• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

tonearm

  1. LocalGiraffe

    Denon DL-103R w/ Shibata for Marantz 6370Q... good match?

    Someone is selling me their Denon DL-103R with shibata needle for around $250. Really tempted to buy it, but from what I understand the 103r likes to have a heavy tonearm. Not too sure if my 6370Q is considered "heavy" enough for this Denon to truly shine. Think it's more of a medium than a...
  2. Homebrook

    Grace G-707 Tonearm: How to Set the Antiskate

    I have recently come to own a Kenwood KD-550 turntable with a Grace G-707 tonearm. I have set it up as best I can carefully following the directions in the manual. I think I have it mostly set up properly, and it does seem to be working well. However the one thing I am not entirely sure of is...
  3. M

    Automatic turntable doesn't drop needle

    My Sony PS-LX30 doesn't lower the tonearm when I try to play records. If I turn it off and back on again then it starts working like normal. Sometimes that takes a few tries. It also stops working when I leave it on for a bit without using it. Does anyone know what could be causing this?
    • m666
    • Thread
    • automatic help sony tonearm
    • Replies: 1
    • Forum: Turntables
  4. BA3000

    Someone please help ID my tonearm

    Hey Everyone. I’ve been following the forums for quite a while, but just recently signed up and this is my first post. I was hoping someone might be able to identify the make and model of my tonearm. There is no apparent brand name or logo visible. I bought my whole turntable setup that it’s...
    • BA3000
    • Thread
    • hw-19 identify koetsu make model tonearm vpi
    • Replies: 6
    • Forum: Turntables
  5. redondo2018

    ADC ZLM - will it match with any of these tables/arms I have?

    Just picked up an ADC ZLM with what looks like a fair amount of tip left on it. Would love to try it out, but after reading about its delicate suspension I'm not sure if I have a match in tables/arms (I have a bunch of tables, including now the Miida T-3115 table this was mounted on). All of...
  6. S

    Tonearm lead blue wire snapped. How can I replace it?

    I was trying to remove a cartridge from a Panasonic SL H203 and when unplugging the wires i went too far on the blue one it snapped, is there a way to fix it? I'm okay with soldering, I have a multimeter and have like 30$ budget. The wires can be accessed from the bottom of the counterweight...
    • sabalennon
    • Thread
    • blue headshell panasonic solder tonearm wire
    • Replies: 5
    • Forum: Turntables
  7. B

    Can you make a counterweight to turn a 9 inch tonearm into a 12 inch?

    I’m trying to make a mission 774 into a 12 inch tonearm and have found a wand for one. I’m a little intimidated by creating a counterweight for it and was wondering if anyone would have any ideas on how to proceed. Is there an equation I have to follow to come up with the ideal counterweight...
    • Bnoyes12
    • Thread
    • 12 inch tonearm counterweight mission 774 tonearm
    • Replies: 6
    • Forum: Turntables
  8. M

    New TT with Grace 707mkII - A few questions

    Hi everyone, I've finally managed to acquire a new to me kenwood kd-500 with a grace 707 mkII installed. I have not installed my adc xlm mkII cartridge yet but plan to this weekend. I've noticed a couple of odd things about the tonearm since getting the table home and looking at the grace 707...
    • mltl
    • Thread
    • grace g-707 grace g-707 mkii kenwood kd 500 tonearm
    • Replies: 21
    • Forum: Turntables
  9. B

    SME 3012R Confusion

    I’m looking for an sme 3012R and found one for not a horrible price. Only thing is the counter weight looks different. I’ve tried finding the reason but unless it’s right in front of me and I’m not seeing it, I can’t find anything.these are the examples. I’m looking at the one that looks like...
  10. B

    SME 3012 Type II vs. SME3012R

    I’m right now thinking about getting an sme 3012 type II but an older friend of my dad’s keeps telling me that the 3012r is way better as it’s made of steel vs aluminum. Is there a difference with the sound? I would assume the steel one is higher mass. I just don’t know if it’s worth the extra...
  11. B

    ADC Pritchard Headshell

    I was wondering if it’s possible to make a proper headshell for the ADC Pritchard from scratch. Any help or advice is appreciated!
  12. pixelriffic

    Name that tonearm

    It's the hot new game! We took an old tonearm in as part of a trade, and it has no identifying marks. In fact we took in two of them, with slight variations. The headshell is clearly a modern clone. Almost positively Japanese made, and probably pre 1970. Perhaps Jelco? If anyone can...
  13. B

    SME tonearm differences

    How do you tell the difference between the SME series I vs. II and the improved version? I’m getting a TD125 mkii without a tonearm and can’t think of a better option than an SME but never really knew the differences between all of them besides the clearly different type III. Thanks, -Brian
  14. L

