Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
First time posting on audiokarma, thought id share my set up and get some opinions! Currently im using:
-Pioneer SX-535
-Pioneer CS-500G
-Technics SL3200
After using the Ortofon 2m Red for some time, I decided it was time for an upgrade. I went with the Grado Black3, and decided to return it...
I picked up a SX-939 receiver recently and I've been plagued by the circuit protection relay going off and on again--or sometimes not on at all. The first thing I did was clean all of the pots and switches with Deoxit as its was popping and crackling all over the place.
I popped the case off...
See title. I was looking around online and read a thread where someone fixed the issue by recapping the power supply. I am pretty sure this is necessary regardless considering the lights sometimes dim a bit out of nowhere. But is there anyway to make sure that this is indeed the issue?
Hey AK Family,
I ran into the possibility of getting some B&W 686s for $200 and while interested was wondering if my system can drive it well? (pioneer sx-525) appreciate all your time and help!
My father used to enjoy listening to vinyl, even though CDs had become ubiquitous and ruled the music landscape by the 1990s and I remembered how lively the music sounded out of his stereo setup. Fast forward 20 some years and here I find myself trying to recreate a similar listening experience...
Hi y’all, first time long time..
I have been using a SX 636 for the past year, initially just with a tape deck and AUX cable (phone) while I was waiting to ship my record player (LP120-USB) to myself from storage in my home state. Once I got my turntable successfully shipped and began using...
Hi Everyone,
I am looking to buy replacement belt kits for two cassette decks, the Pioneer CT-F900 and CT-F950.
I understand that the same kit is used for both models, and that the kit comes with four belts, is that correct?
Which belt kits do people recommend? Are some kits higher quality...
Turntable: Kenwood KD-500
Grace G-707 Quadmaster tonearm
Vasari GoldNote cartridge
Receiver: pioneer SX-880
Speakers: Q-Acoustics 3030I bookshelf
What do you guys think of my first setup? I’m taking this unit to college with me when I move out in September!
I am looking for a value for the bias pots so I can find a replacement, both pots shorted out causing failure of at least one output transistor during testing on a dummy load.
So. I have a newly found PL 117D, that someone left at a recycling center - it looks pristine, other than a problem with the lid, but other than that, as I said, pristine.
Unfortunately, it does not work, and I'm kinda at a miss what is the real problem. I'm fairly technically inclined, but I...
Thought I would share my project video series from a restoration I recently did of a tired old Vintage SX-950 receiver I recently finished restoring. It now has a new lease on life and will still serve for many more decades to come. Jump to the last part to see the final outcome. Here is part...
As stated in the title, I’ve finally gotten to what I’m hoping is the end of the hunt for a new turntable, in order to upgrade from my current Audio Technica 1240XP. The 3 options I have right now (all used) are a Pioneer PL-707 (unknown service history atm, however functions have all been...
I was given a non-working SA-9100 a while ago and I'm now digging in. It's stuck in protection. Here are the voltages from the protection bard, AWM025:
1 -81.3mv
2 -13.1v
3 +0.7v
4 0
5 -81.8mv
6 -81.3mv
7 -83.5mv
8 -85.1mv
9 +39.4v
10 +39.5v
11 +39.4v
12 -3.4mv
All four outputs test...
Hey quick question.
I ordered a new cartridge for my Denon Dp30l. https://www.ebay.com/itm/164896750087?hash=item26649cba07:g:bfcAAOSwaddguRQu
It turns out i didnt need it. Can i effectively use this cartridge on my Pioneer pl-10 turntable? Its a cheaper cartridge and needle and i was just...
I currently Have right now:
Sansui G-22000
Sansui G-8000
Sansui 9090
Sansui 9090DB
Marantz 2285B
Pioneer SX-1250
Kenwood Model Eleven II
Realistic STA-2080
Sansui BA-2000 AMP
Nad 2200 AMP
DBX BX3 Large Amp with pre-amp
My Thoughts are to keep only the:
Sansui G-22000
Sansui 9090DB
Marantz...
Hello Pioneer Guru's! I am seeking some advice on my Sx-1280. One of my pre-amp boards will not adjust into spec for the DC offset. The "lowest" I can get it is -1.1V. That is with the VR turned all the way clockwise. The other pre-amp board will adjust no problem. I have replaced all the...
Hi all!
I've been reading through these threads and it seems to be a brilliant source of information but some of it, as a complete newbie, is a bit above me. So I figured I'd make a new thread and see if anyone can explain is super simple terms what needs to be done.
Please bear in mind I do...
I picked up this Pioneer 6 disc CD changer at Goodwill the other day. The lens had fallen out and gluing it back in was the first thing I did. Apart from that, nothing was done to the unit. After putting the lens back in, the CDs would play, but during the first track there was a clicking noise...
Hey!
Looking for some feedback / advice from folks that have experience with any of this gear. I'm considering an upgrade as the old Dual is getting a bit finicky and there's an opportunity in my area to get the Concept for a decent price.
Context:
I'm currently running a Pioneer SX-1080...
So I have been thinking sometime about how I would replace my collection of vintage gear.
In March of this year I had a car stolen from my driveway. I had a difficult time finding a car in like condition. The insurance company did not pay me what I thought the car was worth.... My car was...
I just got a new (to me) PL-41 turntable, and noticed something weird about the tonearm:
Now it looks to me like the guy just didn’t screw in the screws for the pivot point. I leveled it out and screwed them in, as shown below:
And now I’m wondering if the table is okay to use, or if I...
Hi, I picked up a nice looking Pioneer UKE 3100 Car Cassette deck stereo. It powers up but I don't get any sound when I connect speakers. I tested with 1971 Ford original speakers, so I am going to try newer speakers and see if that changes anything. Does anyone have or know where I can find...
So I just recently graduated college and I've been scraping by on whatever bargains and deals I can find for my audio equipment, but now I have a real job and I'm looking to start taking things to the next level.
Problem is, there's too damn much audio equipment to sort through everyday (well...
Hello all,
First post - patience.
I've been running a Pioneer SX780 for some time now, love Pioneer SX series. However, my speaker knowledge base often gets overrun with too many options.
I want to run an A/B setup to play both, or just A depending on situation. Budget isn't a huge issue...