• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

subwoofer

  1. N

    How to wire a single voice coil driver to a dual voice coil sub...

    Hi guys. So I've looked all over the internets on this one and I haven't been able to turn up much. Here's the situation. I have an old junky Sherwood sub that sounds pretty bad. I also have an orphan RBH bookshelf speaker that sounds pretty good. It turns out the RBH was a prototype...
  2. R

    Klipsch RPW-10 - Powers ON, allows speaker pass-through, no sound outputting

    Hello all, I am currently running a Denon AVR-2802 with a pair of Paradigm Reference Studio 60v3's. I am bi-amping these speakers through the 5-channel stereo mode (FR,FL, SR,SL). I have a Mirage LF-100 sub-woofer that I plan to dual sub with the RPW-10. Now to the problem: The RPW10 powers on...
  3. jonnyz123

    Custom Switch For Center Speaker

    I have a 500C connecting to a sub from the center speaker terminals. Problem is that I want to cancel that signal to the sub when listening to earphones, or “Speaker 2” (connected to 500C but in different room than sub). Unlike my 202B, there’s no center channel switch built into the 500C...
  4. jonnyz123

    500C + Subwoofer Advice

    Hi all. Just had a 500C repaired and it sounds great. About bass response and potentially hooking up a subwoofer. My first question is about the need for a sub. I have a pair of Monitor Audio BX2's. They do the job, but lack bass, so with my previous X-202-B I was using an SVS SB1000 from...
  5. J

    Loudest Sealed Subwoofer with Denon AVR 1507

    Hello everyone. I'm trying to build myself a large subwoofer for my home audio system. I want to build the most powerful subwoofer I can with the amp I already have. The Denon AVR-1507 (specs here https://www.cnet.com/products/denon-avr-1507/specs/) is the current amp I use for my two speakers...
  6. Cody AOC

    Questions about Subwoofer Enclosure building

    Hi So I want to build a enclosure for my NVX Vcw 154 I will be using it in my house for music yes I know it's a car subwoofer but I already love the sound of it I want to tune it @ 30hz. It has to be kinda like a home theater subwoofer kinda size I thought about doing a 3 cu ft size and a slot...
  7. ScooterMcTav

    Subwoofer Plate amp shot - Options?

    So a few months back I picked up a PSB Subsonic 6i locally, purchased with the knowledge it is not working. After ordering parts, and paying my local electronics guy to solder them on, it is still not working - likely as the crummy glue smeared everywhere is causing continued shorts somewhere...
  8. JordanVA

    New Budget System

    Hello AK! After trying many configurations in my new apartment I decided it'd be simpler to save up for new speakers than to try to make everything fit. After I made that decision, I decided to shoot for an entirely new setup. It will be for music and movies, but as far as sound preferences...
  9. B

    Need guidance on best way to amp (2) A/D/S SB10 woofers

    So I have been the proud owner of two A/D/S SB10 10 in subs that are mounted in their factory made box. I have been using them at home with a 5.1 receiver and love the bass they deliver. I would like to hear their max potential in my car but have found it difficult to find qualified...
  10. amr2

    Subwoofer JBL

    Hello I'm planning to build something with my JBL W15GTI, for music and movies. For reason of space, I need a compact box, so I'm going to use a sealed enclosure with EQ to increase the low frequency response to 25Hz. I have used this on other occasions and I like the result. This is only a...
  11. C

    Best way to add a subwoofer without a sub out

    Hi everyone, I recently pick us a pair of Infinty Primus 250 speakers at my local SA. After putting new tweeters and x overs in them they sound great! On some records though I feel like I'm missing just a bit of low end extension and I'm interested in adding a subwoofer to my setup. I use a...
  12. G

    DIY remote bass knob

    I want to put together a wired bass controls for my Klipsch powered subwoofer. Just a knob to control level and crossover, just like you do on the back of the unit. I'll probably just replace the pots. To my knowledge, this doesn't exist as a product I could buy. Anyone have any luck doing...
  13. D

    Are front speaker subwoofers pointless when paired with a dedicated subwoofer?

