• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

preamp

  1. B

    Mcintosh c37

    i have read this is a good sounding preamp but when I purchased one in great condition I tried it in a friends system jc halos with audio arrow capitola and Piegan p10s the sound was dull, , small sound stage when compared to just using the audio arrow as the preamp. Any possible thoughts on why...
  2. ppeterso2

    Nikko Beta 30 relay

    Hi I've read a few threads on this: the relay on my Nikko Beta 30 Pre amp is acting up and cutting out the audio haphazardly. When I tap on the relay with the handle of my screw driver, thump and the audio clears up. I sprayed it and it got better but still cuts out and needs replacing. What...
  3. grantray

    A not-so-original V1 McIntosh C20 preamp and the quest for a baseline of "factory spec"

    Well, I got it Friday and spent the weekend cleaning out 50 years or so of crud with isopropyl rubbing alcohol, cotton balls, q-tips and electronics cleaner. Here are two samples of before the scrub down, complete with crusted cables from decades of buildup... And here's what the inside...
  4. grantray

    Preamp outlets in vintage equipment or powerstrip?

    Hi! I've got a really nice early model C20 preamp en route, and was wandering if anybody uses the preamp outlets for tuners/amps/phono, or if those outlets are no longer best for use. I'm used to running power strips/conditioners, myself, but if older equipment like my MR67 and restored Garrard...
  5. Aaron J.

    2245 Preamp Recap Screwup - Help

    I have a feeling there's many answers to this, but are there any common mistakes made when re-capping the P400 preamp board in the 2245..?? It was the LAST board on this rebuild and now I'm only getting the right channel for output. The amp was working fine yesterday. I've used it for a...
  6. B

    Advice on an MM phono pre

    Hello, first post in a very long time. I recently upgraded my integrated amp from a Marantz PM5004 to a Classe CAP 151 (huge leap), which doesn't have an integrated phono pre, and I'm looking for some advice on what to get in the $300 range. Some options I've been looking at are the Schiit Mani...
  7. lattiboy

    Looking for cheap tube preamp with tone controls

    Hi all, I currently have a SMSL SA-98 amp. It's got more power than I could ever want, but no tone controls. Is there a cheap (probably Chinese) tube preamp with tone controls that anyone can recommend? The only one I can find is this model, but it only has limited reviews. I currently use...
  8. B

    SX-750 Left channel PreAmp issue

    Hi! I'm first time here, so please let me know if I'm doing something wrong! I'm looking for some help on an issue my Pioneer SX-750 has developed recently. The left channel has a problem audible, while the right channel seems to be fine. The issue I can hear on the left channel I can describe...
  9. D

    Primare pre30 doesn't turn on

    A week ago I got this Primare PRE30 from a friend. I'm used to working on older gear so I didn't promise anything but said I would try. The unit doesn't turn on (not even the standby indicator). The power supply delivers all the right voltages and all the opamps seem fin (+/- rails are there and...
    • depaj
    • Thread
    • doesn't turn on faulty preamp primare pre30
    • Replies: 15
    • Forum: Solid State
  10. J

    What should I replace a Sony TA-E900 with?

    I have been using a Sony TA-E900 preamplifier for many years and have loved it because, to my mind, it has the perfect balance of musicality and detail. It is not too warm and mushy like some valve amps and not too harsh and 'in your face like some solid state ones. Unfortunately it now seems to...
  11. greenflash

    Preamp 3800, anybody using it with two power amps?

    Hi everyone, I have a 140 Power amp without a proper preamp and I'm considering both a 250 power amp and a 3800 pre. Maybe I'd go first for a pre and then for the second power amp. Anyway I've read in the manual that the 3800 is able to "feed" two power amps *simultaneously* Now the seller...
  12. SpicySammich

    If you had a choice between these 2 preamps...

    The Pro-Ject Phonobox DS or the Gram Amp 2 SE Which would you pick and why? I'm running a Debut Carbon with Orto 2m Blue -> Sansui 2000a -> Focal 807v's Thanks P.S. I spin mostly dub/reggae and classic punk and alternative with occasional bouts of jazz and metal.
  13. H

    Upgrading / Updating a Threshold FET ten/pc

    I am going through an oldie but goodie FET ten/pc, and I changed all the electrolytic caps and I would like to upgrade the caps in the signal path. Has anyone changed these caps? I see four 10uf axial polyester caps as well as four 1uf axial caps in place, I dont have a schematic of this unit...
  14. J

    Mcintosh C-28 thoughts and recommendations.

