• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

kenwood

  1. Flapjacks

    Kenwood KR 6050 record player ground question.

    I've got an old KR 6050 and it talks about grounding your record player to get rid of ground hum in the manual but modern record players don't have a ground (at least mine doesn't). Can I just ground it to some metal or something? Would that get rid of the hum? Any suggestions of things that...
  2. N

    Kenwood KA - 8004 Integrated Amplifier ?

    Hi everyone, I've been upgrading my home listening setup as I've enjoyed listening to vinyl more and more during the pandemic. I recently acquired a great sounding pair of Snell J2 speakers. I am looking to get a nice vintage Integrated power amplifier to pair with them. I have the...
  3. Sergimm

    2SC1345(E) replacement doubts

    I am following the routine replacement of old 2SC1345 transistors with KSC1845FTA in the control board of a Kenwood KA-5500, but I can’t find the data sheet for the E model of the 1345. They are the ones with the “outhouse” shape, and they have blackened legs up to the transistor itself, so they...
  4. G

    Kenwood KR-V9080

    Hello Members, I'm trying to figure out what the phono input capacitance is for this model. I downloaded the service manual and located the Phono Amp on page 51, but I have no knowledge when it comes to schematics. I didn't see anything identified as "pf", but, I've seen a few "P" values which...
  5. Filip I

    Kenwood KA 770 worth a shot?

    Hi guys, being a hi fi hamster, I couldn't pass Kenwood ka 770 ( dld ) this morning. It is sold as non working unit but what the hell, another project for the future. It looks mint and silver so I couldn't resist especially since it is considered to be rare speciment. I bought it upon good...
  6. toby7362

    Receiver choices

    Hello all, I am looking for a vintage receiver to support my Yamaha YP-D71 TT. I currently have a Fisher 1035 but am looking for something with a little bit more output and a cleaner sound. Am looking forward to your responses. Thank you so much.
  7. bazzle592

    Kenwood KA-2500 "spirited" offset

    Hello all! I picked up a Kenwood KA-2500 at an auction a couple of months ago, and have been working to restore it. Unfortunately I've hit a bit of a roadblock. Upon initial testing I found that it had a light hum and a horrific +20VDC offset on both channels that gradually falls to a much...
  8. M

    ADC integra xlmII arm compatibility

    I'm considering picking up a Kenwood kd-550 with the stock s-shaped tonearm. I currently use an xlm mk2 with a rxm-II stylus (originally meant for an integra headshell). I have the integra headshell/cartridge as well, and if I were to get the kenwood, I would plan to use the integra headshell...
  9. Y

    Snubber Cap Value?

    My Kenwood KR 8050 makes a loud 'pop' sound when shutting the unit down. The on/off switch includes this capacitor marked 103P. Would this Cap be a good replacement?
  10. Bo Smith

    "Do turntables sound different" comparison video

    We primarily are listening to cartridges at this price point, many say, and I was wondering how true that is. I put a ton of work into my latest YouTube video where I shootout two similar vintage turntables and see what's different: Technics SL-D2 & Kenwood KD-3070 Let me know what you think...
  11. jeeem

    Underrated Kenwoods?

    My first real stereo system was built around a Kenwood KR-5400. I've always loved the look of Kenwoods, as well as their sound -- and I actually prefer the handsome appearance of many Kenwoods (and Sansuis and Pioneers) to the more in-demand Marantzes (whose pretty faces are certainly nothing to...
  12. Sglaw461

    Kenwood KR-9050 ISSUES

    Hi all, Am servicing a 9050 and have an interesting question. According to the service manual and schematic the emitter resistors are all 0.47ohm but on the amp boards in this unit 2 are 0.47ohm and the other 2 are 0.22ohm. Picture below. This looks like it came from the factory like this, and...
  13. mozcho

    Kenwood KA 4002a vs 4002

    I would like to know the difference between Kenwood KA 4002a, and Kenwood KA 4002. I searched the net but no clear answer can be found.
  14. Dckt19