    I'm newly getting into audio and this is my first post here. I have a 5.1 system set up currently and I have a question about how the subwoofers work with the front bookshelf speakers. I've done research to find an answer but it seems like a pretty obvious question that I can't find a...
  14. Cody AOC

    How should I ported this Dayton Audio enclosure?

    Greetings all I want to port the Denovo Audio Knock-Down MDF 4.0 cu. ft. Subwoofer Cabinet with Blank Baffle, and I seen people saying they were porting it with Aero Ports and I thought that it would be a easy way to port this sealed enclosure well I want to tune it between 28-30 hz. I wanted to...
  15. kjello

    How to fix transformer noise

    Hi I have a small problem with my subwoofer amplifier. Its a Zachry DSW-400 mono plate amplifier The problem is noise, which I belive comes from the transformer. When I turn the power on, the noise is audible, and when the speaker relay switches on the noise gets amplified through the woofer...
  16. I

    Subwoofer connections?

    I'm looking into upgrading from a Logitech Z906 surround sound system to a Denon AVR-S920W based system, primarily for the HDMI inputs/switching, although any improvement in sound quality is, of course, a nice bonus. I'd like a little clarification, however, when it comes to subwoofers and how...
  17. TellMeWhy

    Passive Subwoofer question Canton Plus C

    Hi all. I have a Canton Plus C passive subwoofer that is designed to be only used with dedicated Plus S satellites. The crossover is wired internally with a 120hz crossover (would like to change that to 80hz) and results in a 4 ohm load when the sats are connected. I would like to be able to use...
  18. Ed Dumas

    Looking for Energy EPS-12 Service Manual

    I am wanting to do some basic repairs to an Energy EPS-12 Subwoofer. It has an auto-off function and does not always shut off as it should. I am going to do a basic recap on it while I am inside. I also just found a trimmer on the circuit board, so would like to know the settings for that little...
  19. S

    Subwoofer to go with Energy Pro 22s

    Hey all, I recently got a clean pair of Energy Pro 22's and hooked them up in my living room. They sound great! I was wondering what subwoofer would match up well with these in a small room? These are doubling as both my music/theater rig. My living room is 12' x 20' Split level; open floor...
  20. MitchellT

    Driving Bookshelf and Sub w/ late 70's refurbed Marantz

    Hi all, I have been thinking about buying a 12" PSB subwoofer to compliment a pair of older PSB Alpha a/v's I received while helping a family friend move. The Alpha A/v's are already 6ohm impedence.. the subwoofer is 4ohm (nom and minimal)... I know I am getting into territory here that may...
  21. MitchellT

    PSB Century Subsonic 2i Price Question

    Hi all, I found a "local" ad for a 2006 PSB Century Subsonic 2i sub (12" forward firing, bass reflex) for $150 in perfect cosmetic and working condition. Let's assume it is in perfect condition, and I need to drive 1.5 hours to get it. Am I overpaying or should I hold off? I found this...
  22. Cody AOC

    Can I reverse the polarity when in bridged mode?

    So I have a subwoofer that is dual voice coil and I want to reverse the polarity on my subwoofer because that's the way I like my subwoofers sounding and so my amplifier will put out more than enough power at bridged mode @ 4 ohms and I wanted to know how would I do this the reverse the polarity...
  23. Cody AOC

    Crown XLS 1502 Running @ 2 ohms?

    Should I use my crown xls 1502 @ 2 ohms it is rated down to 2 ohms but some people say that it might make too much heat @ that 2 ohm load well I have been wanting to use it with my subwoofer that is rated 1250 watts RMS but that's the whole subwoofer it's a dual voice coil subwoofer so that cut...
  24. LordLunatic

    Vincent LS-112 Subwoofer - Has anyone heard it?

    I'm considering buying one at a good price, because it looks rather interesting, at 42kg! But a bit low powered at 150watt comparatively.... And I can't seem to find anyone talking about it? Has anyone seen or heard one in the wild? Also the LS-208 stand mounted speakers... Same story.
  25. Cody AOC

    Skar Audio or NVX Audio?

    Should I go with Skar Audio or NVX Audio? to be exactly what subwoofers that I thought on my budget most willing to spend $230 I already have everything else for my setup just what sounds the very best Skar EVL-15 or the NVX VCW 152? Sound quality is my main concern here's the links...
Back
Top Bottom