• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sansui 7070

  1. J

    Will I have a problem running stacked Advents parallel with my Sansui 7070?

    I'd like to run stacked Advents, can my Sansui handle them wired parallel? I've been reading opinions that are all over the place and unsure. Some say wire them in series, others say the sound will suffer from that, they should be parallel. I'm not a tech and don't want to hurt my receiver, any...
  2. KeithD

    Sansui 7070

    I have this Sansui 7070 at home on a trial basis before a potential purchase. $550 asking price. I’ve already determined the stereo light is out or maybe the circuit is not turning it on. It does tune in stereo FM, so I think that is ok. Also, the power light is out. List of items the...
  3. kennycrippen

    Sansui F-2624 New Build From Affinity for Artifacts Question(s)

    Hello! I’ve just nearly finished building this board and it’s beautiful. Very grateful to Ben for providing the BOM along with the blank PCB on eBay. I unfortunately have made somewhat of a rookie mistake in attaching the bottom connectors as they are misaligned with my 7070 male pins and won’t...
  4. T

    Sansui 7070 Safety Relay Not Turning On

    Have a 7070 that powers on, with lamps functional, but speaker safety relay will not engage. Have gone through, some of the earlier threads on this and there is much good information, that has helped. First off, the output transistors were tested and are good. Noticed that removing the F-2624...
  5. T

    Sansui 7070 Receiver Phono Input Selector

    Hello, Have a question for any Sansui 7070 owners out there. Picked one up a couple of weeks back and there is something odd with phono section. Only the phono 2 input works and the wires to the phono 1 back of panel connector are cut. The wring for the front Phono 1 and Phono 2 PB selector...
  6. S

    Sansui 7070 High Bias and DC Voltage

    So I've been working on a Sansui 7070 I just found in a barn. The relay didn't click when I got it so I replaced the fuse resistors on the driver board F2624. I then replaced four transistors that tested bad on the same board. I had no problems after this and it sounded pretty good. I set the DC...
  7. amason2308

    Sansui 7070 no power, please help

    Hi, long time lurker, first time poster here. I’ve had a Sansui 7070 for about 7 years, with it hooked up to a laptop + projector as part of our family home theatre setup. Though I don’t think I have speakers that match very well (90s Polks) I’ve always loved this receiver. Unfortunately my kids...
  8. jpreza

    Help with Sansui 7070 Receiver

    Good afternoon everyone! I just reached out to a seller that has a working Sansui 7070 receiver. He said he is the original owner. The receiver had some work, specifically one of the main filter caps was replaced many years ago when one of the channels went out. Besides that, he said it's...
  9. kennycrippen

    Sansui 7070 Speaker Select switch replacement

    I have a spare Sansui 7070 I ordered from eBay quite a number of years ago. When it arrived the speaker selector switch was badly bent. UPS Insurance reimbursed the cost so it was free. After it sitting in the basement for 8 years or so I dug it out and fired it up yesterday and it works and...
  10. mozcho

    Tiny Cables Inside the Amp

    I was thinking of using some thicker speaker cables (up to 12 or 14 awg) to get better sound, but when I opened up my vintage receiver (Sansui 7070), what I saw were 4 very tiny cables feeding the speaker A and B terminals (top left corner). Would it be futile to use speakers cables that are...
  11. M

    Sansui 7070

    Hey guys new to this forum. I'm looking for some help to try and fix my beloved sansui 7070. The bugger just plumb stopped working one day. I used to turn it on then like 7 seconds later the sound would kick on. Now when I turn it on it doesn't click and theres no sound to any speakers anymore...
  12. T

    Marantz 2220b and Klipsch Fortes

    Just got this little Marantz 2220b running again a couple of days ago, thanks to the good information I got from researching threads here on AK. I got it adjusted in and tried it out on some cheap test speakers. I gave it a good long test run. It played well and didn't get hot or otherwise...
  13. P

    Sansui 7070 ... Right Channel Static ... midrange makes it louder / softer

    Hello! First timer here Problem w my Sansui 7070. Has worked well for a few years but now hearing a CONSTANT static / noise in the right channel, of moderate volume. Nothing I've tried has ANY effect on it, EXCEPT for the midrange control ... when I adjust the midrange, the sound smoothly...
  14. P

    Sansui 7070 ... Right Channel Static ... midrange acts as volume

    Hello! First timer here Problem w my Sansui 7070. Has worked well for a few years but now hearing a CONSTANT static / noise in the right channel, of moderate volume. Nothing I've tried has ANY effect on it, except for the midrange control ... when I adjust the midrange, the sound smoothly...
  15. S

    New from Louisiana

    Hey guys, finally joined, I’m looking to work on a few nice pieces I have, and here seems the place to get knowledge. I’m 48 and worked as a technician for several years, also a guitarist and I’ve maintained some vintage tube guitar amps and even built and modified one from a kit. Also built...
  16. DirtyDog

    Sansui 7070 sounds garbled until it warms up!

    Hi, I just purchased my second Sansui. A 7070 which I am really enjoying. One quick questions for the experts: Everything sounds great after about a minute of warming up, but initially, after the protection relay kicks in, the sound is a little bit garbled. Is this normal? What could cause...
  17. Gumbee

    Save new family members

    Today I welcome my first Marantz and Sansui receivers to my family (growing addiction to vintage audio) Sansui 7070 and Marantz 2270.
  18. BobEDigital

    Sansui 7070 helllllp

    hey guys, I was replacing some lamps on my 7070 and whoever initially replaced them... whooofda. I'll have pictures at the bottom. Essentially they soldered the lamp ends shut and used wires to light bulbs. I clipped them out and was putting the new ones in one at a time and clearing old...
  19. dbrown

    Sansui 7070 Intermittent Alien Noises

    Hello, I love this site - never buy anything without reading the opinions of member here first. Thank you. My beloved Sansui 7070 developed some unusual noises this year: - Alien-like electronic sound - Intermittent - every few - Very quiet (have to listen for it or be in a quiet room) - Not...
  20. D

    Sansui 7070 Transformer issues?

    Hello all. I picked up a 7070 and the local thrift show for $30. It powers on, but all the lights flicker and I cannot get any sound. Power meters don't budge a millimeter. In one instance the flickering stopped, but still no sound. Lights appeared to be somewhat dim to my eye. I am hearing...
  21. M

    Yamaha CA-810 vs Sansui 7070

    Hi Which amp is better as vinyl amp out of the twos? Sansui 7070 is ofcourse as per market trend about 100 bucks more than Yamaha but i have read really good reviews about ca 810 but no comparison with similar budget amps of Sansui... Any advice will be helpful. Thanks
  22. M

    Yamaha R-900, Sansui G 3500 and 7070 comparison

    Hi I hope I am not comparing apples and oranges. The reason I am comparing is cos of all three are available for reasonable prices with Yamaha the cheapest. Sansui's market rate are already high in general, regardless of its model. I am more inclined for Sansui 7070 which is available for about...
  23. hensur

    Sansui 7070 no sound

    Hello, I'm new to this forum because I'm trying to fix my dads old Sansui 7070 receiver. He also had two ESS Speakers which he gave to restoration a week ago. So I tried to get the amplifier he bought with them to work again. He told me it was laying in the basement since it stopped working...
Back
Top Bottom