• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

refoam

  1. C

    Need help with Ohm C2 speakers please...

    I am trying to refoam woofers on a pair of Ohm C2's. I bought the foams from simply speakers and have done foam surrounds before. My question is, when I look at these, they appear to have had the foam applied to the front of the cone, and i can't tell if the roll of the foam was concave into...
  2. Command8

    Sony ULM Speakers

    Howdy Y'all, I bought a pair of Sony SS-7200 ULM-2 Speakers to replace my not so interesting Klipsch r51m speakers. I think they are a better match perhaps for my Sony ta-1150 amplifier as they are both from the early '70s (the amp currently needs a recap, it loses a channel but I can get it...
  3. C

    NHT Zero (not Absolute Zero) refoam

    I need to refoam/re-surround my "vintage" NHT Zero speakers but I can't seem to find exact kits for them. Are they the same speaker sizes as in the Absolute Zeroes? Here are the measurements: Speaker cone OD: 3-1/4" Surround OD: 4-5/16" Surround ID: 2-7/8" Suggestions for a source, anyone...
  4. VintageDutch

    Looking for idea's on Bose Interaudio Grills restore

    Hey everybody.. This weekend I picked-up two Bose Interaudio Model 3000 Speakers... Mind you... They are the Grandma and Grand daddy of the later 3000XL I my younger years I sold many of these speakers, and now that I'm in the Vintage Audio restoration game I wanted a set since I remember...
  5. 4eyesmusic

    Re-Foaming some DSS-E6’s Question regarding the grills

    Hi all, I recently purchased a set of Pioneer DSS-E6’s that need the woofers re-foamed. I have new foam on the way from Simply Speakers. Has anyone had experience with these speakers? I am curious as to how I will have to tackle getting the grills off. They appear to be sealed to the...
  6. 4eyesmusic

    Speaker re-foam Pioneer DSS-E6

    Hi all, I have been lurking here on audiokarma and really enjoying all the great help and info you all share. I recently purchased a set of Pioneer DSS-E6’s that need the woofers re-foamed. I have new foam on the way from Simply Speakers. Has anyone had experience with these...
  7. Timingfool

    New foam for Fried Beta IV Signature Series

    As stated before, I found 3 sets of Fried Signature Series Speakers I am going to rebuild. I have been pouring over the Internet trying to find suitable foam kits and have basically driven myself crazy. Nothing seems to fit exactly. Since the foam on the cone overlaps the top edge on this...
  8. Ackermann

    Epi M150 - Refoam, or Rerubber

    Have had an old pair of Epi M150s sitting around I’m now getting ready to rebuild. Usual stuff. But, they’re an early version (24746) and have the rubber surrounds. The rubber is shot and needs to go. And I’ll have to strip the gasket. Question: foam, or rubber? And if I go with rubber do I...
  9. JayPare

    Cone hole, can I refoam without replacing it?

    I picked up a pair of Atom V2 for 20$ CAD on monday and I thought it was a steal but after hooking them up I was really disappointed with their sound. I also heard some weird noise coming from them so I decided to open them, and surprise, they need refoam. I've done refoam in the past and for...
  10. J

    Anybody try midwest speaker exchanges foam kits?

    Ordered a kit to refoam my Jensen model 4s before I was able to get in contact with Rick. Anybody had good experiences with the quality of their kits? Or should i try to return and purchase some surrounds from Rick. Did a search and couldn't find any reviews. Thanks, Jack
  11. V

    Any Info on Pioneer Model XD-6?

    Hi there, It's been impossible to find any real info on these speakers aside from an old audiokarma post that didn't really answer the OP's question. I'm asking if anyone can tell me whether or not these are worth trying to refoam. I picked them up for $20 so it's not a real loss to me if not...
  12. S

    Refoaming problem I cannot fathom

    I am refoaming the woofer surrounds on my father-in-law's Boston Acoustics A-60 speakers. I got the kit from Simply Speakers, and the first speaker was a cinch. Sounded just like it did in 1982 when he bought them (on my advice). However, the second speaker went wrong somewhere. I was...
  13. L

    Refoaming kit for Sentry iii woofer

    Hi there! Newbie to this forum This will be my first audio project. There is no one where I live in Maine that repairs hifi equipment. I'm looking to DIY refoam one of a set of speakers (the other was done about 10 years ago but one of them is dry rotted and first sounded blown and now is not...
  14. angelaudio

    Damaged JBL LE120H-1 Woofer cone. Repair or replace?

