• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

caps

  1. Keith Baran

    1060 Output coupling caps

    Starting a 1060 revival, more like a resurrection ( it's nasty) LOL . Making a parts list for Mouser. Everything was fine until I got to the output coupling caps, the stock caps are Elna 3000uf 55v. I search Elna,Nichicon, Panasonic and no 3000 uf caps, only 2700 and 3300 uf. Is it OK to use...
  2. Sonofnothing

    ...Before I start smashing these with a hammer!

    Please somebody help out a noob. I'm trying to re-install the drivers in my KLH model 6. I don't understand the wiring diagram! Disclaimer: These are NOT the model 17, 20, 23, etc etc. These are the late* model 6. please don't post photos of the sloppy messes inside of those 17s (that I've...
    • Sonofnothing
    • Thread
    • caps klh model 6 six tweeter wiring woofer
    • Replies: 28
    • Forum: Speakers
  3. U

    Original large Advent loudspeaker - high frequency switch not working

    Hi, I recently bought a pair of Advent loudspeakers, circa 1975. They sound good, but the high frequency switch at the back of the speaker seems to make little or to my ears no difference when switched between its three settings. The caps (revision 2 crossover, 16uf and 8uf) seem to be the...
    • UtterAudio
    • Thread
    • advent capacitors caps crossover large advents
    • Replies: 2
    • Forum: Speakers
  4. copezone

    MARANTZ 19 (channel issue)

    Ok, so a guy brought a 19 into my shop with the left channel out. Two prior service attempts by others (new caps, yadda, yadda,) and still, no left channel, EXCEPT during "power down". While powering down the left channel kicks in. ANY IDEAS???
  5. Joey Abs

    Recapping Question (2225)

    Starting the process of recapping my 2225 and was wondering if there was a suggested brand of cap to replace the existing ones with? Most caps I have looked at are Elna brand which are available but I also noticed the cheapest on the website I looked at. Fearing you get what you pay for I'm...
  6. rpeter46

    Marantz 2330B resurrection thread

    My co-worker recently mentioned that he had some 'old' marantz gear lingering in his garage. He wanted to know if I was interested in buying. I told him "YES!" Bring it in, and we'll probably get a deal worked out. It was too heavy for him to lift, so I went to his house and brought home a...
  7. Richs_Trains

    Model 18 fire!

    Hey all. I was trying to re-cap my Model 18 that was just repaired and working fine. Well I got through most of it without an issue until the last section I did. I replace C-20, C-21 and C-22, unfortunately I installed one of these backwards. My question, I dbt'd the unit it passed fine, I...
  8. VanTryumf

    Has my second hand receiver seen service?

    I recently purchased a sansui 881. The seller powered the unit up and went through all the functions no major issues, the seller said he bought it from a website and is not sure if ithad been recapped or serviced. My question is there some way of determining if the receiver has been...
    • VanTryumf
    • Thread
    • caps sansui second hand
    • Replies: 19
    • Forum: DIY
  9. writesds

    Onkyo tx-2500 Missing? Caps

    I picked up a non-working Onkyo for $20 today because of the clean condition, even though no output. Turned out to be blown output fuses and seems to have no issues. I cleaned it up, gave it deoxit and it it is very nice as the photo shows. I went to inspect the boards and for some reason C918...
  10. Richs_Trains

    2218 Cap Question

    Hey All, Re-capping a 2218 and have everything except the 6800uf 35v large caps, I do have 10,000uf 35v leaded caps. This unit doesn't appear to have an independent filter cap and it looks as if the amp and power supply share the same wafer board. Are these 6800uf 35v a form of filter cap...
  11. Richs_Trains

    Filter Caps

    Ok, I know it is a dumb question, but that's why I am here, hopefully to learn. When I look at the values for filter caps from the suppliers, they offer several different terminations, i.e. 'snap in' , 'screw terminal', etc. What should I be ordering for the best connection? Thank you Rich
  12. jmosher

    Marantz 2220B 'LOUD' popping noise!

    After about 20 minutes of use I got a LOUD popping noise. It sounds like if you were to drop a needle onto a record very violently and the volume is set to 11. I had to run over and shut it down. To be fair, it has NOT been restored but I cleaned the pots pretty good. Not sure what this could...
    • jmosher
    • Thread
    • caps marantz marantz 220b popping noise power recap restore
    • Replies: 3
    • Forum: Marantz Audio
  13. SX-1010 Caps

    SX-1010 Caps

    • gyusher
    • Media item
    • 000uf 22 caps
    • Comments: 0
    • Category: Member Galleries
Back
Top Bottom