• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

scott

  1. James Cox

    Scott 340b powerswitch

    Hi, i have a scott 340b that needs the power switch replaced. I found a switchcraft spdt switch but wanted to double check that it would work for my needs. Its rated at 125v but that seems low for a powerswitch. Will this work? If not what ratings should i be looking for on the switch? Also...
    • James Cox
    • Thread
    • 340b powerswitch restoration scott switchcraft tubes
    • Replies: 10
    • Forum: Tube Audio
  2. rickl

    My new HH Scott 299

    I picked up a Scott 299 recently. Missing all 12ax7 tubes, one 7189 and a 5AR4 tube. Looks like it is a 299; not a A, B, C, or D. Serial number 40812. I did find some NOS 6BL8 tubes in my stash. I plan to clean it up, replace or bypass the PS caps, add fresh coupling caps and get it...
  3. zelgy1

    HH Scott 357 Documentation Request

    Hi all! I have acquired an HH Scott 357 (not 357B or R357) and I'm struggling to find any documentation for this unit. I would love to get a downloadable Operator and Service Manual. If anyone has a connection to either, I'd appreciate the chance of acquiring. Thanks in advance!
  4. TV John

    Proper Name for Type of Resistors

    Can anyone tell me the proper name for the resistors I've attached a photo of (R1, R101, R4, R104)? I think they are some type of wire wound and perhaps used for protecting circuitry? They go to the Emitter circuit for the Audio Output transistors on a H. H. Scott 367 Receiver, Circa 1971/2...
    • TV John
    • Thread
    • h. h. scott resistors scott stereomaster 367
    • Replies: 15
    • Forum: Solid State
  5. Zack Sainz

    Scott 299B Blown Fuse

    Hello all! I love my Scott Amp, it sounds so good and was working perfectly for a year. A few months ago the fuse blew. It was a quick blo fuse so I tried another as I thought maybe it was a bad fuse, but same results. I let it chill for awhile. Now since I have time I thought I’d look into it...
    • Zack Sainz
    • Thread
    • fuse blow issues power scott scott 299b tube amp
    • Replies: 17
    • Forum: Tube Audio
  6. R

    Fisher KX-100 vs. Scott LK-48 + speaker recs

    Hi, i'm pretty new to hifi/audio in general. I sold 2 SL-1200s last year and have been thinking about what I want my new setup to be. I'm partial to vintage gear and I always loved the sound of my dad's tube amps growing up, so I'm leaning heavily towards starting with an integrated tube amp and...
    • robind
    • Thread
    • fisher jbl studio 570 kx100 lk48 scott
    • Replies: 5
    • Forum: Tube Audio
  7. AnalogBrad

    Scott woofer manufacturer

    I have these baffles remaining from a Scott console. Any ideas on who manufactured the Scott labeled woofers?
  8. Lauren H

    Polk SDA 2A with Scott LK 48 Amp

    I recently purchased a Scottkit LK 48 and I wanted to make sure I can use it with my Polk SDA 2A's. I am pretty sure I can but would there be any downfalls?
    • Lauren H
    • Thread
    • polk polk sda 2 scott scott lk 48 speaker advice tube amp
    • Replies: 11
    • Forum: Speakers
  9. Lauren H

    Scottkit LK 48 with Polk Audio SDA 2A

    Hello, I recently purchased a Scottkit LK 48 and I wanted to make sure I can use it with my Polk SDA 2A's. I am pretty sure I can but would there be any downfalls? Thanks!
    • Lauren H
    • Thread
    • lk-48 polk polk sda 2 scott scott lk 48 scottkit sda 2a tube amp
    • Replies: 22
    • Forum: Tube Audio
  10. Wray & Ting

    HH Scott Pro 100 vs Realistic Mach Two

    I have two pairs of vintage 15" floor speakers I picked up on the cheap, but each with issues - a pair of 1976 HH Scott Pro 100 (non-original woofers (!), no grilles) and more recently a pair of 1984 Realistic Mach Two (very nice shape but needed refoam of woofers and mids). I hooked them both...
  11. F

    My Scott LK-72 Restoration -LONG Journey But Not There Yet

    Back around 1995 I saw a "Free" post in HP's internal ads for a Scott LK-72. Luckily I was the first to claim it (a gold-face, neatly built unit, in mostly pristine condition). It came with original instruction book and a note saying one of the 0.1 uf was leaking and needed replacement. As...
    • fredi898
    • Thread
    • balance bias adjustment lk-72 restoration scott
    • Replies: 39
    • Forum: Tube Audio
  12. allhartfidelity

    Fisher 500b component query

    Hello all, please bare with the intro, i do get to the question later down the post. Having recently acquired a 500b, ive gone over it a little. It has a very dark gold plate, lettering and chasis beautiful, stock tubes testing ex. Orig lights still working, pulled from a console and its clear...
    • allhartfidelity
    • Thread
    • eico fisher amplifier mullard scott telefunken
    • Replies: 11
    • Forum: Fisher
  13. Zack Sainz

    Scott 299B & Headphones

    Hey all, Still new to this world, so thank you in advance for any insight. I have a Scott 299B with some later production KLH 6s. It’s incredible. I would love to be able to use headphones, mostly for night use. I saw this article...
    • Zack Sainz
    • Thread
    • amp headphones pioneer safety scott tube
    • Replies: 11
    • Forum: Tube Audio
  14. Bertbranson

    Scott PS 87 question.