    Hello fellow Akers I hope you find yourselves well. I recently acquired a pair of JBL L7’s and one of the woofers looks like it got shot...not sure if it was hanging around all those looters and took a rubber bullet in the side :biggrin: Anyway, I’ve attached a picture so you all can see the...
  15. A

    Excessive speaker cone movement: Cerwin-Vega AT-8

    Hey all. Hope you're all gettin on okay given the times. Got a two (or maybe three) part question here. I just got gifted a pair of Cerwin-Vega AT-8 speakers. I've ordered foam to refoam them from SimplySpeakers, as one of them has a rip in the bottom of it, and they both feel/look pretty...
  16. FireGuruMN

    Dahlquist DQ10 Recap and Refoam and Such

    I landed a pair of Dahlquist DQ10 off CL for $250. Supposedly one driver was intermittent. The owner said banging on the side would usually bring it back. Wow like 1970's television. And they have not been serviced (or cleaned) since 1972 that I could tell. But there is a special place in...
  17. S

    Refoaming Paradigm Atom Bookshelf Speakers

    Hi all, Found a pair of these (the original models, I think, not the v2s or later) at a local thrift for $6. Hooked them up, can tell they're very good-sounding speakers -- I have a pair of 5se's I really like -- but one's got either a bad woofer or needs to be refoamed. I suspect the latter...
  18. T

    Testing a KEF 103/4

    So I’m looking to buy a set of used KEF 103/4 speakers. I’ve read a lot about the foam on the bass drivers failing and causing the voice coil to rub and fail, and the ferro fluid drying out in the tweeters. I can handle a basic refoam, and refilling the ferro fluid doesn’t seem too crazy; but...
  19. Gustavsson

    Kef 102.2 Refurbishing - a write-up

    I’m currently in the process of refurbishing a pair of Kef 102.2, and while there seems to be a lot of topics covering the more popular 104.2 for example, I found little information about the 102.2. I have therefore decided to do a write-up about the process. Hopefully it can be of use or...
  20. angelaudio

    Dahlquist DQ-10 5” Driver Recone/Refoam Question

    Hello there fellow AK’ers I recently acquired a pair of DQ-10’s that needed the woofers refoamed, which I subsequently completed with good results. Upon closer inspection I noticed that the 5” drivers with rubber surrounds were also beginning to deteriorate so i removed the rubber surround but...
  21. JayPare

    From KEF Reference Model One to KEF Reference Model 103/4: upgrade or downgrade?

    I currently have a set of KEF Reference Model One and I love them. However, I came accross a pair of Reference Model 103/4 on a local listing website that need internal speaker refoam. The price is accordingly (cheap) so I was wondering if it could be a nice upgrade if I buy then refoam them?
  22. Airjmax

    "Reconed" vs "Refoamed"

    I've seen many posts where someone refers to a speaker being "reconed", even though the discussion is about replacing the foam surrounds, which I thought was termed a "refoam". Are the terms interchangeable? I always thought a "recone" would be replacing the cone and the surround. In fact...
  23. skaterblack

    JBL LX 66 Woofer Repair

    I recently was given a pair of JBL LX 66 floor standing speakers. The woofers needed refoaming, and I did that. Then I tested them. One of the four woofers has a buzz. How should I proceed? I've rotated the speaker 180 degrees in the cabinet with no results.
  24. R

    Speaker repair (refoam) in Washington DC/northern Virginia/Maryland area?

    I'm trying to get a pair of speakers refoamed. I tried doing one pair of speakers in the past and I screwed them up, so I'd rather get it done by a professional. I've used Music Technology in Springfield in the past, but now they're raised their rates beyond what these speakers are worth...
  25. MKG

    Advent 2/w refoam issues

    After being quite impressed by the advent baby IIs after their refoam, I was super excited to get home today and refoam my advent 2/w. Took the screws out and pulled like hell and I can’t get the woofers out. Looks like they were glued in? Was that a stock thing or did someone get to them before...
Back
Top Bottom