• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

recap

  1. dlucy

    Recapping a Tandberg TR-2080

    A friend asked me to recap his Tandberg and it is quite a different build than the Pioneers, Harman Kardons, and Kenwoods I'm used to. This TR-2080 is supposedly the TOTL receiver from the Norwegian Tandberg. The receiver has pre-outs and main-ins, so it is easy to identify the constant...
  2. Mitchellk

    Pioneer Sx-850 amplifier board issues

    Hello, I am having an issue with a Pioneer sx-850. R38 and Q6 on the power amplifier assembly is running very hot. So hot you can't touch either within a couple of seconds of turning on the power to the unit. The radio was playing fine when I smelled smoke and found that VR3 had a burn spot on...
  3. RR--

    New project. Sansui 8080 recap. Advice appreciated.

    Hey guys I'm back! But I never really left as I have literally been using my AU-719 daily since I recapped it around 2013. I came across a Sansui 8080 in rough shape years ago but am only finally starting to use it due to being able to actually fit this monster it in my new house. It sounds...
  4. Leestereo

    Leestereo's Restoration/Upgrade of a Sansui AU-555A

    A very nice Sansui AU-555A was on the workbench for a complete restoration and upgrade. Part 1: Power Supply The stock C001 capacitor (2200µF/63V) was replaced with a 6800µF/80V low ESR type; note that the voltage rating of the replacement was increased to 80V since this capacitor is...
  5. Golanr

    Marantz 2275 Recap & more

    A few weeks ago I completed a recap (and much more) of a Sansui G-9000DB, following an issue with the left Channel. http://audiokarma.org/forums/index.php?threads/g-9000db-distorted-sound-on-left-channel.810653/ I've decided that it's time for a recap of my 2275. I plan on documenting this...
  6. TellMeWhy

    Marantz 5220 Wow and Flutter?

    Hi all,I recently had my Marantz 5220 fully revised by a specialist tapedeck tech. I will copy a list of the work done below. However, after the revision there is still audible flutter, particularly when recording, and particularly on things like acoustic guitars and mandolins. In fact it's...
  7. Scott75s1974

    Scott R75s rebuild questions

    Hi, I’m rebuilding my Grandfather’s Scott R75S from 1974. I’ve had it for about 30 years. Used it intermittently up until about 8 years ago. ***I’ve read a lot of posts but haven’t found any general newbie refurb FAQs. So if I’ve missed that, please direct me there.*** It’s symptoms at last...
  8. Super Noob

    Project: Realistic STA-2000 (Rebuild)

    Here is the most recent patient: This was my 2nd acquisition of vintage gear about 4 years ago. Rat shack 2nd best has been doing service in my daughter room over the last couple of years. It is partnered with pair of HPM 60s (great combo). It sounded good, but I wanted to do some...
  9. Johnny_Law

    Yamaha YP-D6 Pulsing Speed - Rebuilt - Parts List - SOLVED YAAAAYYY

    EDIT NOT QUITE SOLVED: Issue with all three pots & pot adjustments but came back aaaagggghhhh :no: EDIT2: Was the diodes!!! This wasn't holding speed so I cleaned the pots and put in all new electrolytic caps & transistors, and it still won't hold speed. But now, it pulses fairly aggressively...
  10. Golanr

    G-9000DB Distorted sound on left channel (Solved)

    I have this receiver for 6 years now and had no issues with it. Last week the left channel started sounding distorted, even on headphones only, which means this is happening prior to the amplifier side of the house. It starts getting distorted after 10-20 seconds. I did notice that without...
  11. P

    CT-F9191 recap??

