Show us your crossovers and guts.

[saabracer23]

Here are some from my reference DIY speaker.




Dan

 

[mkane]

Nice job Dan. Crossovers done right. No unnecessary hardware.

 

[saabracer23]

Nice job Dan. Crossovers done right. No unnecessary hardware.

View attachment 1830868 View attachment 1830869

Very nice! I just got a large collection of the flat ribbon style inductors. I’m eager to use them. Any chance I can get a frontal shot?

Dan

 

[mkane]

I have lot's of inductors I;m not using. What values do you need?

 

[IndyDucati]

ADS 910.
You can see my ridiculous electrolytic vs. film capacitor experiment

 

[mkane]

Different top hats.

 

[IndyDucati]

Here's the ugliest crossover I've ever seen...
ADC 303 AX

 

[mkane]

^there not going anywhere though. Nice and solid

 

[Ds2000]

Here's the ugliest crossover I've ever seen...
ADC 303 AX

“Hey boss, the flashing is done, what should I do with the rest of this?”

 

[motorstereo]

My dusty original 80's khorns crossover. Maybe someday I'll do a Crites or ALK crossover.

 

[Bratwurst7s]

I just recently revised the crossovers that I wrote about back in post #29.

Completely new tweeter and midrange boards that correct some mistakes and make some adjustments and upgrades. They look a bit rough but I haven't trimmed any of the leads yet until I'm sure that they will stay this way.



Cheers,
James

 

[Poultrygeist]

Here's a picture of the guts ( stuffing sleeve ) that make up the mass loading of the Lowther transmission line speakers ( abbreviated as MLTL )

 

[Poultrygeist]

The sleeve fills the cavity from the driver opening to the cord webbing just above the port,

 

[LinderK]

Stock xovers in my SentryIVb’s.
Slowly formulating a plan on redoing them...

 

[tubed]

distressed QLS-1 x/over

 

[tubed]

out of quarantine

 

[guyhifi]

Biggles

Biggles, do you recall where you got those tie-downs (whatever they are called) for the caps and resistors? I have been looking for something like that on eBay and Parts-Express with no luck. Perhaps I just don't know what to search for.

 

[drbiggles]

Biggles, do you recall where you got those tie-downs (whatever they are called) for the caps and resistors? I have been looking for something like that on eBay and Parts-Express with no luck. Perhaps I just don't know what to search for.

Those are cool, huh? I found them at the local hardware store right next to the standard ones. I also found them at my local pro electrical supply store.

Biggles

 

[Poultrygeist]

Fairly basic Swan 2 way crossovers in which hopefully less of that all important first watt is dissipated into heat.