Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
Yesterday I acquired this Zenith C587, AM/FM/Phono. It has RCA jacks for Tape on the back and a headphone jack, too. It was in the same family since it was purchased around 1973, if I recall the dates correctly, and I had repaired it for the son of the original purchaser. After enjoying it once...
Hi there! Following up on my past thread here: https://audiokarma.org/forums/index.php?threads/adding-switch-and-line-input-to-zenith-mk2068-console.975293/
My grandparent’s Zenith console is doing well! I ended up going with the switch between the Preamp output and 3.5mm connection for an...
Hi all,
Title says it all. Found an old Zenith radio that looks pretty good. Replaced the caps and it’s singing!
However I have three issues:
1) The FM, AM, FM AmC switch is kinda bad. Any tips on replacing, / could I wire it just to FM?
2) I’d like to add a led to the tuning dial that...
Hello all, long time lurker first time poster.
I have a 1975 Zenith Allegro Quad that i'm attempting to get some External Speakers on.
(Chassis 15WFR51)
Setup: Zenith Record Console EXT Speaker RCA out's -> 100ft RCA -> Aiyima A08 Pro Amp -> Bose 301 Series 2.
Issue: When the EXT RCA (L)...
Hi All:
so I stumbled over a rare find: a Zenth Circle of Sound A589. It needs a little work so I am hunting for manuals etc.
Does anyone have these manuals or a source for them?
Thanks
Hello everyone!
I have a 1964 zenith console stereo with a tube preamp and solid-state amp. I’m redoing it for a buddy of mine. When he brought it to me I opened it up cleaned and lubed all pots and switches. Replaced all the burnout lamps with warm white LEDs and installed a DAC to the tape-in...
Hello,
I’m seeking the wise words of all the Zenith heads out there.
I recently acquired a small box with Zenith oval 49CZ902 and two 49-978 tweeters.
No crossovers. Picture attached.
Do I keep, sell, praise the Zenith lords for the score of a lifetime, run in on Rekkrs mono?
Thanks y’all!
Dane
Hi everyone! First time poster. I’ve got a bit of a project on my hands. I picked up a Zenith RN2601 console from Facebook marketplace and of course, it has problems. The left channel is out, the audio is extremely quiet(about the volume of an iPhone), and it has virtually no bass. FM, AM, and...
My Zenith console has a problem where 1 or 2 of the speakers crackle / cut in and out when I adjust the volume. Is this a problem with the speakers or the volume control? Everything else works great but as it is now it’s unusable. Can the volume control be cleaned? Can the speakers be replaced...
Hey! Got this vintage receiver Samsung SS-3350 in really nice shape. When tested had no output. Opened it up, did a recap to the main power amp PCB and to the tone control board (will probably recap the preamp input section which is in the tuning board, once I get this issue sorted out). Two...
Hello everyone,
A year ago, I purchased this Zenith stereo system primarily for the radio functionality, but I was also intrigued by the record player. Although I've received vinyl records as gifts in the past, I've never actually owned a record player before and have had very little personal...
Hello everyone,
First let me say that I am very new to audio and tube based electronics. With that said, I recently recapped my first tube amp and preamp in a 59 Zenith SFD220. I also replaced every resistor as there were many pretty far out of spec. This is the "weird" Zenith, as I have come...
Regarding the Captioned turntable and attached photo, I am asking if anyone knows where a small part goes. The part rests on my finger.The part is a flat piece of metal. I think it goes on top of bracket marked 1, interconnected by the front spring in the middle. In the right photo, is where I...
For the past few years, I was on the search for a Micro-Touch 2G tonearm-equipped Zenith portable, and a week ago, that opportunity came when I saw a Nomad II on shopgoodwill and was able to win it for the starting bid of $6.95 (total was $25 after shipping/handling).
Sure, it has a BSR...
Hello. New here. Recently acquired a Zenith X930 vintage stereo console, which seems to be c. 1967 based on internet research. Turntable runs about 6% slow. Wondering if anyone can point me towards a resource for DYI fix, or someone relatively near western MA who might make a house call. It...
Hello,
I have a Zenith MN2604 I purchased from the non-original owner.
On the back, the label reads: Model MN2604 Chassis 8NT02 7L01Z1.
The system's radio and speakers function (albeit with some minor static).
I am posting here because I am looking for help diagnosing an issue with the...
I picked up this cabinet unit today and it powers up but It won’t get any radio signal. Any tips on troubleshooting? I haven’t gotten around to opening it up yet to get everything cleaned up. Also anyone have an idea on how old it is? Thanks!
Hello,
Recently picked up a Zenith X940 Stereo Console. It's in great shape, all original and sounds great to me. Still need to clean up the finish (fill-in a few small dings, polish, etc). I posted images from when I purchased it. I will post new once clean-up is complete. I am now very...
Howdy,
I've finshed restoring my grandparent's 1962 Zenith MK2068 Stereo console, it has a 9H20LZ1 preamplifier/tuner and a 5k29 amplifier. The Preamplifier connects to the Amplifier with what looks like an XLR connection, but it's a left and right signal with ground connection.
(Posted it...
Hello.
Is there any turntable speed adjustment on an old Zenith console stereo. Mine is spinning at 37-38 RPM. Any info would be helpful.
This stereo has been in my family since brand new and is perfect except for the fast turntable.
thank you.
I love odd old speakers so when I saw a pair of these at Goodwill today without a price I took them up to the counter and got them for $20. Not great but the hobby time is worth it.
My first listen was surprising. They sounded quite good. I opened them up to recap them and they had 4 uf...
Hey everybody... I inherited a late 70s/early 80s Zenith turntable/8 track console in outstanding condition. I already rebuilt and tuned up the BSR. 8 track works like a champ. Not the highest end model by any means but my 12 year old daughter got introduced to vintage vinyl and she's obsessed...
I have a vintage zenith alegro console with a BSR turntable. I want to upgrade the turntable but use the same power and switch. The bsr has standard rca phono connectioions but three wires for the power. Can anyone help me identify the purpose of the three wires and how to connect to a component...
So, I picked up this great Zenith SFD2560 that still had the manual, all the paper on the turntable. The thing looked to be in great shape. It was stored carelessly and had a little damage visible externally, but upon bringing it home and opening it up, I realized this place had been a mouse...