• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

phono input

  1. pup.biz

    Sansui AU-7500 Phono Woes – sounds like a wool blanket over the speakers!

    [EDIT: It is a Sansui AU-7500, not -6500 ... d'oh!] Hello everyone, I'm hitting my head against the wall here with my AU-6500. Would love some help or advice. I bought the amp a few years ago and had it given a once-over (bias, recapped out-of-spec caps, cleaned) by a friend who did a good...
  2. Testacorsa

    Happy new owner of a HK430 with - with a weak phono input (please help).

    Hi all, I'm new here, so hello and happy new year from Denmark :) I hope you can help me with a weak phono input problem, but first let me tell you about my new receiver. A couple of days before christmas I got lucky, and picked up an early present from my local recycling centre, a Harman...
    • Testacorsa
    • Thread
    • distorted channel harman kardon 430 hk 430 phono input weak input
    • Replies: 13
    • Forum: Solid State
  3. soundguy9

    marantz 2220B Phono

    Hello All, I wanted to share this with you for your advice. I have had a marantz 2220B for 6 months and just loving it. I planned to recap the power supply board for its reliability but didn't have anything as good sounding to take it offline. I finally pulled it off the system and recapped the...
  4. A

    A bit in over my head - Need help building a 2.1 setup

    I have an H/K 330B receiver and a turntable (does not have a preamp). Because of this I plan to be using the phono input which to my understanding will utilize the receiver’s preamp. I plan to get tower speakers and a subwoofer but because there’s no subwoofer output I’m not sure what my...
    • audio noob58
    • Thread
    • 2.1 system active subwoofer harman kardon harman kardon 330b help needed passive subwoofer phono input pre out
    • Replies: 18
    • Forum: General Audio Discussion
  5. J

    Sx750 screwed up

    Hi guys, I came here looking for help. I am attempting to recap my sx750 with very little experience. I redid the awk-065 boards and now my phono input does not work and has a loud static noise when I adjust the volume. So I noticed that I accidentally put a 1845 in The q4 location after I had...
  6. reverend13

    HH Scott 299D - Power But No Audio

    My apologies in advance as I'm a novice at this yet would love to learn, so I appreciate any feedback :) I have an early-model 299D that powers up and tubes light up, but no sound is coming out of any inputs (also checked cables and speaker connections). I'd appreciate any troubleshooting...
    • reverend13
    • Thread
    • hh scott 299d no audio no sound phono phono input scott 299d
    • Replies: 113
    • Forum: Tube Audio
  7. tlite

    Marantz 2235 Phono Input Weirdness

    Howdy. I have a Marantz 6350 turntable plugged into this passive RCA switch like this: I have the turntable going IN to the OUT, and want to switch between two receivers for the output. I have an Onkyo TX-NR808 hooked up to "input" #1, and the Marantz 2235 hooked up to #2. Both receivers...
    • tlite
    • Thread
    • 2235 6350 phono input phono output receiver noise turntable switch
    • Replies: 13
    • Forum: Marantz Audio
  8. forceof1

    Preamp Issues/Recommendations

    System consists of........Marantz 250, Klipsch Quartet spkrs, Pioneer PL550, Pioneer PL-L1000 (which has developed a mind of it's own and is hopefully being fixed) and an old Sansui table with it's own Rolls preamp. .Then theres my Nikko Beta 50 preamp. Nikko. None of the table's produce...
  9. redondo2018

    Sony STR-6036A phono channels go in and out

    I have a Sony STR-6036a that I've had a for a few years now, and after having sprayed the pots numerous times, I can't seem to get the phono input to consistently play from both channels. All the other inputs / radio doesn't seem to have a problem. Switching the power switch on/off while the...
  10. F

    Yamaha C-1 and Denon DL-103R

    C-1 Manual indicates a sensitivity of 2~8 mV "switched" on phono inputs 1-3. This MC cart is rated at 0.25 mV. Seeking input about an appropriate step-up transformer, if required. Apologies if this belongs to the phono forum.
    • FWWJr
    • Thread
    • c-1 preamp phono cartridge phono input
    • Replies: 11
    • Forum: Yamaha
  11. AZstone

