• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

hum

  1. bscepter

    Headshell/tonearm hum due to dirty or loose connection?

    I've recently run into a background hum problem with my Thorens TD 145 (TP-16 tonearm/Ortofon Super OM 20 cart). After removing the headshell to invert the deck and adjust the suspension, I now have a background hum that gets worse (or at least different) when you touch the tonearm and...
  2. L

    ELAC Miracord 50 HII hum

    I picked up this TT at an estate sale. In great condition but when I connect it all up, there's an enormous 60 hz hum that completely overpowers the signal. Internal grounds are connected and I even installed a ground wire from that common point to my amp's ground point. The TT has a DIN...
  3. jimmythetuba

    Stereo hum when dvd player is turned on?

    Greetings everyone. I haven't posted in here for years. I'm hoping to get some help with a Denon DVD 2900 dvd player that I've had for some time. It's developed a hum. It produces the hum on the stereo only when the dvd player is turned on. It's loud enough that it's noticeable when the...
  4. S

    Stereotech 1200 - Hum in both channels

    I have a Stereotech 1200. Over the winter it developed a hum on both the left and right channels. Hum is present: with no sources connected on multiple outlets and house electrical circuits on multiple sets of speakers and wires regardless of 2 prong plug orientation (again tested on...
  5. ssouci

    X-202 - hum when using Phono

    I have a Fisher X-202 integrated tube amp that sounds very nice have been playing only CDs so far, using the Aux input... sounds great, nice and quiet just hooked up my old turntable, a vintage Dual 1209 idler wheel unit (with Ortofon VMS 5E Mk II cartridge) seems to play fine, however, I'm...
  6. L

    NAD 3020 power on noise/hum

    How difficult is replacing the C533 & C531(47uf 50v) capacitors? Thx
  7. forceof1

    VOM and the Creeping Humm

    Bought a small Voice of Music console to convert. No known serial numbers or model numbers. Took the tube amp out. The phono automatically turns off the amp at the end of the record so i severed the connection and use the Tape input for my TT, works great. Here's the big BUT when I turn it on...
  8. nickhead

    KR-7400 with a constant hum in both channels

    I picked this up recently. Has a hum in both channels. While troubleshooting I found that if I tapped the relay the hum would go away for a few seconds. So I reflowed the relay. No change. Ordered a new relay, put him in. Still has a hum, but tapping the relay now has no effect. Any ideas...
  9. Y

    Technics F-G-Servo Player SL-23 Humming Issue

    Hello, I bought a Technics SL-23 turntable, and it played fine when the guy connected it at the store. I took it home and then found out that the needle was damaged, probably my fault, so I bought a new one and replaced the broken one. I have power speakers, which worked fine with my previous...
  10. Moth R. Superior

    I've got a brand new hum (pioneer sx 750)

    Hello all, So, I've got a new hum goin' on. it almost sounds like a power sort of hum (as opposed to grounding) it shows up on everything, AM, FM, AUX, PHONO... any ideas? thank you in advance! -Mike
  11. bikingbuddha

    What could be the Filter capacitors of this circuit?

    I have no idea how to figure out. What could be the filter capacitors of this amplifier circuit? it is an tube hybrid called Qinpu Q2. I hope to fix the hum / buz it has by replacing the filter caps.
  12. MIL-Q

    Phase Linear 2000 Hum Fix

    Do you have 60hz hum from your preamp that seems to come and go and changes in amplitude when you press the selector switches making you think DeoxIT may be needed yet didn't fix it? Try tightening the the screws that mount the rear of the pcb board to the chassis via the aluminum L-brackets...
  13. Janotoro

    Technics SL-1700 (MK1) Hum/Hiss Help

    I got my Technics SL-1700 from one of my favorite record stores in Louisville KY as a gift when I asked about it. They told me it did not work, the speed change was stuck and the speed controls out of wack, it came without counterweight, headshell and mat. Before investing time and money on it...
  14. MBuras

    Marantz 1060B Rebuild & Troubleshooting

    Almost since the beginning of my time on this forum I've heard derogatory comments about the 1060B amplifier. Build quality is terrible, sound is terrible, nothing like the original 1060, etc. So of course I had to find out for myself. :D This one came to me in great cosmetic shape and...
  15. F

    short hum at startup of recapped NAD 3120

    Hi all, I am pleased with the recapping I recently did of a NAD 3120. Compared to the previous Quad 33 preamp I think it sounds a bit more open and defined. There is a small problem though. When I startup it will produce a short hum like sound in both speakers even at minimal volume level. The...
  16. 0kazaki101

    Audio Hum out of only Right Channel of System

    I recently got a hold of a cheap beFree Sound BFS-440 5.1 Channel Surround Bluetooth Speaker System. After a few weeks of the unit working completely fine, there came a day where an audible 60hz hum started coming out of both right speakers (front and back). The first day it started, it wasn't...
  17. birkbott

    Very low frequency hum when playing records at high volume

    I noticed today that if I crank up the volume during playback on my TT I get a very low frequency hum through the speakers, almost inaudible but I can see the woofer moving like crazy. It only happens while the needle is touching the record. Is it some kind of feedback? Or some other kind of...
  18. David Bright

    Horrible hum on Technics SL-D3

    I was using a Stanton L500AL cart with no issues then switched to the Ortofon 2m red and now have a horrible hum. Any thoughts. i would like to stick with the 2M red
  19. Kevbo

    Loud, Low Hum When Marantz Turned On

    I have been using my Marantz 2240B for about two years now with little issue (all have been fixed). And today, which was just another morning for me to turn it on to listen to music while working, a loud, low-grade hum is coming from the speakers. Music still plays fine, but there is the hum on...
  20. K

    Hitachi KST-3400H Right Speaker Level Pegged Issue

    I recently bought a Hitachi KST-3400H AM/FM Radio and Tape Deck with the original two speakers. The Radio works well; clarity is fair as far as I can tell. When I play a cassette however, the right speaker makes a loud buzzing/humming sound and the level meter is pegged (maxed) for the right...
  21. oztayls

    Thorens TD160S MkV - Speakers are picking up radio signals!

    Hi all, I'm looking for some advice from Thorens owners. I've just bought a nice TD160S MkV on eBay and fortunately it has arrived in one piece. I've not owned a Thorens before. It has a Grace 707 tonearm and the RCA leads are also Grace. After having spent a few hours putting some things...
  22. K

    Restored Dual 1219 squels and hums

    Hi guys I just got my turntable up and running, but there is a problem, two actually. The first problem, is a low hum like a grounding issue, except it should be grounded properly, I kinda blame the hum on the cheap RIAA amp and cheap RCA cables. The second problem is that the turntable...
  23. Cody AOC

    How Do I fix my Ground Loop Problem?

    Hi so I bought two Art EQ355's and they both give me a 60hz hum with my subwoofer and I have connected the eq on different circuits and it still does it I even disconnected all audio inputs to the eq and had the sub connected to the output of the eq and still get a hum I have heard about ground...
  24. Z

    MA 6100 60hz hum

    I have Macintosh ma 6100 and I have been using it for a while combined with a dac through aux input. It always had a low, barely noticeable 60hz hum through both speakers. I just got a turn table and unsurprisingly the hum is more noticeable through phono input. The hum is present without any...
  25. G

    Sanyo 825d Turntable with buzz

    I have a Sanyo 825d turntable which is new to me, though I am not new to Sanyo 825d turntables. Anyway, I was missing a channel so I replaced the RCA cables. The original cables where molded with the left right and ground together. The replacement is an inexpensive RCA cable and just some...
Back
Top Bottom