• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

suggestions

  1. sleepycrow

    First Time Setup (Elac Miracord 50h II tt) - Questions & Advice

    Hey, it’s me again. Just started to get back on the hunt for a receiver/and or amp. I’m very new to turntables and I’m just looking for something to help give quality sound. I normally listen to rock so I do like good bass, but my system will be set up in my small room, haha. I don’t mind if...
  2. Yeeterkeeter

    Whats the best stereo and set of speakers I can get used for 500~ dollars?

    I am looking to expand my current setup to include speakers and a proper stereo with pre amp inputs. Currently, I have a very robust headphone setup, with a SL-1200 & schiit mani piped into a schiit Vali. While I love my headphone setup, I would like to expand it to include a speaker system as...
  3. NathanFromPA

    New Stylus - Ortofon FF 15 XE MK II vs. Audio-Technica AT-110E

    I just got a Pioneer PL-5 on Facebook marketplace as a secondary system. (Yes, I can see the problem beginning....) It mostly keeps speed ok (and I'm not yet ready to dig into the disassembly required to clean the speed sensor and pots). However, it sounds *significantly* scratchier than my...
  4. L

    TC Sounds LMS5400 with vintage Acoustic Research AR-9's?

    Hi there... I just recently started upgrading my system and could use a bit of advice. I lucked out and snagged a pair of Vintage AR-9s at an auction for $100 bucks and decided that if I have good speakers I better have a good setup all around. I'm in the process of re-foaming them since they...
  5. John Carr

    Need 3-way Crossovers.

    I just recently finished building some custom speakers, but i only had a 2-way crossover on hand to try them out. I have done a fair amount of research trying to find some quality passive 3-way crossover units.I have spent a good amount of money on other parts and am limiting myself to not spend...
  6. Zack Sainz

    Salk Song3 BeAT

    Hey all! Recently I have caught upgraditis. Currently rocking KLH 5s (which I will keep forever) with Erhard Audio Buddies and the Aretha. During my research I stumbled over numerous brands and Salk has definitely stuck out. Does anyone have advice on how to demo anything from Salk...
  7. S

    Vintage sealed cab bookshelfs - what should I keep an eye out for?

    Looking to upgrade or add to my modest home setup. Running a 2.1 setup with my EPI100s (which I love) and a sub from my Yamaha TSR7850 receiver. I keep my eye out for local vintage finds and have had some fun with it, but haven't found anything that beats my EPIs - the closest I got my hands on...
  8. Tyler Prock

    Looking for a new low watt receiver any suggestions?? I’ve been looking at the sansui 350a

    Looking for a second receiver to pair with some herseys that have been modified with a more responsive driver and a dial in knob for the middle tweeters. Going in a very small space (my office) I’ve been looking at the sansui 350a but in a world where I can’t hear much of what I’m buying I would...
  9. SgtBilko

    Looking for some Altec A7 VOTT speaker system suggestions

    My first post. Looking for some Altec speaker system suggestions. I have an odd mix of Altec's without a good plan yet … back in the early 1980’s I first fell in love with the sound of Altec VOTT A7’s that I used in a 1920’s era 2,500 seat auditorium. I bought my first pair of vintage A7’s from...
  10. Zack Sainz

    Scott 299B Tube Rolling

    Hey all! Happy New Year! Using my Scott with recapped KLH 5s, this pairing makes me quite happy! But now, I think it’s time to roll! I replaced my JJ output tubes with 6P14P-ER Gold Grids and they sound great! (I’m definitely going to buy another set as a back up) Next up: 6u8: I haven’t...
  11. JMiP

    Replacements for AR 2ax

    So, a friend of mine has fallen in love with my (recapped) Acoustic Research 2ax speakers and wants to buy them from me. Well, I really like them too, but like many of y'all, I have a problem with settling down with just one system. One thing besides excellent sound, these guys have a high WAF...
  12. Isaac C.

