• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

recap

  1. Will_Emanuel

    Yet Another SX-1050 Restoration

    Hello all, I have just wrapped up a major restoration on a newly acquired SX-1050 that had a very rough past to me and had arrived in very rough shape. The unit had been sitting in the attic of a small stereo shop near my university for nearly 27 years, according to the repair tag's date of...
  2. R

    Pioneer SA-910 vs SA-9100

    I have a Pioneer SA-910, which is the Japanese version of SA-9100, runs at 100V instead of 120V. It used to function with a hiss on right channel, but now it's going into protection mode, after a few minutes. I am looking purchase a recap kit, to recap the entire unit and change out the...
  3. DatGtrPlaR

    Sansui AU-999 recap and mod journey

    I had acquired this fine 999, which ultimately led me here to this forum for research, and it wasn’t before long that I became a Sansui fan. I always wanted to learn more about electronics and stereo repair, and it is quite serendipitous how this all happened. Not to long after that, I got a...
  4. Anonky

    QX-949 repair

    Long story short I have a pioneer qx-949 with a weak right channel in stereo mode on AM/FM/phono inputs; there is essentially no bass output and treble sounds off too in the weak channel. AUX input works perfectly in stereo mode (no weak channel). To make things more interesting, when I flip the...
  5. J

    MC 2255 & C29 service maintenance or component upgrades

    I'm taking my 2255 amp & C29 pre-amp for service and cleaning to our local technician in our area as the potentiometers are scratchy and sometimes the left channel gets distorted intermittently. Our local technician has done LED upgrades, DC offset, bias adjustments, power meter...
  6. S

    Recap rectilinear mini iii advice

    I have read these forums for years as I have shuffled gear in and out of the house, this is my first post. Picked up a pair of rectilinear mini iii recently in amazing shape but they clearly need to be recapped as the mid -- high adjustment need to be all the way up to get much of either I...
  7. zastin17

    Sansui Au-666 Error on Schematic PNP Driver/Output Transistors. "Correctly Drawn/Fixed"

    So I noticed an error on the AU-666 while tracing all my wires back throughout the entire amp. Based on evidence left behind, this was probably a revision Sansui never fully finished in the manual. They show the collector of the "TR813" 2SA537 driver transistor going to Pin 8 on the Driver PCB...
  8. Leestereo

    Leestereo's Restoration & Upgrade of a Sansui BA-3000

    AK member @greymatter 's very nice Sansui BA-3000 power amplifier received a complete restoration and upgrade; the restoration/upgrade of it's companion preamplifier CA-3000 can be found in this separate Leestereo's Restoration and Upgrade of a Sansui CA-3000']thread[/URL]. Part 1: F-2508 Power...
  9. James Cox

    Tandburg 2080 restoration problems

    Well I'm back with another head scratcher! My friend brought me a tandberg 2080 to try to get restored and up and running for him. I tried to warn him that I'm more familiar with tube stuff and have only done basic recaps on solid state gear but he wouldnt listen! So we this thing arrived on...
  10. Will_Emanuel

    Yamaha CA-1010 Major Restoration

    Hello all, I feel it's about time that I sit down and document my major restoration to my Yamaha CA-1010. This year I have done 6 major restorations on these units, 2 of them being on its big brother, the CA-2010, that has a lot in common. For those that need more info on the 2010 restoration...
  11. bitomaxsp

    Akai AA-1030 recap project and problems. Help needed.

    Hi AK members. I own 1030 for about a year. Bought it for 130EUR and enjoyed so far. I knew it was in original state and untouched inside. Only lamps were changed. My dirty hands started itching and I decided to check main PSU voltages. They were quite off, more than 10%. I decided I'd do the...
  12. Super Noob

    Project: Onkyo TX-8500 (mkI)

    In my quest to NOT buy anymore 70s receivers / amplifiers.... I have relapsed again. My focus is limited = great value, typical larger WPC, not working. Have read a lot about the TX-8500 mkII Onkyo and wished to find one. A TX-8500 mkI popped up locally in non-working state = it must be fate...
  13. M

