• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

crossover

  1. P

    CS-63DX crossover wired incorrectly?

    I recently acquired a pair of CS-63DX speakers. When I took them apart to examine the crossovers, I noticed wiring which seems to be inconsistent with the schematics I found online. It appears as if the "supertweeter" horn tweeter is connected to the tweeter circuit, while the tweeters are...
  2. H

    Cerwin Vega DX-9 crossover repair

    I have a pair of CV DX9 and I wanted to repair the crossovers on them. I'm looking to do a complete rebuild of the board. I've got the skills to solder the board back together, but I am clueless on what to buy for the parts and need help figuring out which parts are the best overall. I also need...
    • HoneyBadger9
    • Thread
    • cerwin vega crossover dx-9 repair
    • Replies: 2
    • Forum: DIY
  3. L

    My expectations Bose 901 and setup

    I’ve had a pair of 901s for many years powered by my Pioneer sx950. I have the equalizer connected correct via manual instructions and it sounds decent. But like they say dissatisfied with lows and highs. I must’ve been drinking when I decided to buy a Pioneer 3 way crossover just...
  4. J

    BOSE 601 Series ii crossover (only one Resistor and Capacitor in Xover )

    hello Bose enthusiasts, Anyone who rebuilt the Xover could indicate if this makes sense to them ? Perhaps the Xover were modified, i have no way to know but am strating to suspect they might have been. But maybe not, might be a leaner version of the network. Eager to hear from anyone who has...
    • Jpkwd
    • Thread
    • 601 bose capacitor crossover dayton audio rebuild replacement series 2 series ii speaker
    • Replies: 7
    • Forum: Speakers
  5. V

    How can I Determine Frequency Divider connections?

    I am seeking a way to determine which output terminals of speaker crossover networks feed which components. So, what I have is a set of 3-way frequency dividing crossovers, but I need to figure out which wires should attach to which driver components. There are no indications on the boards as to...
    • valentiner61
    • Thread
    • connections crossover driver speaker wiring
    • Replies: 14
    • Forum: Speakers
  6. Black.Audio.Co

    ADS L810 Speaker Help Requested

    Hi Friends, I have acquired a pretty good ADS 810 speaker and am happy with the sound and plan to keep it in my secondary system. I would like to ask help for the following: 1. The Speaker binding posts on the back of one speaker are loose and i would like to tighten them. I tried to remove...
    • Black.Audio.Co
    • Thread
    • ads l810 ads speakers braun braun speakers crossover
    • Replies: 2
    • Forum: Speakers
  7. A

    noob question crossover ditton 15xr

    Hi all Sorry for my poor English. I am just exploring this new hobby. I want to give some new life to my Celestion ditton 15XR speakers and learn something in the proces. The sound of the tweeter is harsh. Soft music like piano is good, but Queen for example is a audiophile mess. The human...
    • Axelleke
    • Thread
    • crossover recap and restoration
    • Replies: 9
    • Forum: Speakers
  8. flyingfinn

    Vintage Magnavox bookshelf questions

    I've recently acquired a pair of Magnavox S-8753's as part of a bulk electronics purchase. It could be a score. I'm not sure of the value. They have a 16 ohm 8" woof with alnico magnets, but the original paper 3.5" tweets have been replaced with some vintage Radio Shack 40-1276B domes, which...
    • flyingfinn
    • Thread
    • crossover tweeter replacement vintage
    • Replies: 1
    • Forum: Speakers
  9. H

    Cerwin Vega DX9 Crossover

    I just recently got ahold of some CV DX9's and they are in need of some work. I am looking to completely rebuild the crossovers on them as there are some missing pieces on the board, alongside what looks like broken coils on them. I was curious as to if a full rebuild was possible or if I would...
    • HoneyBadger9
    • Thread
    • cerwin vega crossover crossover mod dx-9
    • Replies: 2
    • Forum: Speakers
  10. polhem

    Two different amps -> crossover filter -> speakers ???

    Two different amps -> crossover filter -> speakers ??? Hi all, I am wondering if this connections can be done: Receiver --2 x RCA-> NAD 3020i -2 x speaker cable--> Post amp crossover filter -2 x speaker cables-> Speakers \--2 x RCA-> NAD 319 -2 x speaker cable --/ I hope my...
    • polhem
    • Thread
    • amplifiers amps crossover crossover filter filter multiple amps nad nad 3020 nad 3020i nad 319
    • Replies: 3
    • Forum: Solid State
  11. C

    Restoration of Acoustic Research AR3 Speakers

    So I fairly recently obtained a pair of AR3 speakers that were in pretty bad shape and, with the generous support of members on this forum and a few other sources (more on that later) I managed to restore them to what I feel is a good representation of their former glory. I wanted to share my...
    • Cropper
    • Thread
    • acoustic research ar3 cabinet crossover diy recap refinish repair restoration speakers
    • Replies: 31
    • Forum: DIY
  12. nickdinatale

    Anyone ever do a JBL N1200 DIY build? (Another 3-way JBL thread)

    I'm working on putting together a 3-way JBL system in a pair of C34 cabinets that I'm close to finishing up. It would look something like: 130A, 175/2410, and 075. At the moment, I only have a single N1200 crossover and the prices for a second are leading me to consider just building my own and...
  13. WillMeyer

    Advent Legacy I

    I have a set of Advent Legacies the I just picked up. Of course it needed new foams and that is in process. I'm a fan of the Jensen era Advents. I think they are good speakers and with just a little bit of tweeking become a much better speaker. I've done a bunch of work on the Heritage...
  14. SanMarantz

    Is this an original ESS Transtatic I crossover?