    Hello all! Just picked this up yesterday for a great price-all original with manual and paperwork, great cosmetic condition and looked at by a tech at a trusted location for sales and service. It is in working condition, just a few scratchy pots. From what I've read, people either knock this...
  15. jprossi

    Help with ARC Preamp

    Hi all, I've enjoyed reading posts on AK for a while now, but this is my first post. I've recently acquired some new gear: an Adcom GFA-555 and an Audio Research SP-6c. When I got everything hooked up and switched on the SP-6, nothing happened. The green LEDs for "pre-amp on" and...
    • jprossi
    • Thread
    • audio research preamp preamplifier tube
    • Replies: 9
    • Forum: Tube Audio
  16. Warszawa

    Lexicon CP-1

    Anybody know where I can find a remote for a Lexicon CP-1? Any help is appreciated.
  17. D

    G-7500 Phono

    I recently picked up a G-7500. The thing looks and sounds awesome and is definitely an upgrade from my early '90s pioneer receiver that I was using. The only issue I am having is with the phono preamp. The right channel is working and sounding great but the left channel is not playing anything...
  18. TellMeWhy

    Chinese Marantz 7 preamp clones any good?

    Does anyone have experience or opinions on the Marantz 7 clones available cheaply on the net, kit or otherwise? Is there such a thing as a great, newly built, tube preamp, with or without phono stage on board?
  19. ScooterMcTav

    Adding a Pre Out to a Luxman R-1050

    Morning All, I currently own a Luxman R-1050 and truly enjoy the sound from it. However, I have also been presented with an opportunity to get my hands on a Jolida JD-302BRC, which although an integrated, has no phono input, and overall limited inputs. So my thoughts were to use my R-1050 as...
  20. TellMeWhy

    Modern versatile preamp to partner Rotel RB980

    Hi everyone, can you suggest worthy preamps (tube or solid state), at under $500 new or used, including phono preamp and inputs for tape, aux etc, that would partner a Rotel RB980 power amp? I would like some form of contour / loudness / presence control and something that looks the part too (to...
  21. 3

    YAMAHA C80 & C85 PREAMP HEAT SINKS

    I have noticed the heat sinks in the C80 & C85 preamps have a threaded hole for a machine screw. My C80 & C85 do not have the screws that secure the sinks to the PC board & they do move a little although the solder connection is fine. I purchased them used so is this normal or has someone...
  22. vaathi

    What is the difference between Fisher 80C and 90C?

    They do look the same. Other than that any other difference between them. Even tube complements are same. TIA
    • vaathi
    • Thread
    • fisher fisher 80c fisher 90c preamp
    • Replies: 5
    • Forum: Fisher
  23. adriantsui

    PAS-3 tape output when off?

    Hi everyone, I am thinking about getting a Dyna PAS-3 as I want to make the final step in making my setup fully tube from A to Z. Currently I am using an SP-9 mkii (a tube/SS hybrid) as my preamp. When I am not intently listening to music (podcasts etc) and want to save my tubes, I have the...
  24. Dubestar

    Marantz 170 DC Amp has no power on/off how do you properly manage connecting to power?

    Hello, I recently purchased a Marantz 170 DC Amp and have it paired with Marantz 2270 as the preamp. There is no power on/off button on the Amp. The manual says to plug it into the switched AC plug in the back of the Pre Amp (2270) - That works fine, except when I go to turn off the 2270 there...
    • Dubestar
    • Thread
    • 170dc 2270 amp marantz marantz 2270 marantz 2270 as preamp marantz amp popping sound preamp
    • Replies: 3
    • Forum: Marantz Audio
  25. J

    Phono preamp suggestions, please

    I'm looking for a decent, but not break-the-bank-expensive preamp with a headphone jack. I'm running a Music Hall 2.2le through a Fisher 800-B. Thoughts and suggestions much appreciated.
    • JDG
    • Thread
    • 2.2le fisher 800b preamp
    • Replies: 12
    • Forum: Turntables
Back
Top Bottom