportunity to pick up a Sunfire S300 amp this weekend. Anyone run one of these with Kappa 9s as the sole amp or in combination as a bi-amp setup. How about with Kappa 8s?
  8. F

    Help with Infinity ouverture 3 set up with onkyo 7.2

    Does anybody can tell me what kind of speaker I can add on the back with my infinity ouverture 3 front speakers ? Thank you
  9. Pnstafford

    Infinity column II

    Looking for opinions on column II's. Have an opportunity to pick some up in good shape for $200.
  10. M

    Do I Rebulid Infinity Qb's?

    Hello All, Need some advice; I found a pair of Infinity Qb's at the curb-side store...initial look is they're in pretty good shape, then I tested them with mixed results. I took them apart and discovered they've been WAY overdriven to the point that the plastic controls plate melted inside from...
    • mohare134
    • Thread
    • emit infinity marantz nad
    • Replies: 11
    • Forum: Speakers
  11. jefferylhenr

    Size of enclosure behind midrange drivers infinity rsb speaker cabinets?

    I am building a new set of cabinets using all the drivers, crossovers etc from a set of vintage infinity RSb speakers. Does anyone know the volume of the enclosure behind the midrange driver? I am starting with scratch and don't have an actual example to work from. Also, since everything will be...
  12. N

    Intermezzo 2.6 without power on one?

    Hi all, Issue is as the title suggests. One of these works great, but the other doesn't even power. I've checked the obvious, making sure fuses are good and testing whether power is hitting all the boards and it seems ok. Audio passes to the tweet (which appears to bypass the amp) but nothing...
  13. 747_1133223218

    747_1133223218

    • kjello
    • Media item
    • diole emim emit infinity tower
    • Comments: 1
    • Category: DIY
  14. Shrugg

    Los Angeles, CA, John Ulrich’s Infinity Renaissance 90 -$1500

    https://losangeles.craigslist.org/sfv/ele/d/granada-hills-infinity-renaissance-90/7044342392.html According to the seller they were the first pair of Renaissance 90s ever made, and were custom made for John Ulrich, one of the founders of infinity, with a book matched oak finish. Fairy...
  15. SuperKris

    Modulus woofers blown: Looking for replacement or repair

    Hi, A horrible error while switching sources caused the 5,5" woofers from my modulus to blow. These are the 902-4095 woofers by IMG. I really need my modulus set to be restored because i really do not want to switch speakers. So far i have not been able to source 2 woofers or a new set of the...
  16. B

    Infinity RS6b speakers + NAD 3150?

    Hi there, My current amp is an NAD 3150. I have the opportunity to pick up a pair of Infinity RS6bs for $200 and I'm wondering whether the NAD has enough juice to power the Infinity's? From what I've read, the latter need a fair amount of oomph to really shine. For reference, my current...
    • bulletinwbw
    • Thread
    • infinity kenwood ka 7100 nad 3150 rs6b
    • Replies: 3
    • Forum: Speakers
  17. jefferylhenr

    Capacitor values infinity rs2000 crossover

    Does anyone know the capacitor values for the the infinity rs2000? They are not listed in the schematic. There are two, one you can see on a visual examination - 5 uf and a smaller (ceramic?) feeding the poly cell tweeter which I cannot identify. I am end to end restoring a matched set and the...
  18. eldus

    Technics SL-23 Cart reccomendations ADC K8 cart on hand.

    Hello, I am a noob when it comes to vinyl. I have cleaned up the pots with deoxit and replaced the oil/grease on the spindle. The cart and headshell that came with it is from an ION USB turntable. GT something. After balancing the tone arm and using a printed protractor to confirm its alignment...
    • eldus
    • Thread
    • adc adc blue adc k8 cartridge help help infinity technics technics sl-23 vinyl
    • Replies: 7
    • Forum: Turntables
  19. seifreit

    NPEs for cross-over recap

    I just picked up set of Kappa 8s and I am going to do a partial re-cap, replacing all the NPEs. I've used Mundorf E-caps when I re-capped my RSIIIbs, RS5bs and Kappa 6s. Very happy with the results but here is my dilemma. I need much larger NPEs for the woofer section of the Kappa 8s and I can...
  20. Amplifierz

    New score, Infinity Quantum 4 :)

    I just acquired these gorgeous Quantums. One thing that i noticed right away is that they have the later 'Polycone' woofers. I checked immediately that they were Watkins and not a standard 12 inch woofer. Fortunately the first was the case, they are Watkins 902-1180 woofers. They sound real...
  21. ChefE

    Qe EMIT vs other "EMIT" tweeter?

    Photo 1 "EMIT" tweeter. Photo 2 non "EMIT" tweeter Notice the subtle differences above and below? I have two Infinity Qe speakers. Each was acquired as a single speaker from different thrift stores. It took about 8 months till I got the second speaker. They look similar, but there's...
  22. Fleime

    Emit-r damaged?

    Hello, Although the following has nothing to do with the post title, just to be polite, I will give a short introduction. I am, obviously, new here but I have been reading posts from this forum for some time now. I am from The Netherlands and have been caught with the Infinity virus, though to...
  23. HiFiAaron

    Infinity Qe Bargain. Gotta LOVE the Emits!

    I just picked up an old pair of Infinity Qe speakers last night for basically nothing. I was not looking nor do I need more speakers...but I found these at such a low price I couldn't help but go look at them. I had to laugh at the poor little kenwood receiver the guy used to attempt to power...
  24. scavenger

    Help! rs6b wiring idiocy!

    Hello All! I lurk here daily. It's a great place. I'm new to this, and I pulled the crossovers out of my rs6b's for recapping (had someone else do it). Got them back. Ready to re-install. Then I realized that I didn't mark the wiring connections or take pictures or anything. D'oh! So...
  25. E

    Infinity Kappa 5.1 series ii repair

    Hi all, longtime lurker first time poster. I have been looking for an inexpensive speaker restoration project to get my feet wet in some of the basics of speaker maintenance (refoaming and recapping) before I attempt to do it on my Dad's old AR4xas. Finally I found something that appeared to...
Back
Top Bottom