    ST-5v quadraphonic receiver

    Hello It was suggested I post here regarding this obscure kenwood receiver I have. If anyone has any info I would greatly appreciate it. Tuner works but it needs new globes which look very strange and it is filthy. Turntable is missing and dirt was coming through the hole, looks like years...
  15. Dckt19

    Ancient receiver

    Hello I couldn't find any info online so I was wondering if anyone has heard of this model of receiver. It looks too far gone for anything but the tip. Shame though it is a kenwood. Thankyou, sorry if this is a nuisance.
  16. Alec Heggen

    KD-5033 Auto-In Lift and Return Lift Issues

    Hello, I know its cheesy to make your first post in any forum one asking for help but I've got a 1974-76 Kenwood KD-5033 that needs a little help. I've already done quite a bit of cleaning underneath and oiling the internals as well. However, despite everything else working perfectly (cuing in...
  17. A

    Kenwood KR-V9030 not outputting left channel

    I have a Kenwood KR-V9030 receiver that I inherited from my father. It was stored in a garage used for woodworking so it is dusty and hasn't been used in a while. The right outputs sound great but I get absolutely nothing out the left, even from headphones. I have tried multiple inputs as well...
  18. sean sweeney

    Kenwood KR-6600 restoration etc.

    I have been working on this Kenwood a lot of this week. A friend sold it to me cheap, as it was stuck in protect mode... I kind of listened in on the amp section and heard that there was a lot of noise from bad transistors, in this case it was the 2sa733's as the differential pairs and others...
  19. Y

    Kenwood KR8050 Recap Project - Help with Strange Findings...

    Recently purchased a working KR8050 and decided to recap following the great post of Super Noob (https://audiokarma.org/forums/index.php?threads/project-kenwood-kr-8050.882572/). Unit is in generally good condition, with no evidence of prior work on PCB's or anywhere else . However; on the...
  20. Stereoboy70

    Kenwood 8010 no FM output

    Hey guys. Any info on why I have no FM output to my speakers?? I can tune AM channels fine and get sound but when switching to FM my tuning meter will center up at a known good strong station but I have absolutely no sound from either channel. All other functions work. Aux, phono, tape...
  21. W

    KA-4002...help please

    Hi all, thank-you in advance for any advice received. I recently purchased a ka-4002 from the original owner, in very nice condition (incl. user manual and wood trim). I'm really enjoying the sound coming through it, but have the following issues I'd like to fix: a) Once powered on, there is a...
  22. jeeem

    Time machine

    Mostly mid-'70s stuff. I like the warm sounds -- and the cool lamps. Sometimes I'll just turn everything on and lower the room lights, whether I'm listening or watching a movie. They make for lovely, soothing (if relatively expensive) nightlights. Anyway, this is the kind of stereo showroom...
  23. M

    $600 Fair price for modded Kenwood kd-550?

    I'm considering picking up a Kenwood kd-550 with a grace 707 tonearm and almost new ortofon blue cartridge for $600. The seller seems very knowledgeable about turntables and has lubed the motor and updated cartridge connects. The only blemish is that the dustcover has a crack near the left...
  24. Z

    Kenwood KL-777A Pair Subwoofers stopped working :(

    Hey guys, I was recently given a set of the Kenwood speakers above, I powered them with a Yamaha receiver I got second hand, the model number of the receiver is R-S202. I finally was able to play some music through them and they sounded great! All parts of the speaker were working fine, but then...
  25. Z

    Help! I was given speakers that I want to breathe some new life into! Pair of Kenwood 777A’s

    Hey guys, this is my first post on AK, bear with me here. First off, I wanted to say Merry Christmas to you all, and I hope everyone had a great day no matter how it was spent. Now onto the speakers! My boss gave me a pair of Kenwood KL-777A speakers, and I want to not only make them look...
Back
Top Bottom