• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

onkyo

  1. S

    Onkyo TA-W88 service/repair

    I have an Onkyo TA-W88 dual cassette deck that has not been used in the past 20 years or so. Unboxed it a few days ago and it powered up fine but that's about it. I'm sure it's in need of a good cleaning and most likely belt replacements. I don't pretend to have the skills required to take on...
    • ShelterFan
    • Thread
    • onkyo repair ta-w88
    • Replies: 0
    • Forum: Tape
  2. lattiboy

    Finally getting a little serious about vinyl, advice appreciated on setup

    Hey all, I've been running an Ortofon 2mm red with an old Dual turntable for very occasional vinyl listening and it's been fine, but the left channel is going out and the dust cover is busted. Because of the winter cold I'm spending a lot more time in my living room where the TT setup lives...
    • lattiboy
    • Thread
    • onkyo ortofon pro-ject turntabe and speakers vinyl
    • Replies: 6
    • Forum: Turntables
  3. B

    Onkyo M-510 Grand Integra Parts...

    Hello looking for the power supply board for my M510... please advise is you know of any place to buy this part (used i guess) it can be 100volt or 230volt thanks albert
  4. G

    2 Ch Receiver (with Phono) $300 or less, please recommend

    Hi all, I'm helping my mom research a receiver for my dad's stereo. My dad has an early 80s setup with a Technics turntable with MM cart, and Boston Acoustic speakers, smallish, I think they are the A60s. What's happening is that there is a hum when using the TT, and I have purchased a new...
    • gnuyork
    • Thread
    • boston accoustics cambridge audio onkyo onkyo a-9010 technics yamaha
    • Replies: 29
    • Forum: Solid State
  5. Francis55

    Onkyo Tuner

    Is this vintage Onkyo tuner of any quality at all?
    • Francis55
    • Thread
    • onkyo onkyo receiver onkyo tuner
    • Replies: 3
    • Forum: Tuners
  6. Francis55

    Onkyo Turntable--Thoughts?

    Does this turntable have any redeeming qualities? Not sure what model, hard to read the script from the picture.
  7. A

    Should I buy a Used Athem MRX 710 vs new Onkyo RZ-810

    Used Athem MRX 710 vs new Onkyo RZ-810 What do you think would be best? I can buy an Onkyo RZ800 refurbished by Onkyo, with a one-year warranty (3-years for $85 more) or an RZ810 open box for $550 or $699 for a New one with a 3-year warrranty or a used Athem MRX 710 (December 2013 era) for...
  8. H

    A/V receivers pre-out levels and amplifiers input sensitivity

    Looking to add an Outlaw 5000 amp to my Onkyo TX-NR809 A/V receiver. Outlaw advises that the published pre-amp output of my receiver (200mV ) is not enough to get their amps to produce full output. The maximum pre-out level is 4.7V, . It seems to me that 4.7V should be more than enough input...
  9. R

    Onkyo TX-2500 - 'wobbling sound'

    Hello everyone, I've got an Onkyo TX-2500 receiver back home with Jamo 28 speakers. Everything worked perfect, however since a couple of weeks the speakers give a 'wobbling' sound. I realize, 'wobbling' is a vague term so I'll try to explain it in detail. After I turn on the receiver, both...
    • RobbertHesen
    • Thread
    • help needed jamo onkyo repair speaker tuner
    • Replies: 10
    • Forum: Speakers
  10. bdmcn71

    Onkyo Integra M-5030 + Pre-amp P-3030

    Hello all! Looking for feedback and info on my setup. I'm torn whether or not to swap out for all-in-one vintage Marantz or stay put. Your opinions and feedback are certainly welcome. I need guidance! I have this combo: Onkyo Integra Power Amp M-5030 and Pre-amp P-3030. Also, an ADS P2...
  11. tiy3

    Repair recommendations for Onkyo P-303 preamp

    I have a P-303 that has a failing left output channel. It still outputs a very weak signal that minimally increases/decreases in volume in response to the volume control, and is also crackling at the same time in equal measure to the volume. This started out of the blue today and is totally...
  12. tiy3

    ONKYO C-N7050 Network CD Player

    Anyone have any experience with one of these? From what I can tell it looks like the 7030 CD player with network, USB/iPod and streaming features added. Considering buying one from overseas, or alternatively just getting an Onkyo 7030 and then finding a nice way to hook up my laptop to vintage...
  13. K

    Looking for help

    setting up my Audio Technical AT-LP60 with my Onkyo TX-NR616. It worked first time setting it up but now every time I turn it on I have to fool around with it (I have no idea what I'm doing) before it starts to work. At first I thought I had my input that my turntable plugged into set on Whole...
  14. Wesley14

