• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

speaker

  1. J

    Custom Terminal Build

    I'm finally addressing an issue that started, round about ten years ago, broken speaker terminals on my Fisher CA-2120 Integrated amplifier. I've been using this as a pre-amp for the Hafler P500 amplifier since the speaker terminals were junk. After the first two, the A and B R+'s broke, I wired...
  2. Richiecee

    Speaker pairing with McIntosh?

    I just acquired a C2700 pre amp and a MC152 amp. Any suggestions on what brand speakers I should focus on?
  3. BILL JOBS

    Rattling/Farting Event 20/20 Monitor

    Hi there, I have a noticeable rattle on the low end on one of my Event 20/20 studio monitors. Here's a recording of the farting/rattling speaker: And the working speaker for comparison: Is this something I can repair myself by replacing some component of the speaker myself? I've already...
  4. richardg0n

    Marantz 2325 PU01 Multipath and Speaker Relay Short

    Hi Guys, My 2325 lost the right channel while playing music. Pushing the hi and low mutlipath buttons brought back the right channel temporaily. I decided to DeOxit the switches and pulled out PU01. The right channel output retuned and reinstalled PU01. The right channel again stopped working...
  5. C

    Sound but no bass from 1 speaker

    I have some passive speakers, one of which doesn't have any bass to it. They're 3-way and were working fine. The top and mids are playing, just no bass. I have ruled out amp, cables and source by swapping out all of these components with different components. Would replacing the crossovers'...
  6. davstev

    MIT Universal Terminator Module T-4 - What is this thing?

    A bit of googling, but still no good information. What is this thing? There was one of these stuck on to the back of each of the very nice ProAc speakers I recently picked up. I immediately removed them, thinking it's a gimmicky or otherwise useless device. Anyone know what it is, what it does...
  7. davstev

    ProAc Tablette 50 - bad surprise when I got them home

    Purchased a pair of ProAc Tablette 50 mini monitors from a nice local couple. They'd wrapped the speakers in towels and had them stored in boxes for many years, and finally decided to sell them. They're pristine. But they stored them in possibly bad orientations in the box, on the side, and...
  8. davstev

    Celestion SL6si (have) or ProAc Tablette 50?

    I have the Celestion SL6si, and I like them a lot. They are detailed in the treble but not necessarily that open sounding up there. Would the rather small ProAc Tablette 50, give me anything that I don't already have with the Celestions? Some people rave about them. I am listening in a smallish...
  9. davstev

    Inductors for dummies - crossover conundrum

    I'm probably in over my head again, that's why I'm turning to AK. I am endeavouring to repair a crossover that I'm sure is faulty, somehow. It's for a Rogers LS7. I'm sure it's faulty because I've tested the woofer and tweeter and they're producing sound when a signal is applied directly. All...
  10. DomPal

    Where to connect the sub on a Marantz 2270

    Hello, Is it right that you connect the sub on the remote speaker termials on a Maratnz 2270 and the stereo speakers on the main terminals? So when you are listening to music you should have both main and remote speakers switches turned on. Is this bad for the amplifier or is a 2270 made for...
  11. nwootton

    Jamo Cornet 70 Floorstanders

    Long-time lurker, but first-time post. In the mid-/late- 80's I got a pair of Jamo Cornet 70 floorstanding speakers. The label on the back says: Rated power: 90W Music power: 120W IEC (268-5): 40W Impedence: 6 Ohm I'm trying to find out other information about them -...
  12. M

    suggestions for a tiny speaker with specific requirements

    I need several small powered speakers for a sculpture project, but the nature of the project implies specific requirements. The speakers will be installed on a flat board hanging on a wall, and covered by a mask that has low clearance. no bluetooth needed - wired AUX input mandatory. Ideally...
  13. Virus