    Hello all, Just purchased a pair of ESS Transtatic I's. They are the most amazing speakers I've ever heard. Someone replaced the original tweeters with some Peerless tweeters. It looks like they kept the Kef racetrack woofers and mid-ranges. There is no wall cord and some of the ones I have seen...
    • SanMarantz
    • Thread
    • crossover ess transtatic i identify kef peerless racetrack
    • Replies: 11
    • Forum: Speakers
  15. Kingsin7

    Werner Jagusch Crossover Schematic?

    Hey AK I purchased some custom solid teak speaker cabs that already had a Werner Jagusch 2-way XO installed. They were bought to accommodate my Altec 288-8G and 515B drivers. I had a buddy come over with a directional mic, pink noise generator and some software installed on his laptop to try...
    • Kingsin7
    • Thread
    • altec cabinet design cabinets crossover ports xover
    • Replies: 4
    • Forum: Speakers
  16. Leestereo

    Tale of Two Minimus 7s Sets

    With 2 sets of nearly identical Minimus-7 speakers on hand, the opportunity to modify one set and compare it with the other made for a small and fun long-weekend (Victoria Day in Canada) project. Both Minimus-7 speaker pairs are the 40-2030B variant: one is from January 1984 (1A4 date code) and...
    • Leestereo
    • Thread
    • crossover minimus 7 pz2.2 realistic
    • Replies: 6
    • Forum: Speakers
  17. Jumanjii1

    Infinity Infinitesimal 0.1 Crossover Re-Capping

    Hi everybody, What's the story on re-capping crossovers on these speakers? Has anyone done it and where did you get the parts? I'm having a hard time locating these 1200 and 700uF 50 volt capacitors. I guess they're non polarized and that's what the schematic reads. One speaker has very little...
    • Jumanjii1
    • Thread
    • crossover infinitesimal 0.1 infinity re-capping
    • Replies: 18
    • Forum: Speakers
  18. FireGuruMN

    Magnepan MGII Repair/Restore, Glue, Glue and more Glue

    I bought a pair of MGII last fall on CL for $200.00 with known issues. They sat around during the winter because there was no way quality control would allow stinky glue in the house. I once finished off an entire office with Victorian woodwork, built in shelves, wood ceiling and did all the...
    • FireGuruMN
    • Thread
    • capacitor crossover delamination finishing glue magnepan mg2 mgii restoration stands
    • Replies: 21
    • Forum: Speakers
  19. FireGuruMN

    JBL 4435 Recap and Mods with a Little Help from the Easter Bunny

    I have another thread in the "Lansing Legacy" about these speakers also: https://audiokarma.org/forums/index.php?threads/jbl-4435-bucket-list-countdown.901225/ That thread talks about positioning and replacing the diaphragms in the horns. The executive summary: Position them wherever they will...
    • FireGuruMN
    • Thread
    • 4435 capacitor crossover jbl resistor speaker vintage
    • Replies: 16
    • Forum: Speakers
  20. Leestereo

    New KLH 20 Crossover with WIMA Film Capacitors

    The crossovers in a pair of KLH 20 speakers were restored/upgraded with WIMA MKS2 capacitors. The KLH 20 speaker is essentially a KLH 17 speaker with a 4 ohm woofer and share the same crossover. Whereas the KLH 17 was sold separately, the KLH 20 speakers were part of the KLH Model 20 Music...
    • Leestereo
    • Thread
    • capacitors crossover klh 17 klh 20 klh seventeen klh twenty wima
    • Replies: 9
    • Forum: Speakers
  21. Zack Sainz

    KLH 5 Guided Recap - Early Version - PDF

    Hey all! This is my first recap job, be nice, lol. Attached is a document guiding those who need help with their KLH 5 Recap. GD70 recommended that I take photos and share my with everyone, but since this community has been so helpful to me I decided to make a detailed doc for those who are...
    • Zack Sainz
    • Thread
    • capacitor crossover diy fix how to klh klh 5 pdf recap refurb
    • Replies: 3
    • Forum: Speakers
  22. FireGuruMN

    KLH Model Twelve, Five Pounds of Capacitors into a Four Pound box.

    I got these off CL last Fall. $200.00 since you asked. Had to hide them in garage until the time was right. You've all been there. I still need to refinish the cabinets. They have a bit of a milky look to them and I like crisp grain. The contour box (crossover) has nice crisp grain and...
    • FireGuruMN
    • Thread
    • capacitor coutour box crossover klh model 12 model twelve speaker vintage
    • Replies: 25
    • Forum: Speakers
  23. FireGuruMN

    Klipsch Heresy I Restore, oh no not another one.

    I got a set of original Heresy's a couple of years ago. When I got them I hooked them up and they were unimpressive. I was hoping for 1980's boomy base to shake the room and that was not there. It never will be there until you buy Heresy IV's (or so I have heard). I Googled and Googled and...
    • FireGuruMN
    • Thread
    • capacitor crossover heresy inductor klipsch recap schematic
    • Replies: 9
    • Forum: Speakers
  24. Zack Sainz

    KLH 5 knob removal

    Hello gang! I’m trying to get this crossover out so I can work on it. I can’t for the life of me get the knobs off the back. Any tips?
    • Zack Sainz
    • Thread
    • cross overs crossover klh 5 klh 5 crossovers removal
    • Replies: 9
    • Forum: Speakers
  25. FireGuruMN

    Polk Monitor 10 Capacitor Replacement

    I got this pair of of Polk Monitor 10's on CL for $50.00 plus a rather long drive. But it was Fall and long drives are nice along the river in the Minnesota Fall. I was sort of just after the stands. But I got them home and thought the drivers looked a whole lot like the drivers in my...
    • FireGuruMN
    • Thread
    • crossover monitor 10 polk rdo194 recap restoration sl2000 wire bending took
    • Replies: 5
    • Forum: Speakers
Back
Top Bottom