• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

onkyo

  1. cscottrun4it

    The Rare Onkyo DX-701?

    Has anyone got the slightest notion about this player? It looks like it was made in 1995. It may or may not accommodate 2 disks. (Really?) According to Radiomuseum.com, it has a write capability? (That seems far fetched.) Onkyo made a DX-700, which did not have an optical connect, and a...
  2. B

    Onkyo TX-2500 MKi

    I got a TX-2500 mki and I’m using the tape input to plug in my iPhone. I realized that when I press tape one or tape two buttons, the audio from whatever is selected on the selector knob (phono, fm or am) is still playing but very very softly. I can even hear it during soft passages of music...
  3. SmetMarc

    Onkyo M508 or M5090

    I'm looking in buying one of these big VU amps. I found both of them but not sure which would be the best choice. Can anyone give me some recommendations so I can make the right choice?
  4. B

    Onkyo TX-2500

    Just ordered a beautiful Onkyo TX-2500 receiver (mki version) to use with my sansui sp-30 speakers. It’s been fully serviced and tested, with upgraded LED lights too. I’m not a huge fan of LEDs but they used the warm tone ones that are more accurate to the original colors - and I dig not having...
    • bambino
    • Thread
    • onkyo onkyo tx-2500 vintage receiver
    • Replies: 3
    • Forum: Solid State
  5. B

    Vintage receivers (Onkyo...)

    I’m thinking of looking for an Onkyo TX 2500 to match with my Sansui sp-30 speaker’s and U Turn turntable. I’ve noticed they’re only inputs are AM, FM and phono. Is there any way to connect an aux input to these to use CD tape or Bluetooth input? If not, what other affordable vintage...
    • bambino
    • Thread
    • aux input bluetooth onkyo sansui vintage vintage receiver
    • Replies: 17
    • Forum: Solid State
  6. J

    Hi I’m new! Onkyo turntable help.

    Hi there. My name is Jeremy. I’m from Australia and I just bought a old Onkyo system from the 70’s. It is absolutely fantastic and runs like a dream. However the turn table seems to be running a bit slow like it has dropped in pitch. Almost a semitone. Anyway I have a few questions and I’m...
    • Jeremy Costa
    • Thread
    • 70's turntable onkyo onkyo turntable turntable speed adjust vintage onkyo
    • Replies: 15
    • Forum: Turntables
  7. J

    Onkyo Integra 927 Integrated Amplifier!

    Just picked one of these up. It is a 100 watt, Japanese import amplifier with a champagne faceplate and solid wood cabinet. Aside from that, this is all I know. What are your thoughts?
    • jblkef92
    • Thread
    • 1997 champagne integra integrated japan import onkyo
    • Replies: 4
    • Forum: Solid State
  8. C

    Onkyo TX-NR709 Main OUT HDMI Repair (Got Sound, No Picture)

    Hello all, As the title states I have an Onkyo TX-NR709 AV Receiver which has audio but no video on the Main OUT (ARC) HDMI port. This problem started a few weeks ago when one day all of a sudden I turned it on and it just had no video, I thought it was a bad HDMI cable so I tested the cable...
    • Cama
    • Thread
    • hdmi issue no picture got sound onkyo onkyo receiver onkyo receiver tx-nr709 receiver
    • Replies: 31
    • Forum: Home Theater & Video
  9. oldboats

    Twin Cities, MN

    No affiliation, might (???) be worth looking into. I am not travelling that far. Lists Kenwood, Onkyo. https://minneapolis.craigslist.org/wsh/gms/d/cottage-grove-moving-estate-sale/6977468286.html
  10. Kirkstall

    Onkyo A-10 or should I go modern?

    Hi all, First time poster, long time lurker. Found a lovely Onkyo A-10 for sale near me. Its around £600. I have just purchased a pair of ATC SCM7s (v1), and I own some Kef 105.2s which are my daily drivers. I was thinking of pairing the Onkyo with them. I've spent a lot of time reading and...
  11. ariv

    Onkyo CP-1260F auto return issue

    Hello folks, I recently purchased the above TT and everything but the auto return function works. I followed the instructions in the service manual to help fix it by setting the voltage and using the screw to set the range but nothing, although at times, if I move the tone arm back and forth...
  12. B

    Could use a bit of help with a Onkyo A-5

    Hello, I am currently trying to fix my fathers old Onkyo A-5 Integrated Amp. It would not start up or give any inclination that power was going through it, so I spent the past few days trying to figure out why when I discovered it was an issue with the thermal fuse in the power transformer...
    • brandysparts
    • Thread
    • diy repair intergrated amps onkyo vinatge
    • Replies: 13
    • Forum: DIY
  13. C

    Onkyo CR-445 - subwoofer?