    Looking for Tonearm Wire Suggestions

    Hello everyone, I plan on rewiring my NOS Syntec S-220 in the next couple of weeks because it has some faulty wiring which is causing some hum and noise. What is some recommended wire to use? Im looking for something easy to work with, can be stripped with a soldering iron or fingers, and less...
  13. F-Tank

    Integrated Amp Suggestions

    Hello All I am new to this forum and so I hope I am going about this the right way. I guess what I'm looking for is a little bit of education and some recommendations. Anyway lets get to it: My current set up is ProJect Debut Carbon DC TT, ProJect PhonoBox S2, ProJect PreBox S2 Digital (Tidal...
  14. R. Mallow

    System Advice--recommendations for next upgrade?

    Hi all, I'm hoping this ends up in the right forum. I'm a frequent reader on AK, but I almost never post because I am not very knowledgeable from a technical standpoint and much less knowledgeable than others from the standpoint of sampling a lot of different gear. I love my current gear...
  15. B

    Need Help / Suggestions on Best Configuration - Sansui 2000x

    Hi everyone... I'm brand new (second post!) to AK, and was hoping for suggestions on the best way to configure my setup. I'm reposting this from "Members Systems." I'm looking to get the best sound as possible with what I've got, and looking for suggestions on which inputs / setting to use on...
  16. B

    Need Help / Suggestions on Best Configuration

    Hi everyone... I'm brand new (first post!) to AK, and was hoping for suggestions on the best way to configure my equipment. I'm looking to get the best sound as possible with what I've got, and looking for suggestions on which inputs / setting to use on the turntables, receiver and mixer... any...
  17. sjsurman

    Tips on replacing a bent Dual 1229 tonearm.

    Hey forum, I am very new to AK. I have a Dual 1229 with a slightly bent tonearm. Looks as though something heavy fell on it from above. There is a new old stock replacement tonearm part number 218 238, pictured, that I'm considering purchasing. It comes with the headshell and lead wires. Any...
  18. HiFiAaron

    What to power Renaissance 80's with?!?!

    I have a pair of Renaissance 80's and was uncertain weather to keep them or not. But after listening to them many times the hunt for a better amplifier begins. I'm currently using a Samson s1000 amp and a Yamaha RX-V663 receiver as a preamp to power them. I am pretty satisfied with the the...
  19. lttnorth

    Exchanging my Nak RX-202...any suggestions?

    I've owned the RX-202 for about a year but it had problems from the time I bought it. The left channel went silent every now and then, but then it'd momentarily peak if I tapped on the deck or shifted it around during playback. Also it had this really annoying quirk when it got near the end of...
  20. lambfriend

    Good TT for $100?

    Hello, So my current TT (Sanyo TPX-3) crapped the bed on me. I've had it for about 4 years now and it's been ok. I've been wanting to upgrade anyways so it's not too bad. I have a budget of around $100-$120. Any suggestions?
  21. Jim Renaud

    Amplifier Suggestions

    I have a Dual CS 505-3 turntable and just scored some free Bowers & Wilkins DM2 MK2. My Kenwood KR-720 is fine for my bedroom set up (40wpc) powering some JBL shelf speakers, but I think I'll need some more beef for these power hungry B&W's. Ideally, I'd like to keep the amplifier vintage to...
  22. EinWindir

    Would like some testimonials on a few tables in the $300-$400 range

    inb4, if there is an existing thread or a better place for this discussion to happen, please let me know. Thanks to tax return season I'm ready to upgrade my current economy turntable (Teac TN100). I'm looking for a brand new table up to $400...perhaps slightly higher if something piques my...
  23. N

    My first Marantz to be...

    Hello everyone, This is my very first post here on Audiokarma and from what I've read, it seems to be the right place to come for the kind of info and feedback I'm looking for. I'm completely new to HiFi and never really thought getting serious about it until a few weeks back when I went to a...
  24. hotrodman21

    Will an Ortofan 2M Red fit my turntable...

    Hello All, I have a Pioneer Pl-50 turntable, and after trying in vein to align my Cart (PC-35) I'm looking to modernize my turntable just a bit. Moreso, I would just like a cartridge that is a bit newer. Maybe I'm wrong, maybe my cart is one of the best ever made. That's why I'm here, is to ask...
Back
Top Bottom