• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

headshell

  1. M

    Humming - Thorens TP60 headshell with TP16 tonearm

    Hi there- I have a Thorens TD125 MKII with a TP16 tonearm and a TP60 headshell. The headshell is incredibly sensitive to producing a hum if I touch or install it the wrong way. I've removed and rescrewed it on multiple times. It's a crapshoot as to whether it'll hum once it's properly...
    • mre986
    • Thread
    • headshell thorens tp16mkii tonearm tp60
    • Replies: 2
    • Forum: Turntables
  2. kk_coastal

    Pioneer PL-41 - Headshell recommendation for Denon 103

    I have a Pioneer PL-41 turntable and have been researching cartridge options. After reading numerous reviews on AudioKarma, I've decided to invest in the Denon DL-103. However, I need advice on selecting an appropriate headshell. My understanding is that I should look for one weighing...
    • kk_coastal
    • Thread
    • denon 103 headshell pionerr pl-41 sansui au-x701 sansui alpha
    • Replies: 3
    • Forum: Pioneer Audio
  3. B

    Headshell repaired with glue - Effect on sound quality?

    I got a Dual 1229 which came with the headshell (not the sled) broken where it meets the tonearm. I was succesfully able to reattach it to the tonearm with super glue, and it seems to have held up. Anyways, I was wondering what effect this has on sound quality, as I never had the chance to hear...
  4. C

    Ortofon RMG212 Headshell / Counterweight Mass

    Hi ! I restored an Ortofon RMG212 and installed as per Ortofon specifications a 32g headshell. With the counterweight set to 0, my initial mass is already about 8g (it should be 0g), so I can't apply a 4g on the cartridge. Any recommendations?
    • cydest
    • Thread
    • headshell ortofon shure tonearm
    • Replies: 1
    • Forum: Turntables
  5. L

    Cartridge/stylus/headshell recommendations for technics SL-1700

    Hello friends, I’m relatively new to vintage audio and was recently gifted a Technics SL-1700 (original not mkii) in great condition. I’m hoping to get some advice for upgrading the cartridge/stylus and possibly the headshell. It came with an Audio Technica VM8 cartridge/stylus mounted on a...
    • Lulu N
    • Thread
    • at vm8 cartridge headshell reccomendations stylus technic sl 1700
    • Replies: 4
    • Forum: Turntables
  6. H

    Can’t get enough tracking force for cartridge?

    Hey all! A bit of a noob question here I’m sure. I’ve been collecting for a long time but only recently getting into the finer details of my setup. The turntable in question is a new-to-me Technics 1200M3D, and the cart is an Audio-Technica VM95E. The table came with a headshell that has a...
  7. A

    Dual 1019 Headshell Connector Plate

    I recently picked up a Dual 1019 and discovered the tonearm wiring was a mess. As I was in the process of replacing the wiring, I uncovered this connector plate which looks as if someone had previously worked on it. I was not able to find a replacement part online and was hoping someone could...
  8. Johnny P

    Denon DP-37F Headshell/Cartridge Replacement.

    I recently Purchased a Denon DP-37F Online not realizing its missing the entire headshell. (Rookie mistake i know) I read up on the manual online and it calls out for a Denon PCL-30BK Headshell replacement and DL-65 Cartridge i have looked everywhere online and can not find one in stock...
  9. Johnny P

    Denon DP-37F Headshell/ cartridge replacement

    I recently Purchased a Denon DP-37F Online not realizing its missing the entire headshell. (Rookie mistake i know) I read up on the manual i found online and it says it requires the Denon pcl 30bk headshell. And i can not find a match online ANYWHERE. It contains the Dynamic Servo Tracer...
    • Johnny P
    • Thread
    • denon dp-37f headshell replacement tonearm turntable
    • Replies: 1
    • Forum: Music Forums
  10. S

    Headshell + MM for Sony PS-X60

    I have been gifted the above table and have never owned one before. I already have a thread about the reconditioning I have done so far. It came without a counterweight or headshell. The counterweight looks possible to find, but I am lost when it comes to finding a suitable headshell and...
    • Sandysound
    • Thread
    • cartridge headshell moving magnet ps-x60 sony turntable
    • Replies: 0
    • Forum: Turntables
  11. adnick

    Alexey Korf post at Lencoheaven about tonearms

    Like many I’ve enjoyed reading the Korf blog and find their new headshell and tonearm intriguing. Each can be found here (no affiliation). http://korfaudio.com/#popup:timed Thought this was a very interesting reply to questions about the new Korf tonearm that were asked over at Lencoheaven...
    • adnick
    • Thread
    • cartiridge effective mass headshell tonearm tuntable
    • Replies: 123
    • Forum: Turntables
  12. bscepter

    Anyone tried this Audiosilente Thorens headshell replacement?

    It's being offered via eBay and looks a bit better (and more Thorens-like) than the Swiss one.
  13. C

    headshell recommendation with a PL-A450 + Ortofon Red

    Hi all, Novice listener here. I've been lurking and searching for advice to get a lovely vintage system off the ground. Just before COVID I found (in 3 separate transactions) a PL-A45D + SA-8100 + a pair of HPM 60's thanks to the great advice from a friend. I have a new Ortofon red that needs...
  14. Ron13a

    Are There Headshell Overhang Gauges with a Scale? Say, 45mm to 55mm?

