• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

remote

  1. phatterplatter

    Luxman R-115 and R-117 Remote Select and Front panel select BOONDOGGLE

    Hi gang, I got an R-117 in for service some weeks back . The main issue was one pwr amp blown to smithereens ( all transistors shorted) BUT the other issue that came up was that the Remote wouldnt command Source selection and neither would front panel buttons ( FM and AM for some reason are...
  2. buenastarde

    Anyone have a McIntosh D150 w/ a remote (HR087) + Open Source Remote Library

    I have a McIntosh D150 Digital Preamp/DAC, but it didn't come with the remote. I have given up on finding a used one at this point, and I cannot program a universal remote without the original to read the codes from. Does anyone have a D150 / HR087 remote? I would pay to borrow it for a day, or...
  3. DomPal

    Where to connect the sub on a Marantz 2270

    Hello, Is it right that you connect the sub on the remote speaker termials on a Maratnz 2270 and the stereo speakers on the main terminals? So when you are listening to music you should have both main and remote speakers switches turned on. Is this bad for the amplifier or is a 2270 made for...
    • DomPal
    • Thread
    • 2270 main marantz marantz 2270 remote speaker speaker terminal
    • Replies: 14
    • Forum: Marantz Audio
  4. W

    Contact info for Dared audio?

    Hello all - Does anyone have a suggestion on contacting Dared Audio? Messages through their main website (in Hong Kong?) go unanswered and I’m hoping someone her can direct me to a North American source (distributor, dealer, etc.) so I can get some info. The remote on my SL2000 preamp has...
    • WJBinSC
    • Thread
    • dared pre pre amp preamp remote tube
    • Replies: 2
    • Forum: Tube Audio
  5. W

    Dared SL 2000a tube preamp remote replacement?

    Hello all - I recently put this preamp back into my office setup and found the remote (the small blue one that looks like it goes on a keychain) to be non-functional. Replaced the battery and the red light is now continuously on. Tried to use it and the preamp had a squealing electronic sound...
  6. mtb_ww

    Adcom GTP-502/506 (Help needed)

    I have an Adcom GTP-502 that is still in daily use. However, the remote is DOA. I am having difficulty finding a replacement remote or remote codes for a universal remote. Any suggestions? Thanks in advance and greetings from NC. (PS: I believe the GTP-506 used the same remote too.)
    • mtb_ww
    • Thread
    • adcom code gtp-502 gtp-506 remote
    • Replies: 1
    • Forum: Solid State
  7. S

    RARE Yamaha Remote Connector VA-945900 ST Connector

    I am trying to find Yamaha ST 6-pin connector VA-945900 that was used in the late 90s - was part of RS-KW5 package or included with various receivers (mine is RX-730, RX-530 was another one). Trying to connect KX-W302 dual cassette to RX-730 remote VG80850...tried a couple places to no avail...
    • Synchro242
    • Thread
    • remote rs-kw5 va-945900 yamaha
    • Replies: 1
    • Forum: Yamaha
  8. S

    80s-90s Denon System Remote questions...

    Hello! I put together an 80s-90s Denon system. Wondering if there was a way to get everything on a universal remote or close to it: AVC-3030 Amplifier - came with Universal remote RC-162 TU380RD Tuner - can control with RC-162 (preset stations selection up and down) DCD590 CD Player - can ebay...
  9. G

    Can anybody tell me what this item is?

    I just recently came across this item and I can’t figure out what it is. On the bottom is printed August 1948. My guess is that it is a remote of some kind, perhaps for a television or radio. Any guidance would be greatly appreciated. Thank you.
  10. Number Nine

    Kenwood VR-4080 External IR Transmitter / Receiver

    I am looking for a Kenwood “IR-9991” IR Receiver. The Kenwood A/V Receiver, VR-4080 uses a remote that is a combination of RF and IR. The IR-9991 will allow the system to be controlled with IR only, allowing the use of modern “unifying remotes”. Anyone have one for sale or know of a substitute?
  11. L

    Yamaha RX-V757 remote control

    Hey guys new here. I bought Yamaha RX-V757 with a replacement remote (RAV315) but this remote is only good for power on/off input and volume controls. I can't get into the manual set-up with the remote or even with the front panel controls. Does anyone know how i can get into the manual set-up...
    • lenny26
    • Thread
    • av receiver avr remote remote control replacememt rx-v757 yamaha yamaha rx-v757
    • Replies: 2
    • Forum: Yamaha
  12. Donal64

    Fixed Yamaha RX-V757 volume buttons

    Recently acquired a Yamaha RX-V757 receiver that came with two RAV272 remote controls. The volume buttons on both remotes were non responsive. Couldn't figure it out. All the other buttons seem to work fine. Came across this article...
    • Donal64
    • Thread
    • remote rx-v757 yamaha
    • Replies: 2
    • Forum: Yamaha
  13. Donal64

    Is no remote for Yamaha RX-Vxxxx series a big deal?