    Hey guys, This is my first post here but I’ve been lurking for ages and got a lot of help already, time for a specific question though. I just bought a Pioneer CT-F9191 (actually it’s a CT-9, but I believe they’re the same thing) in an online auction. I called the owner before I bought it and...
  12. E

    About to Replace the Capacitors on a Technics SA-202 Receiver, Questions About the Tuner Stage

    So, after catching the re-cap bug from doing my Onkyo A-7070 (holy crap, what an improvement!), next on the surgery table is my Technics SA-202. The Technics, though, has a tuner section, and that is where my trepidation begins. I have heard conflicting reports that replacing caps in tuner...
  13. dlucy

    Sansui solid state 7000 repair, recap, and restore

    A fellow AK'er has a Sansui 7000 that he'd like to repair and restore, so I said "sure! that'll be fun!" After looking a little into the specs, parts and history of this big 70's receiver I found it is a high power cap-coupled design... so *I* had to buy one, too. So, now I've got two units to...
  14. nickdinatale

    AR2a capacitor oddity

    Yesterday I re-did the crossovers on a mismatched pair of AR2a's. I was a bit puzzled to find that the older speaker (c.1961) had the normal values I've seen elsewhere for 2a's - a 6uf and a 4uf wax covered cap. However, the newer one (probably c.1966) had a capacitor that was marked as having...
  15. HiResDes

    Basic Recap Question

    I was just wondering if you guys might have any tricks as to how you normally go about prying the board from the speaker. I'm having a particularly tough time getting the board out to start the soldering work. I thought about just trying to solder through the subwoofer hole but that seems...
  16. Noel Bilbro

    Restore Marantz 2226B

    I reveived this Marantz 2226B for a good deal. I have decent enough experience soldering to PCB(making keyboards) so I think I could do a recap. I realize no one is going to hold my hand through the entire process but, I am quite lost when it comes to what brands/types to use for what and where...
  17. Noel Bilbro

    Restore Marantz 2226B

    I reveived this Marantz 2226B for a good deal. I have decent enough experience soldering to PCB(making keyboards) so I think I could do a recap. I realize no one is going to hold my hand through the entire process but, I am quite lost when it comes to what brands/types to use for what and where...
  18. PTL-Pioneer

    1060 - Purchased, now restoration

    Hi all I have purchased what i think to be a virgin 1060 - Gonna see what all this fuss is about! Can someone point me in the direction of a new replacement power switch, and multi turn pots for these preferably from mouser? Are there other bits that require attention in these? Resistors etc...
  19. Soun!

    Just got a pair of SP-4500A’s and of coarse need info!

    Any info (manuals, brochures, etc.) would be very much appreciated: I failed to find anything online, unfortunately. Could somebody please tell me what the sensitivity of the 4500’s is? I know they are 8 Ohm nominal, 120W RMS, but that is about all I know. If I am not mistaken, this model was...
  20. D

    Polk Monitor 7C Recap Help

    I'm looking to recap my polk monitor 7c speakers. I know they are a well-regarded vintage speaker but I'm not 100% loving the sound. I tried getting the replacement tweeters (rd0194-1) but they didn't fit in the original driver opening. After some research I found that if they are all...
  21. Mojoworkin

    Wharfedale W60 score! Now what? (vc rub/re-cap)

    Good Morning friends- I wanted to share my good fortune at obtaining these lovely early dome cone tweetered (not the purple pancake) Wharfedale W60's. (Actually a long time ago, but finally getting around to playing with them. Also, I have questions. Hooked them up, and the sound is "meh,"...
  22. G

    Marantz imperial 7G recap

    Hi guys, I was gifted a pair of decent Imperal 7G's, and after refoaming I use them in my main set-up. Most forums tell me recapping the crossovers will improve the sound of these vintage speakers ( to an extent). So when I went to see what kind of caps I'd need, I came upon the following: I...
  23. David Bright

    Recapping my speakers

    Hello, I have KLH Six, KLH 32, and Avid Model 102 and want them recapped. Anyone in the So Cal area that can do this?
  24. O

    recap poll capacitor

    One is before One us after.... Decide Adc 1600DD . .
  25. mattsd

    Pioneer SX-1280 recap and restoration thread

    Here is the 1280 restore thread I promised! Also, here is the current Pioneer SX-1280 recap list I am using right now. Note in this restoration I am using some different parts compared to the list. Function Switch Board (GWS-173) GWS-173: C9: 10uF 16v CEA: 667-EEA-FC1E100 10uF 25v GWS-173...
Back
Top Bottom