I had purchased a MAC 1900 that cosmetically was very nice, but internally was an absolute disaster. Took on this project and I hope that some of the work I did might help others.
First off, I replaced some of the key transistors (orange/yellow dot, flying saucers, etc.) and changed all the...
I recently bought a second-hand Mitsubishi DA-U530 integrated stereo amplifier with a broken balance control. Adjusting the balance to the left produces crackling sounds in the right channel but does not change the output power of either channel (as indicated on the amplifier), except for it...
Hello! I’m having an issue with my Kenwood KR-5600 receiver. When I listen to FM radio, sound only comes out of the Left speaker. When I turn the balance knob all the way to the right, I can hear a very quiet signal in the right speaker, but the Left signal is sooo much louder than the right...
Hi guys!
Do you have any idea where I can get 2.5 mm TRRS locking connector for Sennheiser HD599 ?
I want to build my own cable, compatible with my MD Player ( Balanced )
But buying and then cutting expensive cable I'm not inclined.
Hey everyone, I have a Kenwood KR-4070 that I've used for about two years now with no problems but recently I noticed that the right channel is very quiet, but only while running through either the Aux or Tape inputs. The Phono input works flawlessly and has great sound through both L/R...
Hello all --
I turned on my system this morning and noticed R channel output is lower than L channel output on the meters of both preamp and amp. When I push the mono switch both channels sound and look to be on the meters at the same level. Now here is the strange part. When I tried to...
Back around 1995 I saw a "Free" post in HP's internal ads for a Scott LK-72. Luckily I was the first to claim it (a gold-face, neatly built unit, in mostly pristine condition). It came with original instruction book and a note saying one of the 0.1 uf was leaking and needed replacement. As...
I have a Marantz 1060 that I bought not working and tried to rebuild about a year ago. I recapped everything except P-400 and replaced the fried outputs and the filter caps. When I got it, it was a dead short on the dbt and after replacing everything and adjusting the amps using the...
I have the ATLP120USB. Whenever I record songs to Audacity (the software packaged with my turntable) the right channel was clearly not recording as high as the left channel. I was initially using the balance control on the software to fix it. But I found out something that made a night and day...
I am have trouble finding a Balance Audio Potentiometer to fit my Marantz 2230 stereo receiver. Mine is trash and will not work, I is broken internally. I would not care if I have to use a new one on it as it works and is the same specs. I have heard that a 2215, 2230 and a 2270 will work if I...
Hi to all , I have a problem.on my pioneer sa 8800 where the dc balance on right channel when set to 0 mV result not stable and increase to 100mV..... now I hear in the same channel distortion music....and only after few minutes and after turn off and turn on the power amp again the music going...
Hello fellow AK'ers. Wondering if anyone currently has a 2010 or 2015 baby Marantz open and can snap a clear pic of the wiring for the balance slider? Fixing one where someone else was obviously in here and boogered things up. The two blue wires are just dangling and no clear indication from...
Hi
I have som scratch on my balance button, but i have trouble getting to the potmeter behind it. So any advice would be appreciated. Rigth now i wonder if the bottom plate comes off the receiver?
Help is much appreciated
Best regard
Morten
Hello all, I was hoping someone could give a little advise to my situation.
I picked up a Realistic STA 820 on the cheap, and it has an issue with the balance. Now, I've had similar balance issues before but only with headphones.
The left channel is out, and the right works.
However, when I...
Hey all, bear with me as I try to clearly communicate what is going on in my noob head.
So...I have a Sansui 661, Marantz 2230, and McIntosh MC250 hooked up to some Klipsch Quartets. It sounded good but I wanted to see what some modern electronics would do to the room. Not really looking to...
Hello,
I've got a 2226 with a balance slider that has been snapped off at the knob and am looking to replace it. Does anyone know what the part number is? I've been looking on that one auction site and have found parts from other units, but not the 2226 specifically. Is the balance slider...
I picked up a cosmetically minty looking Marantz 2015 this morning. Unit was advertised as having some issues: missing right channel and lights out. Bought it hoping it was dirty pots or maybe a bad capacitor. This one however has me a bit stumped. Unit is clean inside and out. No obvious...
Hey All,
Just picked up a little 221 that is in fantastic shape; using it in my office with Minimus 7W's. Beautiful little set-up that sounds really great.
I have noticed that the right channel will lose some volume and cut out completely or be very stifled. When I lift the receiver up so it...
Hey all,
I have this posted in the Solid State Receiver section...but after a couple of days, I have not received any responses and/or support. So I figured I'd give the Yammie sub-section a holler.
In a recent purchase, I had a Yamaha RX-700u thrown in because the older woman was going to...
Hey all,
In a recent purchase, I had a Yamaha RX-700u thrown in because the older woman was going to take it to Goodwill, so I gladly took it off her hands for free. I know that it could look like she was getting rid of it because it was broken, but I do not believe that to be the case. The...