• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sansui

  1. Dawid Ratal

    Wafer correct position (Dolby) Sansui 9090DB

    Hello all, I have a huge request for your help. I forgot to take a picture before the correct position of the Dolby wafer switch (pcb board F-2655). the receiver is a Sansui 9090DB in the 230V version. Does anyone of you have photos or knowledge of how it should be properly set up? I'm sure I...
  2. D

    G9000 - should I try to mend it

    Hi, 2nd owner of a G9000 - Had it for the best part of the last 20 years, but it has been in my life for 30 years at least. The original owner still asks me about it from time to time. Clearly these units mark for life ;) I've enjoyed it thoroughly for the first 10 years of my ownership, then...
    • djbono
    • Thread
    • channel drop out channel failure g9000 protector light restauration sansui
    • Replies: 5
    • Forum: Exclusively Sansui
  3. KeithD

    Sansui TU-999

    Picked up this tuner some months ago. It's working well, though I did have to replace the diode that regulates power for the stereo indicator. That repair made me think about a "recondition" for this tuner. I'm sure at least the power supply should be recapped; however, I can't find any...
    • KeithD
    • Thread
    • sansui tu-999
    • Replies: 18
    • Forum: Tuners
  4. john cronin

    Sansui AU717 F-2663 power board / Hum noise

    Hi all can someone please give me some advice, Ive just cleaned and and recapped an AU-717 and got confused regarding the the power output from F-2663. They should be +- 33V. I am am idiot as did not test voltages before I done the work so lesson now learnt. F-2663 voltages with Phono Stage...
  5. kennycrippen

    Speaker Upgrade for Sansui 7070, Considering Linton, Denton, KLH 3 or 5

    I've been searching the forums but don't see a lot about pairing some of the newer "vintage" looking speakers that have recently been produced with a true vintage receiver. My current set up is Sansui 7070, Dual 1229 w/ Shure M95Xe, with a pair of Sansui SP2000. I've used this set up for quite...
    • kennycrippen
    • Thread
    • jbl new vintage sansui sansui7070 wharfedale
    • Replies: 15
    • Forum: Speakers
  6. W

    Au-717 tech needed

    Hello all, I am usually over on the yamaha or marantz forums , but I am trying to help a friend get his au717 out of the basement and back into his system upstairs. we will appreciate any guidance you could give us. We are looking for a tech that can do a good re-cap, rebuild job on his AU 717...
  7. Wess

    Infinity RS76

    Hi guys, Does anyone have any info on these speakers? Not much online. Considering buying them for use on either my sansui 5900z of my kenwood ka8300. What are your thoughts? Thanks!
    • Wess
    • Thread
    • 1970's infinity kenwood loud system rs76 sansui speakers
    • Replies: 12
    • Forum: Dollars and Sense
  8. N

    JVC 4MM-1000 Receiver left channel is weaker

    hello mates, i have a problem with my JVC 4MM-1000 receiver, left channel sounds weaker. i already cleaned all pots and switches but still the same. any idea where to look at first? thanks
  9. N

    STANDARD SR-4500 SOLID STATE RECEIVER

    Hello anyone who has info about this vintage receiver? i need also schematics please. there is no voltage on the supply for the lamps. thanks
  10. K

    Adding Ceramic Caps to the Quad IC’s on a Sansui QRX-9001

    Hi, I’m trying to figure out how many ceramic caps to add and where to add them for noise reduction in the 4-ch section on my Sansui QRX-9001. I’m not having a lot of luck here. Anyone know/willing to help walk me through it/and or have pictures with the ceramics in place?
  11. L

    5000a keeps blowing fuses, help

    Hi Y’all, I just picked up a sansui 5000a on Craigslist yesterday, got it all plugged in today, sounds amazing….at least it did. After about 20 minutes the protection lamp came on and my speakers went quiet, which is fine. So I turned it off changed to my other outlet, everything seemed to be...
  12. U

    Sansui G-22000 VU meter without Amp stage

    Hello, I recently restored a G22000 and absolutely blown away by the clarity of the audio. However, the VU meters won’t working. I did some digging and noticed a burned resistor on the power supply to the VU meter, I patched that and noticed that the VU meters would respond when the unit is...
    • Utk
    • Thread
    • g-22000 sansui sansui g-22000 sansui g22000 vu meter
    • Replies: 6
    • Forum: Exclusively Sansui
  13. Wilburchubs

