• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

integrated amp

  1. wmac

    2 more Sansui AU-X1 for restoration

    Next month, I will receive 2 Sansui AU-X1 for restoration: the first one, the vendor said, is not powering on, and the second, the vendor states that it is smoking. Well, it is going to be a challenge, but I can touch them after the middle of October. I will need to send both of them to Power...
  2. colegget

    Dead Technics SU-V6X?

    Hi all, Hoping to get some information to get a Technics SU-V6X up and running again. I found it in a box after several years and used it for a few days without an issue (the left channel was iffy on the main speaker input but the remote input worked fine so I just used that). When I went to...
  3. D

    Amp to pair with lintons?

    Looking into purchasing some Wharfedale Lintons as part of my hifi setup, though I’m a bit torn with what integrated amplifier to use with them. I prefer something that has detail with punch and warmth. I’ve been considering a Yamaha A-S801 (which seems to be a perfect combo for many folks) but...
    • dnova93
    • Thread
    • integrated amp solid state speakers speakers & amps sv236 tube vincent audio wharfedale linton yamaha as801
    • Replies: 2
    • Forum: Solid State
  4. N

    Help Troubleshoot Issues With Sony TA-AX390

    Hi AK - This is my first post so please let me know if there's anything missing or if it needs to go in a different section of the forum. I picked up a Sony TA-AX390 integrated stereo amplifier last spring and have had it for a few months now. I got it for a good deal alongside a separate tuner...
    • nsdigirolamo
    • Thread
    • amp amplifier help integrated amp integrated amp help sony sony ta-ax390 ta-ax390
    • Replies: 2
    • Forum: Solid State
  5. vferdman

    Technics Integrated Amp SU-Z760 vs. SU-V76

    I am not sure if this is the appropriate place for this thread. I hope so. I am looking for some info and possibly a source of service manual (hifi engine did not have it) for a Technics SU-Z760 integrated amp. I scored it for next to nothing on a tag sale and there is really nothing wrong with...
  6. E

    took a gamble on a MAC 1700 from ebay. I feel..... hopeful

    Just took a gamble on this MAC 1700. I've been really curious It is somewhat untested but lamps work, buyer stated fm works with headphones but doesnt have equipment to test speakers or other stages so im taking a big chance on an old receiver. I'm gonna pray. Seller accepted an offer of $450...
  7. Raphaz

    Going from a Yamaha R-2000 to an integrated amp

    I currently own a R-2000 (well restored). Had it for nearly two decades. I like the SQ, it’s unforgivingly detailed and clear in all frequency ranges, even at lower volumes, and has enough umph to power my large, open, heigh ceiling loft space. I recently changed things a bit and added Wiims...
  8. SX828POWER

    Kenwood KA 8004 Restored - But Sounds AWFUL! (with pics)

    Good evening Ak'ers, I have been doing quite a bunch of reading on this machine and I have finally decided its worth reaching out for some help with the issue I am having. I picked up an absolutely perfect condition Kenwood KA-8004 integrated amplifier last year for little more than the cost of...
  9. B

    Missing ma6100 volume pot

    Hi guys, I have recentlly acquired an unfuncioning Mcintosh ma6100. I have dissasemblled the unit and it seems that the only thing wrong is that it’s missing the volume pot (apart the missing front glass). The problem is that i can’t find the volume pot anywhere on the internet. Is there any...
    • borke
    • Thread
    • integrated amp integrated amp help integrated amplfier ma6100 mcintosh volume control
    • Replies: 10
    • Forum: McIntosh Audio
  10. M

    Looking for Advice

    I recently purchased a vintage integrated amp from a long time AK'er (on Barter Town) that was advertised as fully restored and working. I offered full asking price, which was accepted by the seller. I received the amp in good condition and played it several times for less than an hour each time...
    • msobeldc
    • Thread
    • barter town integrated amp not working
    • Replies: 8
    • Forum: Feedback
  11. O

    Technics su-vx820 , improving sound ?

    Good evening, I have a Technics SU-VX820 amplifier, which I currently use in power amp direct mode, as it seems to sound the best this way, but I still feel like something is missing. I also own a Nikko TRM 750, but I'm not sure if it needs servicing (changing capacitors, etc.). The speakers I'm...
  12. Ivan T

    Technics SU 8080 Channel Imbalance Problem (Left Channel Is Quieter Than Right Channel)

    I have the Technics SU 8080 integrated amp with a channel imbalance problem - left channel is quieter than right channel even if I run it in power amp mode. All electrolytics (except power supply ones) have been replaced with Panasonic FCs, FRs, Elna Silmic IIs and some Nichikons, depending on...
    • Ivan T
    • Thread
    • dc amp integrated amp su 8080 technics
    • Replies: 2
    • Forum: Solid State
  13. D

    Best integrated amp with phono stage for $1000 or less?

