• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

dayton audio

  1. R

    Custom 800w sub driver recommendation?

    So I've recently come into possession of an amplifier back plate from a Martin Logan Dynamo 800x and I think it would be a fun project to build my own subwoofer with it. However I'm relatively new to diy speakers and I'd love some recommendations for some woofers to drive with it. I've heard a...
  2. J

    Budget amplifier(s) for multi-zone setup?

    Hi all! I'm an audio novice and new to this forum. I'm hoping to retrieve your support in which amplifier I should get for my budget multizone project as I'm currently going back and forth on this matter... I'm currently renovating my house and have invested in both Lithe Audio and Micca...
  3. grey_beard

    Dayton Audio HTA100BT Initial Impressions

    I decided to see how this budget hybrid amp performs on my desktop system in front of a pair of ADS L300s. The amp is listed at 50 wpc into 4 ohms which seems about right. The tube preamp is class AB so I figured for $165 (restock from Parts Express) I would take a flyer. Previously I was...
  4. Standalone

    EV HR9040 Horns - New Speaker Day

    I'm pretty excited about today's haul. I have some big Bag End S15B-D's that I've refinished and thought about using for a large, sensitive 2 channel 2-way setup. These came up locally, with W bins and a pair of reconed JBL 15"s and a pair of EV 15"s. The seller included some Dayton audio...
  5. H

    EXTERNAL AMP FOR KLIPSCH RT-10D SUBWOOFER

    Greetings, My beloved RT-10D subwoofer amp died. Can I simple rewire the active driver to accept a signal from an external amp, like the Dayton Audio SA1000, or similar? Any help will be greatly appreciated.... Cheers, Hank
  6. J

    BOSE 601 Series ii crossover (only one Resistor and Capacitor in Xover )

    hello Bose enthusiasts, Anyone who rebuilt the Xover could indicate if this makes sense to them ? Perhaps the Xover were modified, i have no way to know but am strating to suspect they might have been. But maybe not, might be a leaner version of the network. Eager to hear from anyone who has...
  7. thornton102

    Has anyone built anything with the new Dayton Audio or SB Acoustics coaxials?

    I ran across the Dayton Audio and SB Acoustics coaxial drivers, just the thing I'm looking for in a center channel or soundbar! Has anyone built anything with these? And does anyone happen to know if there's going to be a Dayton Audio CX165?
  8. Cody AOC

    How should I ported this Dayton Audio enclosure?

    Greetings all I want to port the Denovo Audio Knock-Down MDF 4.0 cu. ft. Subwoofer Cabinet with Blank Baffle, and I seen people saying they were porting it with Aero Ports and I thought that it would be a easy way to port this sealed enclosure well I want to tune it between 28-30 hz. I wanted to...
  9. Cody AOC

    How would I use my 2 Crown amplifiers together?

    Hi so I been trying to figure out how would I connect my 2 crown amplifiers plus my subwoofer amplifier which is from Dayton Audio it is the Dayton Audio SA1000 Subwoofer Amplifier Rack Mountable? And so it would be getting connected to my computer which yes it does have a sound card that I...
  10. C

    Dayton Audio DA30 vs TPA3116 2.1

    Hi, i'm look for the best portable amp for travelling, i've found these two which do you think is better? Or another choice? ebay link tpa3116 2.1 vs Dayton Audio DA30 I'll be using a laptop, soundblaster audio card, 1 energy speaker and 1 orb speaker.
  11. Cody AOC

    What kind of use is this Dayton Audio subwoofer for?

    So i have been really interested in getting this subwoofer, Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil, and i wanted to use it in my home with my audio system i'm a bass lover but is it made for home use or car use? I see some peple using them as home subwoofers and some...
  12. Sterben

    Help with Crossover

    I am building a speaker, preferably using dayton audio's reference series 1 1/8" tweeter and 8" woofer wired in parrellel. However, both speakers are 4 ohms and I need help figuring out how to make a 2nd order crossover that will bring the ohm load up to at least 6 ohms, without significantly...
  13. camerakid

    Are the Dayton Audio RS75T's a good deal?

    I was thinking of buying four Dayton Audio RS75T's and a pair of Denovo Audio 0.04 cu. Ft. Speaker boxes with my Christmas money for a DIY pair of speakers, so me and my dad can build them together (a little father-son project never hurts). And I bet your wondering why I need four of them...
Back
Top Bottom