• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

yamaha

  1. T

    7.1.4 Dual Receiver Config

    Hello All, I have a Denon x3700h and an older Yamaha v2095 receiver that I want to use for my 7.1.4 setup. My Speakers: 2x Fronts: 4ohm (Emotiva T0+) 1x Center: 4 ohm (Emotiva (C2+) 2x Rear: 8 ohm (Emotiva E2+) 2x L/R Surrounds: 8ohm (Emotiva E2+) 4x Heights: 8ohm (Sonance MAG6R) The Denon...
  2. H

    Yamaha A1 - quality assesment of the pre amp - comments please

    I have the opportunity to purchase a Yamaha A1 integrated amp at a low price and am happy to service it myself. I intend to use only it’s pre section teamed up with a my recapped Yamaha P2200. Please could anyone comment on the quality of the A1’s pre amp? I hear that the phono section is very...
  3. F

    Adding Pre-out/Main in to Yamaha CR-820

    I'm planning to add a subwoofer to my setup and am wanting to add a pre-out/main-in RCA connection to my receiver. After studying the schematic I think I've found the best place to make this addition but wanted to see if anyone else has done this before and if what I'm thinking of doing is the...
  4. A

    Yamaha C2X DC at output

    Hi, I have a C2X that I absolutely love, but I have a problem in that there is DC present on the right channel. While it is playing at a steady volume it's a negligible amount, but when I turn the volume up or down fast it puts out enough DC that it causes my amplifier to shut off. Also when...
  5. T

    Direct drive servo recordplayer issues.

    For reference the record player is a yamaha yp d4 I have this record player that works but has a few issues. The two main ones being that it spins at the correct speeds but it slowly speeds up over time. And also that unless I turn the internal potentio meter all the way up for 33 rpm it just...
  6. R

    Yamaha C-80 DC offset adjustment

    Hello Yamaha Fans! I'm using my C80 preamp a lot more these days, and and after recapping it months ago, and using it everyday for the last month, I remembered that I never set the DC offset or the bias. I have the service manual I have a volt meter I've set bias and DC offset on other amps...
  7. JB8

    YAMAHA CR-420 Headphones Great! Speaker outs? Not so much...

    Keep it pithy! I'll try! Recently found unit in decent, yet very dirty shape. Pretty sure I'm the first person to poke around under the hood, started with cleaning, including DeoxIT, tightening chassis ground screws, exercising knobs, push buttons, polished the bright work as well - all of this...
  8. T

    Weird power issue on this yamaha tc 720?

    I have this yamaha tc 720 and apart from all the belts having turned to mush it has a weird issue. I can't really describe it so I made a video. It seems it loses and quickly regains power every second or so. Is this due to the belts not being there or is something else going on?
  9. T

    Help Troubleshooting TC-520

    Hey there! First time posting here, I was hoping someone could give me advice on troubleshooting an issue with my Yamaha TC-520. Here's a link to the video of what's going on: https://imgur.com/a/owkPYpv So basically, no sound, just a fluttering popping sound. Just got this, cleaned the...
  10. david winter

    C-70: mistake around zeners near T211/T212 ?

    Hello, I am repairing a nice C-70 pre. Between T211 ant T212 (symetrical sub-power), are two 27V zener diodes (D126 / D127). The glue used to stick the two 220/35 capacitors corroded both zeners and one had a broken leg. No reference is visible on them, so I took the schematic and realized that...
  11. Yamaha5000

    NISSEI NSK135 .033 + 120ohm

    Seeking a replacement option
  12. Muddywater31

    Yamaha mx1000u speaker issues

    Hey y'all! First time posting so I apologize for any errors. I recently found a complete set of Yamaha equipment at Goodwill and it’s all in pristine condition. I am using an MX1000u amp with a CX1000u preamp. My speakers are old Polk Audios that I’ve had forever. Now the issue: I am only...
  13. S

    Yamaha K-540 Capstan Motor

    Hello - Trying to fix a Yamaha K-540 and capstan motor is not working. Says Sankyo BFA2L21 70519-A took it apart but I think I made it worse! It's not a super expensive deck but does anyone have an idea on where to get a motor like this or any other suggestions?
  14. 201bk

    Yamaha A-960II phono recap

    Hi, So I'm looking for reasonably priced good capacitors. Since I started to revive my old Yammie. Found a tech willing to recap it a while back so now it's working on Kemet caps. And sounds really good and lively. Except phono stage since it just started acting up so I think it needs a...
  15. lJelal

    Yamaha PX-2 - Starting My Journey

    I have acquired a PX-2 which is in very good shape except the arm left / right movement was, of course, stalling. I flipped & reversed the arm belts. I also tried to add a bit more tension & grip by placing a rubber piece (see Motor Belts image) on the motor. The previous owner apparently...
  16. Yamaha5000

    Capacitor & Resistor Schedules used by Yamaha

    Has anyone created a translation list of the symbols used by Yamaha? There are many components that are called for that appear to be a "Mystery of the Universe" Sorry to say I have discovered many more along this line.
  17. F

    Anyone with Tos (optical) experience help me troubleshoot new Yamaha?

    I am new to TOS so I don't know it's quirks other than I have read it can be flakey do to differences in cables... So a new Yamaha N303 that I have been waiting on finally arrived last night and I really like it so far except the optical input is not working. I have tried 2 different sources...
  18. Kemu

    Is silver colored Yamaha PF-50 rare?

    I got this pristine quality silver Yamaha PF-50 for 25€ but i have only seen pictures online in black. Is my turntable rare or is there other reasons i don't see silver ones anywhere ere online?
  19. L

    Name this mystery receiver....

    Can any one of you geniuses ID this one for me? :-)
  20. G

    CR-450 lives again

    The past weeks I spent quite some spare hours in the insides of this Yamaha CR-450. The machine was put into storage some years ago with a blown left channel. Because of other priorities I forgot about it until I was clearing out my garage en saw it again. What to do: get rid of it or... try and...
  21. guac

    Another A-700 repair thread

    So, I recently bought a Yamaha A-700 amp, without any prior experience in the field. It worked fine until a few days ago. Without knowing any better I put my record player on top of the amp, with the intention of putting risers below it some time later, well its too late now I guess. Hindsight...
  22. N

    Help identifying cartridge in Yamaha TT

    I recently picked up my first turntable, a Yamaha P-200, for cheap from goodwill. I already replaced a missing belt and hinge and was planning on replacing either the stylus or the full cartridge depending on condition but I can't find any information about this cartridge. I found the P-220 on...
  23. Kalliman

    Yamaha A-420 with Paradigm 3se's.

    Hello, Completely new to this world so be gentle. Had an original pair of Paradigm 3se's sitting around and found what I hope will be a fully functional Yamaha A-460. Will be adding a Yamaha Dvd-s550 as one source, and a BT unit for my digital music. For the Paradigm 3se's, given the...
  24. Yamaha5000

    Equipment Restoration Recover Finishes

    Seeking advice on matching paint colors and method of application. For instance a Yamaha P-850 Turntable. Front panel anodize and silk screen. DIY or Hire it to be done? For instance Yamaha CR, CA, M, MX, CX series of equipment.
  25. W

    Yamaha P2200 professional series power amp

    Hi all I'm a newbie but live my vintage audio , I have had some highish quality stuff in the past ( example krix series 2 neuphonics running a big Dennon amplifier and a d class 1000 W Rotel power amp also coupled with a set of klipsh rp 280f floor standing and a big paradigm sub ) but I found...
Back
Top Bottom