    I had recently purchased a vintage Luxman L80V on recommendation from a friend and the unit arrived not fully functional. I was luckily able to return it and now I’m back to square one. I spoke with a salesman of a reputable hifi shop over the phone and he recommended a Yamaha AS701 as a good...
  14. J

    Bi-amp with integrated amp and receiver (which is best?)

    Hello everyone, I’ve recently acquired a set of R-series, R11’s for front, R2C for center and R3’s for surrounds. Subwoofer will come later, but for now that’s it. I have used a Yamaha A-S1100 integrated amp for stereo listening for about a few months before also going surround. As a result I...
  15. Chaostoday

    Recommend step up Transformer

    I have a Denon PMA-600NE that has a Euro plug. I have brought it back over here to the states and understand that I have to use a step up transformer to give it the 230V it requires. Would love to have some solid suggestions on what to use to run this integrated amp safely. I have read that...
  16. T

    Receiver or integrated amp for KEF 101s?

    So, first post from a relative newbie here. I just inherited a pair of old KEF 101 SP1122s from my dad. They need the usual work for KEFs of this age (recapping/crossover rebuild) but assuming that can be done, I would really like to use them. The question is what receiver or amp I need to...
  17. E

    EICO 2036

    Hi everyone, I picked up an EICO 2036 recently (my first tube amp), and I've had a hard time sourcing material. Best I've found was a schematic (which idk how to read too well), and a catalog from 1964. Anyone have access to a service manual? I would like some literature on the unit before...
  18. M50'sMike

    Do I need to upgrade my receiver for my new speakers?

    Hey Everybody, Just purchased some JBL Synthesis Array 1000's to take the place of my JBL L166 Horizons, I've noticed there's not a whole lot of info on them, mainly the 1400's but nevertheless. One thing that seems to be apparent is that they will be more revealing than the l166's. So I am...
  19. M50'sMike

    3.1 Receiver upgrade for HT and 2.1ch listening

    Hey Everybody, Just purchased some JBL Synthesis Array 1000's to take the place of my JBL L166 Horizons, I've noticed there's not a whole lot of info on them, mainly the 1400's but nevertheless. One thing that seems to be apparent is that they will be more revealing than the l166's. So I am...
  20. sae-7125

    rega mira: were they all this bad

    speaking from a longevity and manufacturing quality point of view, or lack there of. owner complained of intermittent operation and eventually dropping out. not to mention the missing rca jack negative/ground. single sided for soldering, mostly, even though traces on both sides of the pcb...
    • sae-7125
    • Thread
    • anti-longevity bad design integrated amp rega solder joints thermal stress
    • Replies: 6
    • Forum: Solid State
  21. Levi8000

    Yamaha A-6a / A-760II No power

    Hi everyone a couple of weeks ago I got a Yamaha A-6a (Japan version of the A-760II) and it has no power! I opened it up and replaced all the capacitors on the main board, the B supply voltage was only 1.4v all the voltage readings coming off of the power supply board are fine. Except the...
    • Levi8000
    • Thread
    • diagnose diy integrated amp yamaha
    • Replies: 42
    • Forum: Yamaha
  22. E

    Can dirty or corroded contacts cause channels to drop? NAD C370 help

    I thought about bringing this thread back to life due to Jerry's great advice in there, so let me know if I should post in there as well. I have a NAD C370 integrated that I bought used about a year ago. I love this amp. This past week the left channel has dropped out. Occasionally it pops back...
    • ewoods
    • Thread
    • channel drop out integrated integrated amp nad nad c370
    • Replies: 11
    • Forum: Solid State
  23. aphex_nsw

    Philips Fisheye 22RH520/22RH550 troubleshooting questions

    Hello all, I've recently been digging back into a bunch of old vintage solid state stuff that's been on the backburner for a decade. Quite a few treasures here and there in my gear collection but unfortunately ive gotten a bit rusty on my electronics knowledge. This week's amp is a Philips...
    • aphex_nsw
    • Thread
    • din din plug help integrated amp integrated amp help philips philips 520
    • Replies: 5
    • Forum: Solid State
  24. CanadianPeng

    Repairing A Vintage Luxman L-530

    Hey all! I recently picked up a (from what I've been seeing) legendary Luxman L-530 Integrated amp locally for an absolute steal ($100cad) It is in pretty rough shape but realistically could be worse, some knobs are missing/the shafts seem to be broken right off Upon initial testing...
  25. E

    Hearing radio even with no tuner connected, Yamaha Ca810

    Just got a Yamaha CA 810 off of eBay. It's visually beautiful, nicely cleaned up by the seller. However, even with the volume all the way down, and the tuner not selected, despite there being no tuner attached anyway, I can hear the radio. It's pretty unsettling. It doesn't matter what input or...
Back
Top Bottom