• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

stands

  1. B

    Help IDing inspection sticker on AR stands found w/ KLH Model 6s

    Hi there! Recently moved into a new house that was built in 1960. While getting fiber internet installed, I had the technician drill through the side of the house to run the fiber cable into a small crawlspace behind a storage closet. While we were in there, I discovered a pair of KLH Model 6s...
    • BurritoEnigm
    • Thread
    • acoustic research klh model 6 stands stickers
    • Replies: 8
    • Forum: Speakers
  2. B

    Are stands necessary in this case?

    My furniture is capable of providing correct distance between speakers, correct distance of the speakers from walls and correct height to my listening position. Is there any other reason I should go for stands except for the visual ones?
  3. T

    Stands for KEF C200SW+C15

    Hey all, Yesterday I brought home a combo set of C15's + their (kinda) sub counterparts, the C200SW's. I found an old brochure that highlights the KEF C series. They used to sell stands separately that attach to the back of the SW's for the C15's rest on top of - please reference screenshots...
    • Tdaut
    • Thread
    • bracket system c15 c200sw new to me stands vintage kef
    • Replies: 15
    • Forum: Speakers
  4. C

    Yamaha NS-670 stands

    I’m going to be using a pair of Yamaha NS-670s as my main speakers. I’m looking for a set of stands. Recommendations??
  5. FireGuruMN

    Magnepan MGII Repair/Restore, Glue, Glue and more Glue

    I bought a pair of MGII last fall on CL for $200.00 with known issues. They sat around during the winter because there was no way quality control would allow stinky glue in the house. I once finished off an entire office with Victorian woodwork, built in shelves, wood ceiling and did all the...
    • FireGuruMN
    • Thread
    • capacitor crossover delamination finishing glue magnepan mg2 mgii restoration stands
    • Replies: 21
    • Forum: Speakers
  6. Zack Sainz

    Plyometric Box as Speaker Stand

    Hey all! I was wondering if anyone has used plyometric boxes as speaker stands for older floor standing speakers. They are only $30-40 per box. 13x13x6 My idea would be to drill some strategic holes, probably bottom four corners, use those holes to fill the frame with unscented kitty litter...
    • Zack Sainz
    • Thread
    • diy speaker stand stands
    • Replies: 3
    • Forum: DIY
  7. Klaatu561

    My new vintage speaker stands. And You?

    The sound is able flow under the speakers and sounds great. I say if you are going to go vintage- go vintage!
  8. mymonkey

    Speaker Stands for heavy floorstanding speakers

    I am looking for speaker stands 12" - 24" high that can handle up to 100 pounds each. I need a larger top plate also to safely balance that weight. I have a pair of Yamaha 690II's and the stands that i am currently using are crying for mercy. They barely handle the 65lb + speakers. I like...
    • mymonkey
    • Thread
    • speaker stands speakers stands
    • Replies: 83
    • Forum: Speakers
  9. Tin Bird

    Bookshelf Speakers vs. Floorstanding Speakers

    Anyone else, like me, prefer the sound of quality bookshelf speakers on nice stands over floorstanding speakers? Clarity, zero distortion, tight, punchy bass, decent sound staging vs. boomy/movie-theater-like bass that rattles the house. I like to hear the bass line, but I don't want all of my...
    • Tin Bird
    • Thread
    • bookshelf floorstanding stands
    • Replies: 121
    • Forum: Speakers
  10. estastereo

    Speaker stands for Sansui SP3500

    Looking for a good pair of speaker stands for my set of sp3500's can't find anything that I know will work and work well love these speakers would like to put them on some nice heavy duty stands . Any good experiences? Thanks all
  11. isaidwhat

    I DIY'd Myself Some Speaker Stands

    I put my jr high school wood shop skills to use and made myself a couple of speaker stands to get my JBL bookshelf speakers off the floor. Total cost was about $50 for the wood (just a 10x6 pine board and pre-turned legs from the local home improvement store). Just cut the board to length...
    • isaidwhat
    • Thread
    • diy jbl speakers stands
    • Replies: 9
    • Forum: DIY
  12. Rollasaurus

    Beefed up speaker stands

    I have a pair of inexpensive speaker stands that needed a bigger base to set my speakers on, so I did my own mods on them. Used vinyl veneer coated mdf and attached cork board cushion on each shelf. Attached shelving to each stand with 4 stainless steel screws. Much better base for the...
  13. Alpha Lima

    Stands for the Klipsch Epic CF-4

    Hello, folks. I have a pair of the Klipsch Epic CF-4 (version 1). A portrait of them is currently my avatar. These are big, beautiful sounding speakers - but they have a major flaw, one I'm convinced ultimately doomed the Epic line: the tweeters are placed too darn low, particularly for such a...
  14. lattiboy

    B&W CM (original) 3 speaker setup with stands in maple

    Hi all, First post, long time lurker. I picked up this set of speakers the other day off of CL. It's in gorgeous condition considering the age. From a smoke free home of an elderly audiophile. They are the discontinued CM2 bookshelf speakers and a CM C Centre, all in maple. It also included...
    • lattiboy
    • Thread
    • bowers centre cm series cm2 cmc england hifi stands wilkins
    • Replies: 1
    • Forum: Dollars and Sense
  15. R

    Mission 770 Freedom Stand Specs

    Found a pair of these speakers last year at a consignment store just as I was reading and first learning about audio stuff. Told my dad to buy them, that they were pretty highly regarded. My dad is absolutely in love with them; he is so happy I had him buy them. Every time I visit, we spend...
    • racer2086
    • Thread
    • 770 freedom mission stands
    • Replies: 17
    • Forum: Speakers
  16. 22-1

    22-1

    Here is my XRT22 speakers on stands. I took the stands away later based on Roger Russell's recommendation.
    • Rich Andrews
    • Media item
    • stands w/ xrt22
    • Comments: 1
    • Album: Rich's Pics
Back
Top Bottom