    Sansui TA-500 No FM or Meters

    Hi folks,having trouble with the TA-500 receiver, everything great via other sources,and AM,but the FM side is silent,no meters,no sound at all,not even static with muting switch off.There is a momentary noise (sounds like static but too short to really tell)when selecting but thats all. Any...
  14. jpreza

    Sansui R-70 advice very "bright" sound on R channel and no L channel audio

    Bought this receiver on a whim at a Goodwill store this past weekend. Nice little unit. It powers on. I know very little about Sansui as I'm mostly an HK and Pioneer guy. Anyway, no matter which input I select (AM/FM/Tape/Phono), there is no audio coming out of the Left channel. On the R...
  15. pumablues

    Seeking Help from Sansui Model 800 owners -- bulb wiring questions

    Hey all! Are there any other Sansui Model 800 owners out there? I'm working on restoring one, and a previous owner really mucked up the light bulb wiring (and apparently threw away both metal shrouds that covered the bulb assembly). Could anyone open theirs up, and share some photos of the stock...
  16. AmpRa

    Sansui 907 DC at speaker terminals

    Hello all, I have a Sansui AU-a907 audio amp. It sounds really really good!! A little problem is that there's about 250mv DC output at speaker terminals. I adjust it close to 0mv few times but when I turn it on the next day, it's out of wack. Both sides This amp has Integrated and Power amp...
  17. lsorrentino

    Sansui XP-99 motor drive tacho F.G. pcb adjustment

    Hello all, I'm trying to fix a Sansui turtable, last thing I had to fix was the platter rotation that was not completely stable, I had 0.22 speed variation, to make a long story short the problem was in the tachometric PCB alignment, after some work and some unsuccessful component substitution I...
    • lsorrentino
    • Thread
    • frequency good motor sansui speed tachometric
    • Replies: 0
    • Forum: Turntables
  18. jpreza

    Sansui R-30 Receiver - Replace LED(?) indicators and speaker/antenna terminals

    I recently picked up an R30 for nothing as someone was throwing it away. I tried to keep things out of landfills if possible. I noticed a couple of things right away: 1. ALL the spring loaded connectors were missing from the speaker terminals as well as the AM/FM antenna terminals 2. The...
  19. samurai3

    Sansui FR-D3

    Hello, I am considering purchasing a Sansui FR-D3 turntable and would like to know if I would need a Pre-Amp for a Pioneer SA-510 or a Cambridge A1 amp? I am new to this but would like to have a good sound. Alternatively, is there a recommended amp to buy used? Any advice would be useful. Thank...
  20. M

    Sansui Throne

    My first post, no I didn't introduce myself but I've been a long time lurker... Like years. I've gone from a basic system with my first turntable to a full on system I'm intending to restore on this thread with documentation. In this thread I intend to document the restoration of a CA-3000, 2...
  21. quadmatrix82

    Sansui b-2101 adjustments

    Hi sansui experts, I’m noticing a lot of errors in the sansui b-2101 manual, can anyone confirm the correct test points for bias adjustment especially the GND points? I read another thread stating the b-2102 was incorrect I suspect this is similar given the boards are not laid out the same from...
  22. Jefft91

    Sansui AU-717 muffled sound and what was causing it

    Before I start, I'm writing this without the aid of a schematic, so I'm not listing component reference designators. If there are any questions about specific components, please ask and I'll go back and check. I had an AU-717 on the bench this week. The owner reported it was going into protect...
  23. M

    Help please. Sansui AU 719 kill left channel

    Good evening, the left channel of my Sansui 719 died, it does not emit any sound through the speaker or through the left headphones, I can get stereo sound from the tape jacks to the computer; disassemble and check the fuses, all marked correctly; also check the rectifier (without disassembling)...
  24. A

    Sansui AU-3900 vs AU-217 vs 6060, which is better?

    Disclaimer: I’m reposting this because it’s time sensitive and my original post flew under the radar! Hey guys! I recently purchased a Sansui AU-3900 and honestly for a solid state it surprised me how tube-like it is, however one of the transistors is messed up so it’s giving me static...
    • Augie Pink
    • Thread
    • sansui sansui 6060 sansui au217 sansui au3900
    • Replies: 1
    • Forum: AK Polls
  25. JB8

    SANSUI 800 Rebuild - Tuning Meter Help

    Sansuist! After some much-appreciated assistance from some of you, I recently completed a successful refurb of my first Sansui, a 2000. The results were astonishing and I will not be selling the unit, like, ever. The sound is phenomenal in my opinion. So, I figured I try my luck with another...
Back
Top Bottom