• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

onkyo

  1. C

    onkyo m-506r light issue.

    Somebody was in here before me. I think? What is the correct wiring for the M-506R? Only one set of lights seems to be wanting the work when the relay kicks on. Thanks so much.
  2. R

    Onkyo CP-1046F - Please help repairing auto function

    Hello, I picked up this Onkyo and it's been working as a manual turntable. I'm trying to repair the auto function. The small gear that touches the motor was stripped so I replaced that. Now that all the gears are turning, I'm seeing that the rubber wheel isn't turning when it's supposed to...
  3. M

    Display Problem on Onkyo T65

    I've acquired an Onkyo TX-65 Receiver. All of the functions work on it, but when engaging Loudness, The Bass Expander, Auto Tuner on/off, or looking at the Signal meter, nothing lights up. Other parts of the same display panel work, such as the Phono/Tape/Aux/Vid Indicator, etc. Another...
  4. T

    Any knows how a screw can cause protect mode (on Onkyo TX-SR605)?

    A friend gave me an Onkyo TX-SR605 which got into protection mode right after being powered on. I was able to isolate it to a screw which secures the vertical PCB board to the horizontal amp board -- if I loosen the screw or take it out, the receiver works normally; if I tighten it all the way...
  5. M

    Rolling receivers/Onkyo TX-8++ vs 9++ series

    My world is 2ch. Even TV which is Hafler Hookup for rears. So, I rolled 3 receivers in and out of my main system which is tube separates because I picked up an Onkyo TX-80 as part of a bundle to get a Sony CD recorder. In the bedroom system it beat my class A amp, way sweeter. I have read where...
  6. J

    The mystery with Onkyo E-100 and E-200 speakers

    Onkyo in the 1981/2 years brought their E-100 and E-200 speakers to the US market. According to the onkyo marketing ad to dealers, these were positioned as affordable but still high margin. Yet there is almost no signs of these speakers now. Would anyone had heard them? Thanks.
  7. RogerALB

    My Collection Down In the HiFi Lair

    OK, well, let's see what is in the Lair: Ignoring the very top shelf as that is where the odds and ends are kept, we see that there's a B & O Beogram 3404 sitting on top of a Technics SL-PD8 and both are connected to the Beomaster 3000-2 on the next shelf down. The Beomaster is driving a Beovox...
  8. RogerALB

    New Member Introduction

    Greetings! I am a new member (finally decided to join) and am pleased to be here. I thought you might be interested to know that I have a Pioneer SX-450, a B & O 3000-2, an Onkyo TX-2500MkII, and a bunch of other stuff such as turntables, CD player, etc. I didn't start out to be a collector, it...
  9. J

    Onkyo TX-220 Left Channel Quieter

    I just got an Onkyo TX-220 Receiver. It looks and works great except the left channel is very quiet. I’ve tried changing out cables/speakers and I’ve played with the Balance Control and mono switch but the problem persists on both left A and B speakers. I don’t know much about the internals of...
  10. T

    Onkyo TK-2500 MKII Light Help

    Hello fellow audio goobers and nerds out there I need help with my receiver. I got this thing around a year and a half ago at goodwill for 20 dollars and it worked well except for the burnt out lights and dirty pots with i cleaned. I didn't bother fixing the lights because my setup wasn't ready...
  11. B

    Receiver wattage for McIntosh ML-10C speakers?

    I recently inherited a fully functional Pioneer SX-535 receiver (rated 20wpc). Will running this receiver with McIntosh ML-10C speakers cause excessive clipping even if I just listen at low-to-moderate volume in a smaller room? I also have an Onkyo TX-2500 MkII rated at 27wpc but currently...
  12. S

    Onkyo Integra Eq-35 LED type

    Greetings AK universe. Does anyone know the part number and/or specs the EQ-35 slider LEDs? Assuming it's polarized. I want to replace all for uniformity and don't want to cobble together a set of various used ones. Thanks
  13. richiesgr

