switch

Hello, I have switch on the back for the impedance - 8-16 ohm and 4-6 ohm. I have Pioneer HPM 700 - 8 ohm speakers and Elektronika 35ac-015 which are 4 ohm. I usually listen to the Pioneers. On the net I found that if I put the switch on 8 ohm the amp will have full power. If I put it on 4 ohm...

Is there such a thing as an amp or receiver switch? I’m looking for something simple to switch between two vintage receivers but output sound to the same (analog) speakers. I’m not skilled to make a switch myself. I’m looking for a good quality switch that doesn’t filter or alter the sound or...

Hi! I'm having some issues with my 8-track player. It plays just fine but the program switch (which just shorts to ground and is supposed to switch a coil and activates a mechanical switch to move the tape head into the next position) and lights to show which program is on stopped working all...

I bought this R30 because someone had knocked the speaker selector. Opening it I realized that the contacts in the switch are broken so it does not make contact. Any idea how I should bridge the switch by wiring it or ideas on how to restore the tracks?

I’m looking for recommendation for a quality switch - minimum 4 RCA inputs and 1 RCA output. No need for volume control. Smaller is better. No added noise or sound coloring. Literally just switching between sources. I use it to switch between sources like CD player, turntable and tape deck...

I recently acquired a Fosi LC30 amplifier/speaker switch. I have been on the hunt for a good product to accurately A/B compare speakers and amplifiers for a while now without breaking the bank. The Fosi LC30 is a nice all metal constructed A/B speaker/amp switch with VU meters and a remote for...

So I have a bad Speaker select switch in my 2285B. I ordered the black replacement from Digikey and it does not want to fit the dimensions. Does anyone know where I can find a better replacement? Thanks

It has been a while since my last post, but that does not mean I haven't been busy..... Currently working on a Sansui AU-555 which was totally neglected by the previous owner. I am trying to make her beautiful and working again, and for that I need your help. Unfortunately I cannot get the...

Power LED on Adcom GFA5800 is out. How to replace, what part, etc. Thanks a million to anyone who can help!!

I have a spare Sansui 7070 I ordered from eBay quite a number of years ago. When it arrived the speaker selector switch was badly bent. UPS Insurance reimbursed the cost so it was free. After it sitting in the basement for 8 years or so I dug it out and fired it up yesterday and it works and...

Push pull switches. When servicing can anyone advise on best lubricant for these switches in vintage amps. Ideally, a homemade recipe as I just need to disassemble and regrease one switch. Can petroleum jelly be used? Thanks in advance.

Hi, I need to replace the broken start switch of a Dynacord IST 104. The original model is a Dialistat 2-pole type (DPDT), same as the one pictured below but with a larger metal holder allowing screwing it to a metal plate, itself attached to the metal body of the turntable. The blue plastic...

Hello all. This is a long shot I feel but I have come into possession of this project one receiver that is in immaculate condition. The only problem is the high tone switch was broken at some point. I’m now trying to open it up and repair it. I have added two pictures below but I’m unsure how...

Hi y'all, Firstly, sorry to bring out this old question again, but recently I just received this inquiry from my friend who is also on his way to digital streaming though, as we were discuss whether a network switch would help or not like everyone else, he sorta struck me with this, " Based on...

Hi guys, So I've been meaning to ask if there's an optimal way to stream these streaming service, if you know what I mean..., like some players which directly support TIDAL or Qobuz or Amazon Music and stuff, but what if I stream TIDAL through Roon, would the sound quality get better? and why...

Any ideas on where to buy a toggle switch cover (small piece that is at the tip of each switch)? Mine is forever lost since it came un-glued and is so small.

Hi guys, When it comes to sound quality, I've realized there're freaking many factors could affect it, some say the DAC is the paramount thing to be taken care of; some say the speakers are the real crucial part, given that you hear all the sounds from them, there's no certain right or wrong...

anyone know of a source for this switch ? I am missing the power on/off switch from Sansui AU 101. Thank you.

I think it's been a quite controversial topic for years, like what's the difference between normal network switch and an audio grade network switch, the price difference is certainly obvious though... Anyway, I've done some researches, most audio reviewers say that under this " new digital...

I was facing a job involving rewiring of the 500C’s 7-position 5-section selector switch and realized I did not have near the understanding I needed to feel good starting. To help myself get there I put together 7 drawings to show the state of the network and signal path for each switch...

HI, I have dozens and dozens of switches laying around of all different ratings and I was wondering what the ideal rating would be for voltage/amps for a on off power switch for a marantz model 32 power amplifier. Thanks

Hello everyone, been a while since posting, but I troll a lot because this forum is a great resource. My AU-11000 recently quit working, and the guy looking at it believes it’s the input switch. It turns and clicks, but the piece that actually changes connections is not moving. Does anyone know...

All, Looking for a modern replacement for the the ALPS slide switches in an 1180DC (also used on the 1152 and 1300, probably others too). Marantz part numbers SP04010210 and SP04040170 (15Hz and tone defeat switches). There are not the same design as the F4UEE switches. Thank you!

Greetings, A very close friend from high school convinced me to go the Hafler route many years back and I purchased both a DH-110 preamps and XL-280 (both in kit form) just about 35 years back. Though I've had a few minor connectivity issues arise over the past few years with the DH-110, the...

Hi, Is there a model of power switch which fits the Luxman L-31 ? As I don't have the amp with me right now, I can't even try to see what can directly replace it. Thanks !