bulbs
-
Vintage Sansui 771 Stereo Receiver Lights No Power
Hey guys, I wanted to ask a question and hopefully someone can help me. I have had a beautiful vintage Sansui 771 stereo receiver for many years now. It plays and looks great. All of the lights on the front panel were working but one of them would go out after it was powered on awhile. I decided...- Bburdette
- Thread
- 771 bulbs lights not working receiver replacement sansui
- Replies: 5
- Forum: Exclusively Sansui
-
Replacing 2 diodes/bulbs in my CT-710 Yamaha
The two bulbs in the FM quality windows went out and I'd like to replace them. (FM radio has been shut off in my country, but I'm using the CT-710 as a decorative piece now) This is my beauty the bulbs in question: 4mm in diameter, fitting straight into those rubber rings above... -
H
Yamaha CR1020 lights have stopped lighting up on the three meters
Hi everyone. CR1020 continues to work beautifully after service and recap but the three light on the meter displays have recently stopped lighting up - I think simultaneously - although they had been working just fine. So where should I look first? Easy to say "replace the bulbs" but the fact...- Hifibythekg
- Thread
- bulbs cr1020 meter yamaha
- Replies: 8
- Forum: Yamaha
-
J
McIntosh MC2505 Bulb Specifications??
Does anyone know the exact bulbs required to make a MC2505 glow like new? I’m looking to replace all of them. thank you!- jgduck
- Thread
- bulbs mcinstosh power amp poweramp
- Replies: 1
- Forum: Solid State
-
J
McIntosh MR74 Lights/Bulbs specifications??
I recently purchased a McIntosh Mr 74 and wanted to replace the lights. I believe this unit has 7 or 8 lights? Not sure but regardless I was hoping someone could tell me which exact bulbs I should buy to get this thing glowing again? I’d greatly appreciate it! I also need the same information...- jgduck
- Thread
- bulbs mcintosh tuner
- Replies: 0
- Forum: Solid State
-
What lamps (and sockets) for Pioneer tuner TX-5500 II?
I got myself a Pioneer tuner TX-5500 II that works fine but there is no background light on the front panel, so I opened it and found no lamps, no sockets, and wires cut! Consulting Google it seems that the lamp type is called 194 (?) But what does the socket look like? Should I put them in... -
Seeking Help from Sansui Model 800 owners -- bulb wiring questions
Hey all! Are there any other Sansui Model 800 owners out there? I'm working on restoring one, and a previous owner really mucked up the light bulb wiring (and apparently threw away both metal shrouds that covered the bulb assembly). Could anyone open theirs up, and share some photos of the stock...- pumablues
- Thread
- bulbs sansui sansui 800 sansui model 800
- Replies: 0
- Forum: Exclusively Sansui
-
S
Sansui tuner lights out
I recently purchased a Sansui 4000. I’ll start by saying that I’ve owned a few high end modern and vintage receivers in my life and this one is by far the warmest and musical components I’ve come across to date. Hard to describe but the sound is full and thick… love it. But that’s not why I’m...- schwartztodd
- Thread
- bulbs sansui 4000
- Replies: 7
- Forum: Exclusively Sansui
-
K
Marantz 2330B LED Light Kit
I've been looking all over at kits for my recently acquired 2330B. I've been running it for about a week now without any issues except a few bulbs behind the tuner dial is out. Looking at options all over the place and I'm not sure what to buy. Anyone have recommendations?- KyleOetken
- Thread
- 2330b bulbs led conversion marantz
- Replies: 4
- Forum: Marantz Audio
-
Technics SE-TX100 right/left channel operation indicator bulbs
I hope I'm in the right section for someone to see my request for specs for the bulbs for right/left channel operation indicator bulbs in Technics SE-TX100 dual mono amp. I have three of these amps and only two of the six bulbs are working. I looked for a service manual on HiFi-engine but no...- letsfixit!