    My very own mini stereo system the Onkyo CR-445, which is not a set of of headphones or computer speakers. I know. First of all, it was a cheap system that puts out enough wattage and the sound is good enough for the small room I have to fill it without it involving the neighbors making a noise...
    • Chrysalis700
    • Thread
    • cs-445 onkyo speaker advice sub woofer
    • Replies: 1
    • Forum: Speakers
  14. F

    A/V Receiver/Issue

    Hi all, I recently upgraded pretty much everything in my a/v set up; new tv, a/v receiver, etc., and I’ve been having a weird issue with my tv/ receiver. Right now, I have an Onkyo TX-NR676 with Monster brand HDMI cables running into a TCL 6 series 55” UHD tv. Now, it works just fine 98% of the...
  15. Homer4beer

    Onkyo TX-NR809 Amp - was working fine now no sound (relay click)

    Hi guys, I've had this amp for a number of years and never had an issue. Recently sometimes upon powering up the relay wouldn't click and hence no sound output. Turning it off and on again would fix it. Then it became progressively worse. Once it was on and I had sound, the sound would stop...
  16. J

    Need some help / advise please ...

    ANY HELP or GUIDANCE would be greatly appreciated - - My Onkyo 4500 MK II made a popping noise and I saw smoke. I took it apart and found the left channel was damaged - R518 smoked and R520 cracked open ( see attached file ) - I found that Q506 and Q506 are shorted E to C and R522 OPEN - I...
    • Juicer
    • Thread
    • help onkyo repair
    • Replies: 5
    • Forum: DIY
  17. U

    Is dust a hazard Open faced receivers ?

    Anything you can use to protect the top from evil dust bunnies ? Without causing onkyo to overheat? Is dust a component killing hazard??? Please post your opinions I’m clueless how much dust amps can suck up .
  18. SeanOnkFan

    A-300 Emotiva Amp - connection to entry level stereo - is this possible

    I have an Onkyo TX-SR353 https://www.onkyousa.com/Products/model.php?m=TX-SR353&class=Receiver I am hoping to connect to an emotiva amp - The A-300 - If I had the coin the XPA-2 3rd Gen would be my choice https://emotiva.com/collections/amps/products/a-300 As an entry-level guy I need a bit...
  19. CDB76

    Integrated Amp advice for beginner

    So I've rediscovered a love for vinyl after inheriting my old man's record collection about a year ago. I pieced together a starter system with very limited budget, and now I'm working to upgrade. I began with a Yamaha YP-D4 (Stanton 681eee), Technics su-v8x, and Cerwin Vega D-5's. I switched...
  20. U

    Klipsch icon brightness & lowering the treble

    I have a onkyo818 , it has a built in equalizer that audysee does not seem to use . Is there anyway to lower the top end output of the speakers ? With or without equalizer Even with earplugs my left ear still hurts , and when I had s friend over he musta had bad hearing because sound was up...
  21. B

    Any Onkyo TX-890 owners out there?

    Any TX-890 owners out there? I have one that in my opinion idles much hotter than all my other Onkyo gear. I recently bought it (used) so I couldn't gauge it's historic operation. The heat is mostly in the front/middle around the heat sink, not the power transformer. I can touch the top of the...
  22. Dncg4charlie

    Onkyo or Yamaha?

    Hi All, I’ve been rocking an Onkyo TX-SR313 (low-end from 2012) into EV FR12-2 loudspeakers for years. My girlfriend’s dad is offering his 1982 Yamaha A-760. The specs seem close enough that I don’t know if my discerning ears would hear the difference. I don’t have a lot of listening experience...
  23. buckeye56

    Stereo receiver, Onkyo

    I needed a replacement for my 1982 Technics receiver, as one of the speaker plugs is dead and no sound emits from any speaker plugged into it. I ordered an Onkyo 8220 and it arrived yesterday. Sooooo disappointed. It's gigantic and takes up too much space. Haven't even bothered to set it up...
  24. BobGAL

    New Guy to AudioKarma outta Flint, Michigan.

    Hello to all you audiophiles out here. I'm a new member to the group and this is my first posting. I have been very slowly getting back into the audio gear collecting. The first audio gear I ever owned was a decent sized boombox back in the early '80s. After I got out on my own I purchased an...
  25. C

    Audio-Technica AT-LP120-USB Troubleshooting - new turntable is playing at only 30% volume

    Newbie here. I would appreciate your help. I'm having trouble with low volume on my turntable. Today I purchased the AT-LP120-USB turntable and I'm new to vinyl. For years now I have used my iPad plugged into my old Onkyo receiver and it plays at very loud and crisp. I carefully assembled my...
    • caffeine19
    • Thread
    • at-lp120-usb audio-technica low volume onkyo setup turntable
    • Replies: 4
    • Forum: Turntables
Back
Top Bottom