thorens

Having not owned a turntable in 45 years, I have what may be a very newbie question. I just acquired a Thorens TD 160 Mk I with the standard TP16 tone arm (effective length 230 mm, mounting radius 215.60 mm, 14.4 mm overhang, 22.00 degree tonearm/headshell angle, 16.5g effective mass). The...

Hi all, My pre-pandemic purchase was a Thorens TD165; this was right when it was more common than not to believe it would be a month-long thing and we'd all move on. Alas! So, it became a project turntable. I even had designs to learn how to solder (I never did). And after purchasing a bunch...

Hi all, My system is presently… Thorens TD125 with SME 3009 (first heavier version I believe) and Ortofon 2M Bronze -> Graham Slee Special Edition 2 -> Bryston 3B (the old one) -> B&W DM640 (still in excellent condition, not used very much). The room is small… 9’ x 12’. When listening to new...

Hello! I recently moved to Europe from the USA with my Thorens 166. I'm using a voltage converter, but it's not working reliably. It is not getting up to speed. I know these turntables were meant to be used on either 50 or 60hz, but I'm afraid I don't understand how to switch from one to the...

There is a cap and a resistor in the thorens td165. How important is it to use mkt cap again in this circuit? I ordered a mkp and then saw somebody on eBay selling kits for the thorens and they used some mumbo jumbo about the importance of mkt in the circuit, which doesn't have to do with audio...

I recently acquired another Thorens TD-160. It came from its original owner, and cake equipped with a cartridge that is a mystery to me. There are no markings or labels or any other kind of identifying information on it. Any assistance on what cartridge this may be would be greatly appreciated...

Well, at least I know I'm not going crazy. I was just listening to and enjoying Beethoven's Sonata No. 1, Op.12 in D for violin and piano, Isaac Stern and Eugene Istomin, on CBS Masterworks I2M 39680... and yet it just didn't sound like it was in D... and I KNOW that sonata.. I've played it on...

Hi, I have a Thorens TD150 mki with the stock TP13 tonearm. It’s fitted with the Shure v15iii cart/stylus. For some reason I can hear every tap/touch of the tonearm itself. I’m wondering if anyone has had similar issues? Or might have an idea as to why this might be happening?

Hello and good morning! I have a Thorens TD 145 mk1 that I cannot get the platter to “bite” on startup. It spins fine, but I have to push the platter to get it going, otherwise it slips on the motor spindle. Once going it spins at 33.3. I have a brand new Thorens belt too. Spindle and platter...

While I was fiddling with my turntable a few days ago, I wondered where I had stored the photos I took in its early days. I had torn down and revised the motor and the arm, worked on the axle, replaced the capacitor, set the eddy current brake. I didn't find things back on my laptop or backups...

I have seen some comments that say this is 2 grams.....is there any problem created if I use a weight of 2.6 grams. Thanks.

Working on a system to use in an RV camper trailer, space is very limited and the components have to be from existing stuff. Right now I’ve decided to make a folding table to mount inside a cabinet underneath the TV stereo system that came in the RV, it’s the only viable space and it’s in the...

Hello to all the Thorens experts out there. I have a TD-166 MK II that I have owned since new. I have recently gotten back into stereo gear after several decades (life gets in the way). My Thorens TT has become the 3rd of my three current tables. I also have a collection of vintage crank...

It's being offered via eBay and looks a bit better (and more Thorens-like) than the Swiss one.

So the Thorens TD 403 DD is apparently one of the newer models released some time in the last couple of years, it intrigues me. I am currently rocking a Pioneer PLX1000 which is great, however the useless idiot in me is always considering shinier, more expensive items which would constitute a...

A while back I picked up a Thorens TD-105 turntable mostly for the Stanton 881 cartridge which was worth more than what I paid for the table. Surprisingly the table is not that bad and I will probably keep it for something to pass down to one of my kids. Currently restoring a TD-165 and a Dual...

Any phone prestage recommendations to pair with my system? What do you recommend for a MM phono stage standalone upgrade for my Thorens TD160 with MM cart? It is driven currently by McIntosh 2505 and C26. Current speakers are JBL 4311 with a SVS sub. Price range is sub $600 Thanks friends!

Hi guys! I was experimenting with thinner mats than my 5 mm Funk Firm Achromat that got a little warped. So I noticed that even with the tonearm pivot all the way down and a 3 mm spacer over the cartridge, the tonearm is still sloping towards the headshell. To be honest, even with the Achromat...

I have been getting my vinyl situation together. I have a TD160 that works reasonably well and I'm going to have it gone over. Before I do that, I want to figure out the optimum, although not too spendy, cartridge for it. I have a Grado Silver Mk. I and honestly, I love the sound I get, but...

Hi, I have hit a wall and would love some help! I have recently started to get into turntables as I have been fascinated by speakers and receivers for some time and it was an inevitable next step. I have a knack for finding old things and fixing them, speakers, receivers, etc, but I told myself...

I recently reinstalled the TP13 tonearm (the one without the anti skate) with the Shure v15iii cart/Jico SAS stylus and have been incredibly surprised at how good it sounded. Is this an underrated tonearm? I had an SME 3009 on here which also sounded great but the TP13 seems to be pretty darn...

With apologies to Prince.... I have for a long time used a TD-165 which I've always found nice, but it's never quite blown my socks off, nice. So in an effort to scratch that itch, I recently picked up a TD-150 which was in need of a little bit of love. Pictured below as purchased, from the...

This is the start of my latest Thorens TD-160 Project. Hope we can generate some good learning points and discussions for keeping these engineering marvels in top performing shape. Most of my updates will be via video links posted to my YT Channel and linked herein from time to time. Tips and...

Hey all About a month ago I purchased a Thorens TD-160 from a very reputable seller on Canuck Audio Mart, at first I thought there may have been a slight motor knock but it wasn’t anything too serious Now the knocking is a little bit worse but I’m now noticing that my tonearm/cartridge is...

Hi! This is my first post in this forum. I recently bought a Thorens TD 166 MKII with a TP11 tonearm that has the TP62 arm tube (the one with the metal headshell) and it seems the TP62 is a very bad fit for the TD 166 mkII. I have attached a Stanton EEE 681 cartridge, which is 18 mm high, and in...