subwoofer

I had been running my subwoofer with the high level inputs by simply branching off the amp (see pic of old amp connection) with a banana splitter (which should be 12 gauge I believe). I decided I wanted to try out the line level input to sub since my preamp has two parallel outs. This original...

Hello all, I just picked up an RCA VMT-72W console for free on fb marketplace. It worked nearly perfectly--the only problem was the (stage) right subwoofer cracking intermittently. It would improve some when you fiddled with the balance knob but never fully went away. When i opened the back...

Hi - Long time lurker here! I searched the forum, but couldn’t find this exact situation. My apologies if I am asking about something that has already been answered many times. I have an opportunity to buy a friends JBL L10cs subwoofer at a very good price, but I am not sure how I would set...

I'm picking up a mint Speedwoofer 10U on the 6th and was wondering for those who have had the pleasure of hearing the 10U what are your thoughts? I know they used a beefy 375w RMS Class a/b analog amp. The driver is said to be overbuilt. I've saw guys say it's the only sub they found even up to...

Hi ak, it's been a while since I've been active here. Yesterday I traded an 80s Kenwood receiver for these visonik 602s at a local junk store. I haven't even gotten a chance to hear them yet, save for the short period I verified they worked, and already I found a speakerlab DAS-SW to pair with...

I'm looking for an under or behind couch subwoofer for a new home theatre. My receiver, an old JVC RX-7000V, requires a powered subwoofer. Some thoughts I've had: - Rockville Slim Shaker 10" (the most plug and play option, no 12v power supply needed), $300CAD - Pioneer TS-WH500A (have option...

Hi everyone, first post here. I've been lurking here for a while now and I'm in need of help. I am looking for a simple low pass filter for my Braun LW1 passive subwoofer. At the moment its simply connected to the amp with 2 pairs of speaker cable, along with a set of regular speakers. Channel...

Hi there, I recently purchase a set of 2nd hand Canton speakers (x 2) and a powered subwoofer. Subwoofer: CANTON AS 22 SC Speakers: CANTON PLUS XL I am getting audio through to the subwoofer, but no audio at all going to the 2 speakers. I have the audio connected from my laptop headphone...

I picked up a Canton Plus B Subwoofer a while back on Craigslist on the cheap. The speaker connections are 2 pin DINs. I bought some connectors and wired them up, but a couple of the connectors don't seem to "click" in, and the connection is not great. So I am looking to replace them with a...

I bought a pair of the 3D Acoustics satellite speakers for short money. Really sweet sounding speakers that beg for the matching subwoofer. Long story short, they did make a subwoofer 3D610B, with an internal crossover for the satellites. Much like the later Cambridge Soundworks Ensemble...

Hi Folks I picked up a vintage 8" PowerBass Active Subwoofer made by Rock Solid (part of the Bowers & Wilkins stable) last week. Given it's size, specifications and wattage, I am surprised and delighted with how well it fits into my set-up and room configuration. It is being fed a line level...

I have a Yamaha A-S501 running two sets of speakers in two different rooms. One room has a set of Tandberg Fasett speakers, which are not super dynamic. I was wondering what people think about putting a subwoofer in my basement to warm up the sound in the whole house. Good idea? Is the Yamaha...

So basically, I am getting an upgrade for my desktop speakers, I'm going from $20 Logitech plug and play speakers, to Sony SSCS5 bookshelf speakers, a Elac SUB1010 subwoofer, and i'm not sure what AMP I should get, or if I need an external DAC or preamp. In regards to AMPs, I'm thinking about...

Acoustic Audio by Goldwood PSW-10 Audiophile Series Powered Subwoofer using speaker level input & output.

Ok, I really did do a deep look to try to figure this out. I got in to my garage a couple of weeks ago, and found my old JBL L1's. Now, these are the only thing that survived a total loss house fire back in 2010, and only because I had taken them to a buddy's to try them on his system the week...

Hi everyone While I was walking my dogs I came across a Boston G2 subwoofer speaker for car audio at the park. Someone most have taken it off from their car and dumped it. So I took it home not just to keep the parks clean (I find all kinds of stuff when I walk my dogs, it is amazing, some at...

Looking to upgrade my subs and tweeters but I need some recommendations! Speakers are running off a Harman hk385i with a JVC QL-F4 turn table. Eventually everything will be upgraded thanks!

I am troubleshooting a no-sound issue on a Miller & Kreisel MX150 mkII. Before anything I checked the motion of the front woofer to find that the voice coil was stuck. Not rubbing but darn STUCK. ( figuring it was just a shifted plate issue ) I removed the magnets and plate, voice coil looked...

Blew one of the subs in my beloved Design Acoustics D-12s. It's a 10" sub with butyl surround, 8 ohm. Relatively unmarked, only serial numbers (DWA6 C5810305) – but I know it should be a CTS sub. Anyone know a replacement? I absolutely love these and need them firing again!

hello i hope im at the right place here but im a bit stuck im planning to buy a schiit gjallarhorn and a pair of pro-ject speaker box 5 s2 to add to my setup but the gjallarhorn only has 2 speaker connections latter down the line i wanna add a subwoofer to the setup but im not sure how to do...

I want to add REL HT-1810 subs to my system. But they have only LFE, low-level RCA, or XLR input. Mine Cayin-CS55 only has a speaker out. And before I buy two of the REL Airship II for 350€ each. I thought I could buy a preamp like Denafrips Hestia, and connect the SUB via XLR and the Cayin via...

So a few years back I had to change my PSB sub transformer as I moved from the US to Ireland. I replaced the transformer with a toroidal one and all was working perfectly for a few years. A few days ago I have very little output next to zero... When I put the volume up, a rapid noise occurs, and...

Hello Audiokarma, I'm in the market looking for a receiver/amp that can support my Klipsch F-300 Tower Speakers and a subwoofer input. Some websites claim 150 or 100 watts RMS per speaker with a 600 watt max. I'm not entirely sure what it's actual RMS is be the 100 or 150 but we can go with that...

I am looking to buy a subwoofer in the range of around 250-300W. These two appears to have similar specs (Audioengine S8 being 100 Euros more), and I am having a hard time deciding. I already owned Audioengine S8 and they sounded me the best at that price, but they turned out to be defective and...

Looking to redo a subwoofer I had made years ago. Drivers still in good shape. Old NHT Drivers NPT-11-083 10” Woofer (from NHT VT3) I also have the NHT plate amp. Want to run three in parallel (approx impedance of all three, 3.33-4 ohm) All specs from manufacturer data sheets: NPT-11-083 10”...