Hi, I picked up a Sansui 9090db for really cheap. A lady bought a house with everything left in it, so she wanted to sell everything. So I ended up buying this beast.It powers up and the circuit protector light turns green. It does produce audio, but it is heavily distorted. So far all I've done...
Hello Everybody,
I just received a Sansui 990DB (my company was about to trash it) along with a Sansui SR-626.
The problem I have now is that there is absolutly no output whatsover. In addition the tuner also does not pick up any Signal (or at least the meter wont show it).
It will go out of...
Hello,
Doing a restoration on the Sansui 9090db.
I did a full recap, changed most transistors, resistors, diodes and fixed all threw holes on the dolby board. Naturally also all pots/switches taken care of.
Now without the driver board using a dbt is dim the relay works and get the green...
If you have been around the Sansui Forum for any length of time you know that the 9090DB and it's variants, the 8080DB, 990DB and 890DB are the topics in many threads. They are arguably the most popular and most widely produced of all Sansui Receivers. The earliest serial number we have on...
Hi guys. I'm about to begin with the restoration of my uncle's old Sansui 9090DB. The receiver is in a pretty bad condition, it has been serviced by bad technicians and they replaced parts with cheaper or wrong ones.
Issues:
. Burnt resistors
. Blown fuses
. Blown outputs
. Scratchy pots
A...
This is the 2nd Sansui 9090db I have had on the bench in the last 6 months, as well as a complete rebuild of a G-9700 in between. This 9090db is very strange. After complete cleaning and deox i powered it up on Variac and was thrilled to see it come out of protection mode right away! I have...
Hello all,
I have a Kenwood KD-500 with Grace G-707 arm and Sonus "Blue" cartridge and stylus. I am runnint ith through the phono input on a Sansui 9090db and out to Polk Monitor 10a speakers.
The problem that I am having is that I can not seem to get any good sound out of my TT. Initially...
I've got a Sansui 9090DB that all the inputs are quiet except tape 2. Tape 2 sounds great. Is this still a Dolby board issue?
What I've done: de-oxed switches multiple times and connections in back, audio is better every time but only in tape 2. Dolby board pass-throughs reflowed with...
Hello Friends:
I presently own a Sansui 9090DB 125 watts into 8 Ohm receiver. I currently have a set of Cerwin-Vega DX-9's hooked up to it and they are rated at 4 Ohms. Been good so far. I plan on building a set of JBL C34 speaker cabinets with JBL D-130 woofers, LE175 Potato Masher horns and...
Hello everyone.
I'm working on Sansui 8080db. Originally, it was (you've guessed it) stuck in protection mode. Resistor replacement on the driver board and all 4 outputs took care of that. Next problem found once out of protection was no Left channel. Sound was there just barely. Found it to be...
Let me set this post up right to begin with. I have owned this 8080DB since new. After letting it sit idle for many years because of driver board failure, I took it out to reclaim it's glory. The driver board was completely gone through along with re-capping the power supply board and 4 new...
Just garbage picked a 9090db. I brought it home and got the red protection light. This was in someone garage for years and it's dusty as hell. Read a few forum posts here, replaced the no. 34 and 35 1.5k ohm resistors on the power board and she came back to life. I am very excited. I now...
Here is my black faced Sansui 990DB I picked up at the thrift store a few days ago for $25. Probably going to find its home in the computer room by the time you view the pic.