    Problems with SX 950 phono input

    Hello - I've been lurking for quite some time, and I've enjoyed reading through all of the posts specifically in the Pioneer forum. I've been waiting for my chance to get my hands on one of these beauties and I finally did. SX 950 in impeccable condition, all original parts and cosmetically...
  12. buckeye56

    Stereo receiver, Onkyo

    I needed a replacement for my 1982 Technics receiver, as one of the speaker plugs is dead and no sound emits from any speaker plugged into it. I ordered an Onkyo 8220 and it arrived yesterday. Sooooo disappointed. It's gigantic and takes up too much space. Haven't even bothered to set it up...
  13. Sam08861

    Setting Phono input on EQ

    Sooo, I got an equalizer to successfully help correct some issues with my room that I'd previously addressed to some degree with curtains and furniture/speaker placement. (22' ceilings, wood floors, open wall, lots of windows, large prints behind glass, glass front TV, and open to upstairs...
  14. abigavocado

    Budget preamp/receiver advice

    Hi folks! So I'm in the market for a preamp or a receiver for my turntable, and could use a bit of advice since I'm still relatively new to this whole turntable life. Currently I have a Kenwood KD-3070 turntable, a Sony receiver with no phono input and a pair of Sony bookshelf speakers. I'm...
    • abigavocado
    • Thread
    • phono input preamp receiver turntabe and speakers
    • Replies: 2
    • Forum: Turntables
  15. cleverdick

    CR-800 Ph-oh-no!

    In my quest to cure a noisy RIAA stage, I did discover a fractured joint at D401 on the so-called EQ Sheet. (PITA to get to, mind!) Now, in this case, somebody before me had fitted a 330R, 5W resistor in the supply line - non-original and not shown on the schematic. Off-load the supply does...
    • cleverdick
    • Thread
    • cr-800 phono phono input
    • Replies: 4
    • Forum: Yamaha
  16. reverend13

    HH Scott 299 Phono Channel Left Side Intermittent

    Hi all -- I have a Scott 299 that has been having problems with the left side intermittently going quiet but coming back on. Only occurs on the Phono channel, as I do not have this issue on the Tape channel. No crackles or static when this happens. Connection with the speakers are good...
  17. John Parkey

    dumb question about phono input

    Holiday greetings everyone. I have several integrated amps from the late 70's and would like to hook up a CD player, a Tuner, and an external DAC for streaming. All of my integrated amps have AUX, Tuner, and Phono as inputs. Would it be harmful to the integrated amp to hook up the CD or DAC...
  18. Ishq

    Onkyo TX-37 - Fix or buy new?

    Greetings, New to AK. Tell me what to buy or do I fix vintage Onkyo TX-37. I'm the original owner of the Onkyo TX-37. Bought it in high school with money from my first job. I've used her ever since as my only receiver. She still works but channels cut in and out and crackle (mostly right...
    • Ishq
    • Thread
    • fix hd hd radio onkyo phono phono input
    • Replies: 7
    • Forum: Solid State
  19. B

    NAD 7020 receiver inputs/switch/DAC question

    Hi all - I have some older audio equipment my dad gave me - a NAD 7020 receiver and ADS L520 speakers. I am trying to set them up with a CD player but also with my computer/TV. The receiver only has one set of RCA AUX input jacks so I am looking for some type of switch that has 2-3 inputs...
  20. ChefE

    Advice needed regarding phono inputs and a mixer for home use

    Hi. This post is regarding home audio use only. Not professional. I have a few turntables (2x Technics SL-1200mk2, SL-5300, SL-J33) and a Pioneer DJM-300-S deejay mixer/ phono preamp. I connect the mixer to a vintage stereo receiver with phono inputs via RCA cables. Even tho the mixer is a...
    • ChefE
    • Thread
    • connections dj mixer phono input pioneer djm-300-s rca cables turntable vintage audio
    • Replies: 4
    • Forum: Turntables
Back
Top Bottom