    Just a quick question. I've got a Scott PS 87 turntable and it's missing the original dustcover and finding the PS 87 replacement has been nearly impossible. My question is, can another Scott turntable dustcover (67, etc) be used? I seem to be able to find some models easier than others. This...
  15. D

    Scott 670D idlers !!!

    Hi all, I was about to change 2 belts on a Scott 670D when i discovered that some parts called « idlers » were completely destroyed. So i have to replace them too. I have the Service Manual of the 670D. But none information appear about those 2 idlers : size etc. A picture : The Tape Deck...
    • Dowhiteblack
    • Thread
    • 670d deck idler scott tape
    • Replies: 3
    • Forum: Tape
  16. D

    Hi there...

    Jules, from Paris. I’m interested in Scott mid-70 amps, tuner, tapes decks and others analyzers. I will post my installation in the concerning thread. Thanks to all,
  17. P

    Pioneer vs HH Scott

    I have a set of KLH Model 5s and found a refurbished Pioneer SX636 ($250, Deoxit, Faderlube, and 8 new transistors) and a clean HH Scott 370R ($225, Deoxit and Faderlube). I want to pull the trigger on one but would like to hear your guys' feedback? The HH Scott has more power but the KLH really...
  18. vaathi

    Scott 399c with wood case in vintage condition

    My Scott 399c looks ugly as hell in nude. I have seen them transform in a elegant beauty when paired with original wood case. So I am always on the look out for original wood cabinet for my 399 for a while now. As part of my auction site ritual, I was checking for wood case for my 399c and I saw...
    • vaathi
    • Thread
    • amplifier scott scott 399c tube vintage wood cabinet
    • Replies: 13
    • Forum: Tube Audio
  19. jeff's eight

    HH Scott 340a tube receiver Overhaul

    My folks have a cosmetically nearly perfect 340a that does not operate. Now sitting 1500 miles away. My brother can bring it down next month. I have plans to give it to a local audio guru. He says that in order to do a complete check, I will need to plan on replacing the following: -Selenium...
  20. MadcapLaughs

    Wharfedale W90's (should they replace my Altecs???)

    Hey I I have a chance to pick up a pair of ealry edition Wharfedale w90s for about $400 this weekend and I have to make a decision fast. I'm currently running Altec 890c Bolero horn speakers with a scott LK 72 tube amp (35wpc)...is this a worthy upgrade in anyone's opinion? I know that the...
  21. ScottFan355

    Need Help With a Scott 208!

    Hello all! Let me say thanks to anyone who responds in advance! So let me start by saying that I know squat about electronics though I have started doing some reading. My only hands-on electronic experience is putting together a kit or two from radio shack when I was a kid. Now that we've...
  22. S

    Parts for Vintage Scott Receiver

    Love this site and all of the solid state information. I have a Scott 337R receiver that I purchased new in 1978-1979. It is still in great condition and works just like it did when I first used it. It is missing one of the black pieces on one of the front switches, needs a new bracket for...
  23. MadcapLaughs

    Scott LK 72 vs Accuphase E 202 integrated amp

    Please can I have some quick advice on which unit I should buy? They are both comepletely restored and in excellent shape...I'm buying one or the other today and I'm really on the fence for Classic hi end Accuphase solid state or going the tube route. Help me Rhonda!
  24. billyz

    Anyone ever bypass the Scott PEC filter 299 ?

    Not even sure what it does , is it part of the Scott Dynaural filter ? Does the Scott 233/299 series have a subsonic filter ? As in a fixed filter. The reason I ask is, I am rebuilding a Scott 233 and the line stage is very dynamic and full sounding, but the phono stage is lackluster and the...
    • billyz
    • Thread
    • 233 299 299c 299d scott
    • Replies: 7
    • Forum: Tube Audio
  25. billyz

    HH SCOTT 233 rebuild

    I just took possession of a very nice Scott 233, completely original as far as I could tell. I ran it up on a variac to 117vac , did a few voltage checks and set the bias and balance. Sounded pretty good a bit muddy and blurry and hum. I played it awhile anyway to get a good feel for it. Next I...
    • billyz
    • Thread
    • 299 299c 299d 7591 lk-72 polystyrene recap recapping scott
    • Replies: 32
    • Forum: Tube Audio
Back
Top Bottom