    Tweeter with saturated screechy sound

    Hello, I am posting a new topic because of what I found out so far. I'm new to the forum and am also new to repairing audio DIY style, so let me cut to the chase. I've acquired a pair of ATL Celebration speakers (quite unknown but sound terrific), and they seem to be suffering a problem. ATL...
  14. Reyhifi

    A couple of odd speakers

    My purveyor of vintage audio or anything, send me a couple of photos. The guy just hussles stuff, he doesnt research or anything. So the prices are usually great. got a amp and a pretty cool receiver from him. Hoping for a marantz or Mc, one day. Anyway, one is clearly a very cool jvc, looks...
  15. R

    'Focus Speaker System' branded - mystery to me

    Badge says 'High Definition Monitor'. I was given some somewhat de-constructed floor standing speakers and would like to get them working. So far I have just one power ed up and the woofer but not the tweeter works. Also I am wondering if they worth working on from the standpoint of how will...
  16. NH-MAN

    08 Buick lucerne LF speaker out

    Parked night before fine, start up next day its out. Its never gone in or out before so no hint of bad connection. Banged on dash nope slammed door a few times nope. still out today wiiggled wires in door jamb nope tweeter that side works. I never crank it and it doesn't get that loud...
  17. H

    SB-C 250 speakers crossover

    Post deleted. Found an answer from schematic.
  18. F

    Kenwood KL-888A Speaker

    Hey all! New here! I’m working on rearranging my setup because I inherited 4 of these KL-888A speakers. I only have one hooked up right and it’s wired into an RCA adapter and plugged into my receiver which my tape deck is hooked up through. The speaker sounds fine (no rattling or anything...
  19. Doug Robert

    Genesis 1 W/cone in center of woofer? Looks modded?

    Picked these up today at a thrift store, (well my dad did after scouting em out for me lol, I love that man so much) and upon doing some research on them when I got them home, I couldn't find any that have a woofer similar to mine. Anyone ever seen one like this or know the pros/cons of the...
  20. buckeye56

    Bluetooth Speakers

    Yeah, I can already hear the groans and see the eye rolls, but I want a small bluetooth speaker to take on trips. I bought a JBL GO 3, unboxed it today, and for me, there is too much bass. I’m thinking this may be a non issue for some folks, but to me, the music just doesn’t sound like its...
  21. VintageDutch

    Marantz Imperial 7G

    Hi all of you gurus. Yesterday I found a set of Marantz Imperial 7G speakers. All original parts... Contacted the seller, made a deal..for € 50,-- (indeed about 50 dollars also) ..I like to think that was dirt cheap. Picked them up today... I plan to test them Sunday during the Grand prix...
  22. A

    Speaker Cutting In/Out and Volume Increases

    Hi all, I disassembled the head module on one of my KEF 105.2 speakers to try and replace an LED that glows at various wattage readings and helps you position the speakers. I decided I'll try to clean the connections (there's a small PCB in there) instead. Used Deoxit F5 and D5; sprayed visible...
  23. M

    Looking for ways to add bass to my PC speaker system?

    I have a 2.0 PC speaker system which works fine but I'd like to increase the bass on it. I also have another 2.0 PC speaker system which doesn't work anymore when plugged into the mains, but it's still possible to use the secondary speaker if you connect it directly to a phone or a laptop...
  24. M

    Can I install passive radiators into a speaker box with regular full-range speakers?

    I'm hoping to build wooden enclosures for these PC speakers I have. The drivers I'll be using will come from 2 different 2.0 PC speaker systems, and I'll be putting one driver from each into each "new" enclosure. I would also like to put passive radiators into the new enclosures. I've heard in...
  25. H

    Speaker crossover capacitor advice - Technics SB C-250

    Have just acquired a pair of Technics SB C-250 vintage speakers. Generally they’re positively reviewed and I’d like to get them performing at their optimum. Questions: -What is the key quality one should seek in capacitors being used in a loudspeaker crossover (low leakage? or something...
Back
Top Bottom