    Been reading that the older AVRs are really good for sound, and can be had for not too much. So kinda got focused on older Yamaha RX-Vxxxx series avrs. What I have been noticing is that , in many cases, especially on ebay, there is no remote included. Have found that often, the remotes sell for...
  14. S

    Marantz 2270 Crackling Noise

    A few months ago I picked up a cheap Marantz 2270 - it's the model my folks had when I was growing up so I'm very fond of it and it sounded better than I was expecting...but it's starting to show its age (and price). Main issue is a loud, persistent crackling noise from the right channel -...
    • Shanol
    • Thread
    • channel crackle crackling main marantz noise receiver remote speaker
    • Replies: 6
    • Forum: Solid State
  15. msskks

    Yamaha Remote Problem

    The film connector on the far left of the circled connection in my Yamaha CX-800 connector isn't making a good connection. This is the connection that the Power, Mute, and Preset Up/Down buttons are connected to. Any ideas on repair?
    • msskks
    • Thread
    • cx-800 remote repair yamaha
    • Replies: 6
    • Forum: DIY
  16. bfotk

    Preamp shopping help

    As much as I hate to do it, it's time to swap out my AVA Transcendence preamp (the one built on a Dynaco chassis.) Here's what I want that I don't have now. Remote control Bluetooth Here's what I want that I DO have now. Phono input High level analog inputs Stereo/Mono switch Very good sound...
  17. G

    DIY remote bass knob

    I want to put together a wired bass controls for my Klipsch powered subwoofer. Just a knob to control level and crossover, just like you do on the back of the unit. I'll probably just replace the pots. To my knowledge, this doesn't exist as a product I could buy. Anyone have any luck doing...
    • gBlackMagic
    • Thread
    • amplifier bass knob diy klipsch klipsch reference premier mod remote remote control subwoofer subwoofer amp
    • Replies: 7
    • Forum: Home Theater & Video
  18. greenflash

    Rotel RA-945 amp won't start (probably after power cut)

    Hello I've been using very happily a RA 945 with remote control for a while, and one day (after a few days without using it) wouldn't power on. I mean it won't start the protection system or active the componente selector, because the STANDBY light DOES turn on. This happened after a day or...
  19. Ian Dozol

    Are Marantz Remotes RC interchangeable?

    I cannot find a thread of this nowhere in the whole internet! I have recently purchased a Marantz DV7600 DVD SACD. It is working perfectly but it did not come with its remote. As this is a older model from 2007, I cannot find its corresponding remote "RC7600". In ebay or other similar sites I...
    • Ian Dozol
    • Thread
    • control dv7600 harmony marantz rc001dv rc7600dv remote replacement sacd substitute
    • Replies: 8
    • Forum: Marantz Audio
  20. K

    Help fixing an RC430

    G'day all, I've been lurking a bit and finding some great info on the site for restoring some old marantz gear and it's all coming along nice. However I'm having some issues with a RC430 unit I picked up - doesn't seem to be powering up (no standby power - well LEDs not on). However, I've...
  21. C

    DBX 5BX remote

    Looking for the remote, codes or even I can design my own from existing. Just need to grab codes and type of the protocol from a real device. If anybody has it, 5bx unobtanium remote, please contact me, and we can discuss it. Not 100% sure but 4bx probably not the same and incompatible.
  22. S

    Amps with remote controls...?

    So I've been looking into upgrading my old Sony AV receiver (from 1994) I bought used years ago in college to a more modern stereo amp with network capabilities (bluetooth and wifi) but I don't absolutely need the wifi feature and I can always get a bluetooth adapter for line in) Anyways, I...
    • stephensmith
    • Thread
    • analog bluetooth controls digital onkyo tx-8160 pioneer sx-n30 remote remote control wi-fi yamaha r-n602
    • Replies: 16
    • Forum: General Audio Discussion
  23. M

    Using Only stereo speakers on a Home theater reciever

    Hi, I love my realistic nova 15s but hate the stereo receiver i've been using (Because of being too old for a remote). Its not a big deal to turn it on or off, but gets annoying when im going to sleep. I have a spare sony receiver but its for home theater multi speaker set ups, Would i be able...
  24. Edwin Powell

    Remote for Magnavox CDB-570 CD changer

    So I recently acquired a Magnavox CDB-570 six-disc CD changer in absolutely pristine condition. It's really hard to believe this thing is almost 30 years old (manufacture date is Aug. 1987). Even the Multidisc magazine is virtually without scratches. But like many older units, it parted ways...
  25. early RCA IR remote

    early RCA IR remote

    This remote is big because it was to house lots of analog encoder circuits designed at RCA Indy. A friend at RCA Labs developed a microprocessor based circuit for it. Bakeoff: Sets and remotes placed out in sunlit parking lot, analog encoder fails badly, micro works perfectly. Also much...
    • wa2ise
    • Media item
    • control remote
    • Comments: 0
    • Category: Horizontal Hold
Back
Top Bottom