    Need helping finding a receiver

    Help me find a receiver I want: Phono, tape, at least two aux inputs THD < .5% SNR > 85dB And > 50 watts (my receiver rn is 100w) Also if it had VU meters that would be a plus Price isn't too important as long as it's below or around the $500 range, I can save up and look around for best deals
    • Wesley14
    • Thread
    • marantz onkyo pioneer receiver technics
    • Replies: 12
    • Forum: Solid State
  15. Wesley14

    Tschnics SA-EX110 vs Onkyo TX-15

    Which would be better? I know, spec-wise the Onkyo looks to be better but it doesn't have as many inputs (I need one for a CD player too).
  16. R

    Onkyo tx-6500 mkII needs some repairs

    Hey, new to all this but I've had this tuner since 88' and I absolutely love it. But now it's not working properly, audio quits after a few seconds of being on, I would like to Do a restore but I'm lucky I got dressed this morning so I don't wanna make his super complicated. I'd like to get some...
    • Rookum
    • Thread
    • onkyo repair help vintage
    • Replies: 27
    • Forum: DIY
  17. J

    Polk Audio Monitor 7 vs 10

    I'm looking to upgrade my speakers a little bit from my current "ok" but cheap Technics sb 2665 speakers to something a bit nicer. I'm currently trying to decide between a pair of Polk Monitor 7b's or a pair of Polk Monitor 10a's, both are similarly priced and appear to be in good working...
    • Jaocb
    • Thread
    • marantz onkyo polk polk 10 polk 7b polk audio speakers speakers - suggestion technics
    • Replies: 29
    • Forum: Speakers
  18. K

    Onkyo C-707CHX CD Changer - Drawer will not open - SOLVED

    For several years I have been trying to trouble-shoot the Onkyo C-707CHX 3-disc changer. It is regularly offered on the Bay and elsewhere in seemingly good condition, except the drawer will not open. Motor and other noises can be heard, but it just won’t open. On a couple I found that the...
  19. ChefE

    Help! What's this inside Onkyo TX-DS797 with pulsating output.

    Hello. From GW I got an Onkyo tx-ds797 a/v receiver. Came home and cleaned it inside and out, then hooked it up with some sources and speakers. I got sound by "direct" only. Otherwise sound output on all channels from analog or digital sources yielded a intense rapid pulsating sound- not high or...
    • ChefE
    • Thread
    • help issues onkyo tx-ds797
    • Replies: 6
    • Forum: Solid State
  20. Q

    Hooking up main AND remote speakers

    Hey yall, So I have this kinda old Onkyo tx-904 av receiver. It has 2 sets of speakers it can output to: 2 main and 2 remote. On the back it says: "Main: 4 Ohm min/speaker" and "Remote: 8 Ohm min/speaker" I have 2 4 Ohm speakers and 2 8 Ohm speakers. However, for each speaker (both 4 and 8...
    • qwertygnu
    • Thread
    • impedance onkyo onkyo tx-904 remote speakers speakers
    • Replies: 6
    • Forum: Speakers
  21. LoudInTn

    Yard sale find today! Need some info and advice please

    Found a pair of Ohm Walsh2 speakers at a yard sale today with an onkyo a65 receiver for 45 bucks. I'm not at all familiar with these speakers and I'd Like to know what sounds good on them, any personal experiences, proper power, if they're junk, etc. They were covered with duck dynasty stickers...
  22. Burner

    HELP. Onkyo 2900/2090 problem. Part needed...

    As mentioned in the title I have a problem with my newly acquired Onkyo 2900/2090. The person that does all the repairs and maintanance on my audio equipment says that Left/right rec calibration potentiometers need to be replaced. The worst part about them is they're push in/push out type and...
    • Burner
    • Thread
    • 2090 2900 deck onkyo tape
    • Replies: 1
    • Forum: Tape
  23. smokevinyl

    Turntable setup w/ SONY TA-1120A! HELP.

    Hey everyone, first post here. I'll make it short. First and foremost, I am a Hi-Fi noob. 5 years ago I got into vinyl and I'm trying to make the push for a better setup. I acquired a good condition Sony TA-1120A at a content sale for what I thought was a steal ($120 CAD) Now I want to...
  24. ajmich

    Net Music Server Issue with Onkyo TX-NR656 Receiver

    Recently picked up this unit and am generally very pleased, but not familiar with how these units use home networking for music sharing. The sharing works well, but the displayed information for an album is sorted by song title alphabetically, instead of sorting by TRACK number. My clunky...
  25. CZ4A

    Experiences with upgrading M93E cart with M91E stylus

    I just received a spare headshell for my Onkyo CP-1015A. It came with a Shure M93E cart and stylus mounted up, but the cantilever is twisted so the stylus is pointed at an angle. The cart appears to still be working - I tested it with a multimeter and loaded it to the tonearm and wiggled the...
    • CZ4A
    • Thread
    • onkyo shure m93e
    • Replies: 12
    • Forum: Turntables
Back
Top Bottom