    Background noise when connecting Amp to Pre-amp

    Hi I've received as a gift a turntable from my children. My amps is a Onkyo NR474 not really a musical amps and doesn't have a PHONO input. So I brought a PHONO pre-amp FOSI BOX-X4 with tube I connect the pre-amp to CD or PC input in the amp and connect the turntable to the pre-amp so far so...
  14. electrotek

    Onkyo A-9130 Volume Increase Causes Protection

    Hi legends! I recently acquired a 5 year old Onkyo A-9130 amp from a first-time owner who found it would cut out (assumably protection circuit) after the volume reached above about 10 o'clock (1/3rd power) if, and only if, music ("input") is playing. However, using headphones does not cause the...
  15. curtisw99

    Output Transistor Different than Service Manual - Onkyo TX-4500 mkii

    I'm trying to get this Onkyo Tx-4500 (just acquired, non-working) out of protection, so first place I went was to test the outputs. They measure good, but they do not match the transistors in the manual. are these the wrong transistors, or are they equivalent to the ones in the manual...
  16. G

    Onkyo TX-1500 MKll replace power supply capacitors

    I want to replace the power supply caps on my Onkyo TX-1500 MKll. Current installed caps are Marcon CE62W-C 47oouF 35WV. Have a hard time locating a replacement for them. Anyone have a idea were I can get replacements?
  17. JIBBLES

    Onkyo TX2500 Restoration Advice/Feedback

    Hi all. I could use some advice on my latest project. I've acquired (as the 2nd owner) a really well kept Onkyo TX2500 receiver. My list of upgrades/modifications might be lengthy (as there are subjectively 'better' receivers out there), but I'd really like to refresh this unit and have it be a...
  18. C

    Onkyo TX-SR805 Output Help

    Hello, I am very new to this site and this receiver. I just picked it up a few days ago, it played fine with the front speakers for a day. Now the left front seems to have no output and I’ve seen that is a well documented issue. I’m only interested in using it for stereo at the moment...
  19. Stereoboy70

    Onkyo TX 870 speaker protection circuit issues.

    I’m working on an Onkyo TX 870 receiver. The main rectifier blew up and took out some other transistors. It was blowing the main fuse every time but now it’s ok sisnce I’ve replaced several components. The issue now is the speaker relays won’t close. The 2 100uf caps and the big 3300uf cap...
  20. richiem46

    Onkyo tx-nr636 Firmware Upgrade Greatly improves function

    Several years ago I recommended to a friend that they purchase an Onkyo tx-nr636 receiver for their Home theater setup. I configured the system for them and it worked well for several years. They then remodeled and went with a sound bar and took the tx-nr636 out of service. They gave it to me...
  21. I

    Rca spk 375 speakers original woofer replacement

    Hello i recently purchased a pair of dimensia spk 375 for cheap as i didnt know anything about them i was unaware that the wooofers on both speakers have been replaced with gw 210/4 woofers but i would like to bring the speakers back to former glory would anyone know where i can get a set of...
  22. ccawker

    Onkyo A7 little bass on right side

    So,the left side is working fine and the right side tweets are working but very low signal on woofers. So I was dumb and while power is on i took the plugs out of the preout/main and heard a little something. Any ideas for this idiot.
  23. A

    Looking for an Onkyo Relay - A-RV401

    Hi everyone, Hope your day is going well. I'm looking for a replacement for the protect relay for a A-RV401. Google search shows nothing. The part number in the manual is: NRL-1P5A-DC12-36ZA Evidently, it's a 5A 12vDC relay. Thanks in advance.
  24. X

    Vintage or Modern ! Input and advice welcome * New setup build*

    interested in building a new home stereo setup from scratch.. should I go vintage or modern ? I am on a 5k budget MAX for components. I plan on using Canton Reference 9 bookshelf speakers . I was thinking of using a Vintage Marantz 510M Amp & Marantz 3600 preamp. Or should I go with a McIntosh...
  25. SuperToaste7

    Onkyo Scepter Mark II Series Project

    So I just wanted to make this post to just share some of my acquisitions from the previous year and some plans I have going forward for this long term project of mine. To start, I had purchased a set of Onkyo HM-300A MKII Horns earlier last year and planned to eventually get as much of the...
Back
Top Bottom