    Need help to recap au555

    Hi guys: I need some help in order to choose a kit ro recap a Sansui au-555 Or much better, a list with suggested replecement/ upgrades (if available) in Stores as Digikey or mouser. I found a recap list for model au555 , but probably must be some changes. Manu advise or info ? Regards and...
  14. ocdecio

    First Receiver recap/restore, need advice

    I always resisted working on receivers mainly because I don't have the proper equipment (or knowledge for that matter) to align them if I have to. However yesterday I got this beauty for a reasonable price and couldn't resist. As I opened it I noticed it has never been worked on. It is in real...
  15. VintageDutch

    Been a while but now working on.....

    Hi all, Sorry to tell that it has been a while that i have been posting and reading here.. Been buzy... Took the time to repair my good old Trio cs-1560A oscilloscope... It now is as flawless as I could make it... Also worked on my SONY SQR 6650 receiver... Did a full recap with regular spec...
  16. JB8

    120 Cylcle Hum After Recap - AKAI AA-6600 - Next steps?

    Team Audiokarma, I recently found this dude, likely paid too much for it but love the look and the wood case. Trying to tackle the 120 cycle hum I'm getting out of both channel across all functions and with volume at zero. Welp, I replaced a bunch of caps because, well, I wanted to! This is an...
  17. 201bk

    Yamaha A-960II phono recap

    Hi, So I'm looking for reasonably priced good capacitors. Since I started to revive my old Yammie. Found a tech willing to recap it a while back so now it's working on Kemet caps. And sounds really good and lively. Except phono stage since it just started acting up so I think it needs a...
  18. dlucy

    dlucy's Kenwood KR-5030 stereo receiver recap and restore

    A good friend has lost his mind and decided to try his hand at restoring vintage stereos... and this is what I showed him what to do... to recap and restore the Kenwood KR-5030 stereo receiver he found, for cheap, at the local used record store. And his pictures after he cleaned it up and...
  19. guac

    Another A-700 repair thread

    So, I recently bought a Yamaha A-700 amp, without any prior experience in the field. It worked fine until a few days ago. Without knowing any better I put my record player on top of the amp, with the intention of putting risers below it some time later, well its too late now I guess. Hindsight...
  20. D

    Sansui au777 oscilloscope settings

    Hello everyone. After a lot of patience I was able to score an au777 with wood case. When it arrived I was surprised to see that no metal cover was under the woodcase...was the woodcase an option? No idea... inside was super dirty and a blown fuse. Checked the outputs... 1 of the d143 was blown...
  21. M

    Seeking advice for Acoustic Research AR-5 restoration

    I will start this off by saying although I've dug through many threads about restoring, recapping, refoaming, repotting these speakers I am pretty much a total newbie to actually doing the things. The other day I came across some pretty decent looking AR-5s on the local marketplace. Took em...
  22. taligentx

    Sherwood S-7900A - Repair and restoration

    Hi folks, here's a repair and restoration of a Sherwood S-7900A that initially had no power, and then after swapping a blown fuse would power up but had no sound on any input. It's been an interesting project, hope this helps and feedback appreciated if you see any issues or areas for...
  23. KinoRodori

    Need help identifying the audio path

    Hi all, I'm a budding DIYer and I need help identifying the audio path in this schematic I have. I want to understand what parts touch the audio. :music: I plan to do a recap soon and I know many would say it's not necessary as long as it works, but i for one like the peace of mind especially...
  24. H

    NAD 3020A recap assessment.

    Hi, Have just recapped my owned-from-new NAD 3020A. Sounds good on first outing and have managed to get 0mV DC on the speaker posts. Attaching some photos. Prior to buttoning it up, please could anyone knowledgeable on the recapping of this particular amp let me know if I’ve made any obvious...
  25. A

    KLH 12 Recap Help

    Hello Klh Yogis, I picked up a pair of KLH 12’s and I’m ready to recap them. I’ve recapped 5’s, 6’s, and 17’s so I’m pretty okay with the process. Does anyone know the Caps that I’ll need, and any other information to help make these sing? At the moment they sound like crap - and it’s...
Back
Top Bottom