A neighbor gave me an electro voice 1182 a few years back. Right channel works, however left channel is very faint. I’ve identified the problem as a damaged, leaking 50mfd cap in the power amplifier board. This brings me down to the question, is mfd the same as uF? If not, please let me know the...
Thinking of overhauling my old EV S12 cabinets to hot rod them for EDM shows I'm throwing. I found this forum and a similar thread on some even older EV cabinets so I figured I should make a post and get some advice before I pull the trigger. I have a local sound shop I'm going to consult for...
I just picked up a EV Regeneracy III speaker yesterday and today I hooked it up to a newly recapped Realistic STA-2600 in mono, after a couple hours of listening I really don't like how it sounds.
I've tried moving it around, putting speakers next to the vents on the side for more bass /...
I have a question for our esteemed EV historians. I’ve been looking at T25a’s lately and noticed some differences in the labeling. Can you tell me if the differences in labels give some clue to the production date of the driver? See attached photos?
Good morning and Happy New Year!
I have two main stereo systems in my house. The large one in the living room consists of EV S15-3’s that are mint with rebuilt x-overs, and the smaller bedroom system has JBL 4406’s.
I just recently purchased a never-used-in-box Hitachi HA-2 amplifier to push...
Hi all! I am restoring a pair of Electro-Voice Interface A: Series II and curious if anyone has the crossover schematic available. I am also curious if anyone has worked on these and has suggestions as to alternative crossover components that may no longer be available or possible upgrades...
Hello to the fine folks of the forum. Huge fan, have been for a while. (Especially the Speaker area) I come to you with my first mystery. Picked these Electro-voice soeajers up at a local thrift shop for a few bucks. I can't seem to find a whole bunch online regarding this model. I have...
Hi Everyone,
I've been looking for some high sensitity vintage speakers to use with a ASL Wave 8 for a while now and after a couple of attempt, I finally found a set. As noted in the title they Electro Voice Marquis speakers manufactured in the ealy sixties. The cabinets are in wonderful...
I have 4 vintage Electro Voice LR4SAT column speakers (line array type) and need help to hook these up correctly.
These speakers have a voltage selector for 25, 70.7 and 100 volts line. I have a crown D-75 power amplifier that I planned to use with these speakers.
Hope someone can tell me...
Does anyone know of a good and inexpensive source to find adapters such as this? I am hoping to try out this EV Slimair Model 636, but I don't want to pay an arm and a leg just to do so. I found it a flea market for five bucks. It looks perfect, but it would silly to pay big bucks simply to test...
Picked these up this week. In beautiful condition. From 1959 - 1960
5 Drivers in each - 2 Bass Drivers, 2 Mid Range and 2 Tweeters all working all original.
Bass Drivers are Jensen P12R. Midrange and Tweeters are Quam Nichols
I also picked up a pair of Electro-Voice EV-6B's. Cabinets are also...
First off, I want to thank anyone who takes the time to help me with repairing my T-35 horns. I recently purchased a pair of vintage EV regency speakers. The speakers have some issues that I am trying to take care of. One problem is that a diaphragm on one T-35 was bad. I purchased a...
okay, so ive been reading the manual for these speakers, and its not very clear on how to hook them up with the EQ to anything else but a reel to reel. theres also not a lot of these bad boys out there, some advice and guidance would be greatly appreciated.
for a turntable setup i am assuming...
My dad has a set of old Electrovoice speakers that he loves, and I would like to bring them back up to spec. Personally, I think that the mid and high horns are a little tinny sounding. I've deoxited the 'Brilliance' and 'Presence' (high and mid) controls, but am assuming that I will have to do...
Trying to understand the value of these. The cabs are in near mint condition, as are the speakers. I already posted another thread about these and folks feel the enclosures were sold separately and they were designed to carry whatever speakers you wanted. You can see there's a black plywood...
Trying to understand the value of these. The cabs are in near mint condition, as are the speakers. I already posted another thread about these and folks feel the enclosures were sold separately and they were designed to carry whatever speakers you wanted. You can see there's a black plywood...