    Technics SL-220 tonearm wont go down to record

    Hi There, Hoping for some help with this Technics table. I recently tuned it up for a client who then proceeded to drop the table while moving it. At first, they thought the cueing wasn't working but the cueing system seems fine. The problem is even with the cue down and the counterweight...
  15. Alec Heggen

    KD-5033 Auto-In Lift and Return Lift Issues

    Hello, I know its cheesy to make your first post in any forum one asking for help but I've got a 1974-76 Kenwood KD-5033 that needs a little help. I've already done quite a bit of cleaning underneath and oiling the internals as well. However, despite everything else working perfectly (cuing in...
    • Alec Heggen
    • Thread
    • auto return help kenwood lifter tonearm tonearm adjustment
    • Replies: 4
    • Forum: Turntables
  16. Kelso1

    ATP-12T questions and setup

    Hello everyone. Long time reader, first time poster here. I'm needing information on setting up a newly acquired turntable. I have a Technics SP-15 with the ATP-12T tonearm. The tonearm is missing the headshell and I do not understand if a certain headshell needs to be used or what the...
    • Kelso1
    • Thread
    • atp atp-12t audio headshell sp-15 sp15 technica technics tone arm tonearm
    • Replies: 17
    • Forum: Turntables
  17. J

    Marc Morin style mods for AR XB Tonearm

    Sounds like this guy was an absolute legend. Does anyone on here do the same mods to the tonearms he did? I'm happy to send it away for this
  18. VintageDutch

    Tonearm dampening

    Hi,, I am in the procces of remoddeling, upgrading, rebuilding,nicer making of a Audion or Marlux MX-960. It is not a bad TT, has it flaws and probably be never top of the line, but I like tinckering with it...and after a heafty repair witch I had to do myself, I now stript the plinth from...
    • VintageDutch
    • Thread
    • audion diy marlux mx-960 plinth rebuild remodel tonearm
    • Replies: 22
    • Forum: Turntables
  19. swcrites

    What kind of solder and what temperature for tonearm wires?

    Hello all, hope you had a good holiday and that your new year goes well. Ok, so I'm currently working on my Technics SL-1400 MK1 that I've had for many years. Unfortunately, several years ago I thought it would be a good idea to try to 'self ground' the turntable. Looking at my handy work from...
  20. pixelriffic

    Can anyone identify this tonearm?

    This tonearm was found in storage. It is not likely one sold as a component like a Grace or a Jelco, as there is no integrated cue. The plastic piece with the red indicator is probably the most distinctive part. Any thoughts on the make and model(s) of the likely table? Thanks for looking.
  21. cosme

    Pioneer PL-516 - Stylus Jumping Grooves

    I didn't see a general troubleshooting thread, so apologies ahead of time if there is one. I have a Pioneer PL-516 that looks to be in pretty good condition. Clean belt, well oiled parts, proper cartridge/stylus placement (49mm), balanced tonearm, etc. However, when I put a record on, I hear a...
    • cosme
    • Thread
    • pioneer pioneer pl-516 pl-516 skipping stylus tonearm turntable
    • Replies: 12
    • Forum: Turntables
  22. willdownes4

    Pioneer PL-550 Tonearm looping grooves, tonearm resistance

    Hi everyone, long time lurker first time poster. I've just come in to possession of a beautiful PL-550. After getting set up with a Denon DL-110 and giving it a spin I am loving this table. It's been restored recently and the cartridge sounds incredible. After 10 or so hours of listening...
  23. benindavis

    source for tone arm wire?

    Hi all! So yeah I've got a project, ... got an old Sansui tt that was home to a mouse for a while. The wire in the tone arm is teeeny... anyone know of a source and what gauge I should use? Thanks!! Ben
    • benindavis
    • Thread
    • tonearm turntable
    • Replies: 2
    • Forum: DIY
  24. Worthy_Wax

    Aurex Sr-B2 Thrift store find

    Hello All, I just purchased the below pictured turntable from Value Village. It needs a new belt, cartridge and headshell. But I figured, for $15 it would be a great starting table for my cousin. My question, however, is twofold. As there is not much info online about the able itself, I was...
    • Worthy_Wax
    • Thread
    • aurex thrift tonearm toshiba turntable
    • Replies: 10
    • Forum: Turntables
  25. O

    Help with Tonearm identification

    Hi all, I picked up this nice Luxman PD131 TT with an unidentified tonearm. No markings or labels to be found. Can anyone help? Thanks, Jim
Back
Top Bottom