    The reason I ask is that there are many Pioneer 49mm and Technics 52mm gauges available on the auction site. I have a SABA PSP 350 and it needs to be set at 46MM. Is there a gauge that has a scale on it so that it could be used universally? If not, is there a gauge from another turntable that...
    • Ron13a
    • Thread
    • gauge headshell overhang
    • Replies: 10
    • Forum: Turntables
  15. JStiks

    Mitsubishi LT 30 Wiring from headshell to RCA

    I’ve taken apart my Mitsubishi, added new headshell wiring etc… I don’t understand how it connects to the sound board… I see the left and right channel Caps… The schematic shows the ground and channel wires go to muting switch, then it looks like it goes to the RCA terminals. Another blue wire...
    • JStiks
    • Thread
    • headshell help lt-30 mitsubishi wiring
    • Replies: 17
    • Forum: Turntables
  16. G

    Best headshell for Grado Black?

    Hi all, I'm wondering if anyone has any opinions/advice about the best headshell for a Grado Black cartridge. I had it on a U-Turn Orbit TT, and it sounds wonderful, BUT I get some hum. So I wanted to try it on my old Pioneer PL-514. The headshell on that, though, is an old audio technica one...
    • gurdyp
    • Thread
    • cartridge grado headshell pioneer pl 514 turntable
    • Replies: 17
    • Forum: Turntables
  17. A

    Is my Technics tonearm 4 pins connectors damaged ?

    Hello, I’m new to the forum that i’m reading all the time to get some informations ! I’ve a question about an Technics SL-1200MK7 that i’m not using for DJing. Do removing headshell daily to clean my stylus can damage the 4 pins connector inside the tonearm ? I’m using the stock Technics...
    • Arthur92
    • Thread
    • connectors damaged headshell technics turntable
    • Replies: 2
    • Forum: Turntables
  18. sansui au719

    Fixing up a cheap Sansui FR-D25 Turntable

    I'm trying to fix up a Sansui FR-D25 that I picked up very cheaply. It's for my teenage son. Like many teens he finds old turntables fascinating and cool but it's more to have some fun than for serious music playing. Excuse my ignorance. I'm not and never have been a vinyl guy, having bought my...
    • sansui au719
    • Thread
    • cartridge compatible fr-d25 fr-d35 headshell replacement sansui stylus turntable
    • Replies: 2
    • Forum: Turntables
  19. S

    Tonearm lead blue wire snapped. How can I replace it?

    I was trying to remove a cartridge from a Panasonic SL H203 and when unplugging the wires i went too far on the blue one it snapped, is there a way to fix it? I'm okay with soldering, I have a multimeter and have like 30$ budget. The wires can be accessed from the bottom of the counterweight...
    • sabalennon
    • Thread
    • blue headshell panasonic solder tonearm wire
    • Replies: 5
    • Forum: Turntables
  20. Zach Nelson

    Wood Headshells

    What's your experience with wood headshells? What kind of wood is best? I have a Grado mahogany cart. Should I use a wooden headshell, or is it too much wood?
  21. Kelso1

    ATP-12T questions and setup

    Hello everyone. Long time reader, first time poster here. I'm needing information on setting up a newly acquired turntable. I have a Technics SP-15 with the ATP-12T tonearm. The tonearm is missing the headshell and I do not understand if a certain headshell needs to be used or what the...
    • Kelso1
    • Thread
    • atp atp-12t audio headshell sp-15 sp15 technica technics tone arm tonearm
    • Replies: 17
    • Forum: Turntables
  22. A

    Help! Pl-518 headshell wire came undone

    Hey guys pretty upset about this was installing the new cartridge and one of the wires came undone.. Is there anything I can do? I don't have a solder all I have is super glue and I'm sure that wouldn't work... Any recommendations? Really upset because the last part I needed to get this thing...
    • amorax
    • Thread
    • headshell headshell issues pioneer pl 518
    • Replies: 4
    • Forum: Turntables
  23. J

    Thorens TD-145 Headshell Issue

    Hi guys, having a very stupid issue that I hoped somebody here could resolve! Just got a Thorens TD-145 mkII from craigslist which I already love. One issue: in changing cartridges, the little strip of metal on the headshell that says "Thorens" popped off. I've spent a really long time trying...
    • jbiz123
    • Thread
    • headshell td-145 td-145 mkii thorens
    • Replies: 4
    • Forum: Turntables
  24. A

    Kenwood KD-2070 missing Cartridge + Headshell $50

    Local Facebook seller selling Kenwood KD-2070 turntable for $50... looks like it needs cleaning and isn’t in awesome shape. Link to post. Is this a good deal/worth it? I’m relatively new to vinyl but If I could score a sweet deal and tinker w restoring this that would be fun. What questions...
  25. otodus

    Hard to find headshell (PL-41)

    Hi all! Hoping the AK community can help me out. Been slowly fixing up/re-repairing an old Pioneer PL-41. I’ve had a janky headshell for a while and would like to finally get the real deal. Problem is it’s hard to find the original headshell these days. Newer ones are also far too light for the...
    • otodus
    • Thread
    • headshell parts pioneer pioneer pl 41
    • Replies: 4
    • Forum: Turntables
Back
Top Bottom