- Thread
- bulbs technics
- Replies: 0
- Forum: DIY
-
Yamaha A1 Change from Bulbs to LED
Hi: Can a knowledgeable member please share with me where to order, and the exact parts numbers, for the two green and one white LED lights to replace existing bulbs in a Yamaha A1? I want to do it myself, and this is a first ever repair attempt. Any watch outs for this repair regarding specs... -
S
Help Finding Replacement Bulbs Re: Zenith SS Record Console
Hey everybody... I inherited a late 70s/early 80s Zenith turntable/8 track console in outstanding condition. I already rebuilt and tuned up the BSR. 8 track works like a champ. Not the highest end model by any means but my 12 year old daughter got introduced to vintage vinyl and she's obsessed...- scupbucket
- Thread
- 8 track bulbs console record solid state stereo zenith
- Replies: 17
- Forum: Solid State
-
Sansui 5000x Restore Questions (bulb replacement and push button)
Good day all! I'm on to my next project, restoring a Sansui 5000x. I have searched many sites, including this one, for answers and I can't seem to find what I am looking for. First, my unit has the fuse style lamps. Is it easiest to replace by removing the tuner glass panel or replacing...- zelgy1
- Thread
- 5000x bulbs lamps
- Replies: 18
- Forum: Exclusively Sansui
-
Yamaha CR-1040 - New Bulb Fast Burnout - LED Too "Help"
I have tried several LED and Incandescent bulb replacements on my Yamaha 2040 Meters and all burn out in a few days. The LED's resistors overheat and burn out and the incandescent simply but out. After watching some vids, it seems that the current is 29 to 30 volts? Does this suggest a problem...- badspell68
- Thread
- 2040 bulbs led short yamaha
- Replies: 13
- Forum: Solid State
-
Marantz 250m lamps
Hey, so I recently aquired a 250M for a decent price online, it arrived, allegedly serviced, but with terribly dark blue LEDs installed. I want to swap back over to incandescent, or at the very least warm white LEDs, but my question is, how do you get to the bulbs in this model? I see all kinds...- goldswimmerb
- Thread
- bulbs marantz 250m restoration
- Replies: 3
- Forum: Marantz Audio
-
CT-800 Lamp Modifications
Hi all, I recently picked up a CT-800 for a whopping $30 in what I'd call fantastic condition. The lamps are out, which didn't surprise me for a 40+ year old model, and I've ordered replacements to bring the tuner back to life at night. Upon receiving I tore the unit down and did a deep clean... -
T
MC502 panel lamps
Looking for advice on my MC502 panel lighting. The amp came with #8610 lamps (rated 6.3v). Each of the five is swaged into a steel ferrule with two long-ish insulated wires coming out. The wires are soldered at the other end. Thus, the lamps are not socketed, and of course are not available...- Thoan
- Thread
- bulbs lamps led lighting
- Replies: 4
- Forum: McIntosh Audio
-
B
Fisher 500 Mono Bulbs & Knob
Hi, I"m working on restoring a The Fisher 500 mono tube receiver and there are a few bulbs in the front panel that look like fuses that are not working. Does anyone know where to find replacement bulbs? and It's also missing a knob, any leads? thanks! -
Harman/Kardon 930 : dial won't light, bulbs ok
Hi, Recently acquired this receiver. I can't seem to figure out why the dial scale on this 930 won't light up, despite the fact that all the bulbs are testing ok. It takes qty. of 7, 6.3v 250ma fuse-type bulbs, all testing fine. Anyone know this unit really well and/or had this problem...- davstev
- Thread
- 930 bulbs dial h/k harman harman kardon harman kardon 930 kardon lights
- Replies: 57
- Forum: Solid State
-
Lights for Yamaha CA-810
I need some bulbs for my Yamaha CA-810 Amp, I bought some awhile back but can't remember the website of the guy who sold them, can anyone Help? Thanks- YachtRocker
- Thread
- bulbs
- Replies: 4
- Forum: Solid State
-
Sherwood S-7100A Illumination
While I had my Sherwood S-7100A opened up for some other maintenance, I thought I'd look into why the illumination of the scale looks so dull and lifeless. Here's what I found: As you can see, there is quite a bit of carbon build up inside the fuse lamps. Not a big deal. They are...- MCM_Fan
- Thread
- bulbs lamps led lamps leds sherwood s-7100a
- Replies: 19
- Forum: Solid State
-
M
PIONEER SX-434 LIGHTS
Hey there - new to this forum.... When I first owned this receiver, one of the fuse bulbs lit part of the fm/am frequency display. Yesterday I replaced all five fuse bulbs and fm/am pointer bulb and went to turn the receiver on thinking this would do the trick, and none of the lights turn on...- macky123
- Thread
- 434 bulbs pioneer sx434
- Replies: 2
- Forum: Pioneer Audio
-
Help Identifying Diode on Sharp SA 306
Hello everyone, my name is Peter. Before I continue, I just gotta say you guys have a lovely community. I've been reading up on this site for a while until now I decided to register. You guys have lovely recievers too!! OMG! I mean I thought mine was the bomb until I saw some others. Looking...- dlPeter
- Thread
- bulbs replace dial lamps
- Replies: 8
- Forum: Solid State
-
SX-450 Receiver power/dial lamps flickering
Hi all, A while ago I've replaced all the 3 dial lamps, plus the power and stereo indicator ones on my SX-450 Receiver. It went good for a long time, but now everytime I switch it on, for a few seconds the power indicator kinda flickers and the whole dial is dimmed. This comes with some sort of...- marini
- Thread
- bulbs lamps
- Replies: 3
- Forum: Pioneer Audio
-
Wire-to-PCB connector. Which one?
Hi all, I've been struggling with the task of "wrapping" a wire around a pin (jumper) on the PCB. You know, when you decide to replace a small bulb (lamp). It never gets firm enough, so it can become loose and bad things can happen inside the equipment. I thought about using some sort of end...
