Hello everyone,
Hope y’all had a great holiday weekend. So, I started an Accuphase E-202 thread sometime late last year and I was getting help from many of the gurus here at AK. Unfortunately I got sick and had to place many of my projects in standby to focus on my health.
I was trying to get...
I am a new member to Audio Karma but a long time Audio/Video fan.
I recently bought a Technics SA-5370 from an auction website (no returns). The receiver is in nearly new condition (little dust, no marks). It appears to work (everything lights up, buttons/knobs work) however, normal sound...
I picked up a pair of Minimus 26s at Salvation Army over the weekend, for the $5 it seemed worth the gamble and they appeared to be in good shape. The timing worked out well as I needed a smaller set to test out my recently cleaned up Pioneer SX-434 which will eventually be connected to a set of...
So my MX110 is now recapped (basic recapping) and have no more smoke on 220ohm resistor (R152) (other thread).
Now, there is no sound coming out of the tuner - not even noise - switched in/out the muting switch. nothing.
There is a slight movement in the tuning visual indicator when I roll...
I know there a lot of similar posts and I've read through many of them, but I still can't figure out the problem. When I turn on the unit the relay never switches on and no sound will come out. I checked the pre-amp with a separate amplifier and it is producing good sound. I've checked all the...
So I had bought a Fisher RS-912 and I can't figure out why I can't get any sound from the receiver i've tried almost everything no sound from speakers and no sound from the headphones the muting was on however I managed to figure out how to turn it off muting but still no sound I even had the...
Hi
Just got a free Yamaha RX-V670 A/V receiver and it lights up, all buttons work...but no sound. Made sure Mute was off etc, Detoxed dials, checked and changed speaker connections. Still no sound. Appreciate any thought on what it could be. It doesn't seem worth expert diagnosis as they can...
So, I recently acquired a Pioneer C-72 pre-amp and a DBX BX3 power amp. I'm trying to hook up this new system and I've having an issue. For the pre-amp output I have the option of "Fixed" or "Variable" Outputs. I can only get the unit to output using the fixed ouput - which isn't what I want...
Hey all new member here on the forum. A coworker gave me his old Sansui G-6700 series receiver and a pair of Bose 501 speakers. When I first used the setup it worked perfectly with no problems. Then I moved and I have tried and tried to get the set-up to work but it just wont. The speakers make...
Hello fellow AKer's, I just happened upon a Technics SA 5570 and I was pretty excited to hear a more powerful Technics system.
I've been using an SA 300 for some time now, and I've always been impressed with the quality of these amps. They still seem to be somewhat of a sleeper as far as...
Hello guys.
I'm working to repair a Marantz 4400 not tuned FM. I located the diode H808C short and after repair the line FM returned to normal.
However, the Left side is muted in the scope and output of the boxes, only returns to play the sound in MONO mode. This problem is only on the FM...
Hello folks,
So I just acquired a beautiful CA-2010 in exchange for beer money and it looks to be in great condition, but I can't get it to play!
First thing I did was power it up and see if I could get anything out of it. I tried everything I could think before taking it apart...
I've been working on an SX-V80 I picked up a month ago or so. Giving it a recap, replacing very worn trimmers and some resistors. I finished the job and powered it on for a test to find the left channel was very weak.
After a lot of probing, I've found that the signal remains strong all the way...
Hi All,
I hate to make a new thread about the Pioneer SX 434 as there seems to be so many, but I am stuck a moment in my repair process and I would like to be able to revitalize this unit without having to take it to a shop (and certainly without having to throw it out, particularly because I...
Hello, I have a dual 604 that is using a shure m97 as a carttidge. When plugged into the phono jacks on my receiver, there is no sound. I have checked continuity from the cartridge mount to the rca cables and everything is fine. Any ideas as to why there is no sound? The receiver im using is an...
Hi all,
I just picked up an old Technics SA-505 at the local thrift shop for $25. Cosmetically, it's in pretty nice condition, except for a spot of peeling vinyl. I plugged it in at the store and everything lit up. All the knobs turned smoothly and it found FM and AM stations just fine. Alas, I...
I've been dealing with an Onkyo TS-DX555 receiver that has no audio at the remote speaker zone (as it is known on this model).
On this model, instead of A and B speakers driven by the main front amplifiers, it uses the surround amp channels to drive remote speakers. The sequence is to press...
Hi AudioKarma,
I am not a very smart man. I was recently gifted my father's Yamaha CR-640. The unit sounded great, it was just missing some lamps. I got replacement lamps today and replaced all four above the tuner. Now, this is where I made a HUGE mistake... I turned the unit on to make sure...
Hello. I have recently obtained a JVC jr-s 501 that has some issues.
The biggest issue is the sound on the unit just barely works. When I first got it I thought that no sound was coming in the speakers what so ever, but after some monkeying around, I find that if you turn the volume up to full...
when i got home earlier today i went to listen to a record i got in. the receiver was working fine, besides the right speaker was only making a distorted static noise. i then turned the receiver off and checked the wires on both sides. when i turned it back on there was no sound at all. i don't...