• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

replacement

  1. ASRHTB

    Akai GX 600-DB Playback Components

    Hello, I am new at the forum; forgive me in case of any misunderstanding. I have Akai GX 600-DB, and working on replacing parts of * Semi-fixed / vol v8k4-1 50kB * inductor RX 22 mh * headphone trans. N16 - 535S I could not find these three components. Could you suggest to me where to find...
    • ASRHTB
    • Thread
    • akai gx-600db parts replacement
    • Replies: 0
    • Forum: Tape
  2. ikonw8

    Pushbutton switches for 1180DC

    All, Looking for a modern replacement for the the ALPS slide switches in an 1180DC (also used on the 1152 and 1300, probably others too). Marantz part numbers SP04010210 and SP04040170 (15Hz and tone defeat switches). There are not the same design as the F4UEE switches. Thank you!
    • ikonw8
    • Thread
    • amplifier marantz replacement switch
    • Replies: 2
    • Forum: Marantz Audio
  3. Usky

    Rega RP1 replacement belt in Canada?

    I bought my Rega RP1 used in 2013 and it's now running a little slow at 32.xx rpm (and the belt seems overly slack). I thought it would be easy to order an standard black belt through Amazon.ca or eBay, but I'm not finding a ton of authentic belts available. Is $33.40 CDN a fair price? Has...
    • Usky
    • Thread
    • belt rega replace replacement rp1
    • Replies: 4
    • Forum: Turntables
  4. VintageDutch

    Sony SQR 6650 Power amp problems, need advice.

    Hi guy's Some might have read about it ... if not no problem... I restored a nicotine "Rich" Sony SQR 6650 It needed maximum cleaning, Full recapping, and and and and... I was happily test driving this super sounding receiver in 4 quadro mode.. up till (after four days of problem free playing)...
    • VintageDutch
    • Thread
    • help replacement sony sony sqr-6650 sqr-6650 transistor
    • Replies: 1
    • Forum: Solid State
  5. tlann

    Kenwood KA-3500 vs. Harman Kardon 330c

    Hello! So this is probably a hard question to answer, and I know there's some subjectivity at play here. But my old Kenwood KA-3500 recently went out of commission (seems to be a blown channel), and it looks like it will be around $150 to repair, with at least month turnaround—which feels like a...
    • tlann
    • Thread
    • blown channel harman kardon harman kardon 330c kenwood kenwood ka 3500 replacement stereo amp stereo amplifier
    • Replies: 16
    • Forum: General Audio Discussion
  6. sansui au719

    Fixing up a cheap Sansui FR-D25 Turntable

    I'm trying to fix up a Sansui FR-D25 that I picked up very cheaply. It's for my teenage son. Like many teens he finds old turntables fascinating and cool but it's more to have some fun than for serious music playing. Excuse my ignorance. I'm not and never have been a vinyl guy, having bought my...
    • sansui au719
    • Thread
    • cartridge compatible fr-d25 fr-d35 headshell replacement sansui stylus turntable
    • Replies: 2
    • Forum: Turntables
  7. C

    Pioneer HPM-60 Replacement Woofers

    All, My Pioneer SX-750 amp is in the shop for recapping and LED upgrade and I've turned my attention to my Pioneer HPM-60s. Too many years ago to remember, I replaced the woofers with Pyramid brand woofers. They sound pretty bad now and I'd like to replace them to go with the refurbished...
  8. filmman697

    kenwood kd-550 tonearm replacement options

    I have a damaged tonearm with missing antiskate parts. The question is should I just replace the whole assembly or look for a tech? I am tech savvy but in a different field and the search for parts can be difficult. Otherwise it's in great shape. BK Pro 10, Crown DC-300A Series II, Emilar...
    • filmman697
    • Thread
    • kenwood kd-550 replacement tone arm repair tone arm replacement
    • Replies: 4
    • Forum: Turntables
  9. tlann

    Replacement Platter for Audio Technica AT-LP120?

    Hi all, First time posting, so please forgive me if I'm in the wrong section, but I'm curious if anyone has ever had any success tracking down a non-warranty replacement platter for their Audio Technica AT-LP120. I've had mine for 7-8 years and recently noticed that the platter is warped—I took...
    • tlann
    • Thread
    • atlp120 audiotechnica platter replacement turntable turntable adjustment turntable advice warped wow and flutter
    • Replies: 11
    • Forum: Turntables
  10. ThePlague

    Acoustic Research AR-2 Speaker - Original Components?

    Hello all, I obtained what I thought were a matching pair on the marketplace, but turns out I ended up with one AR-2 and one AR-2ax. No big deal for $20. What threw me off is the AR-2 had the grille cutouts for the AR-2a/ax. On further inspection, the grille was held in place with small headed...
    • ThePlague
    • Thread
    • acoustic ar ar-2 replacement research
    • Replies: 16
    • Forum: Speakers
  11. Sam1879

    Replacement Woofer for Infinity Kappa 8.1i

    Hi folks I'd like to start a thread about replacing Infinity Kappa 8.1i woofer driver with more modern (sub-)woofer drivers. The Kappa 8.2i (Series 2) have the same woofer driver as far as i know. The "i" relates to the versions port-design, but the driver should also be the same as fas as i...
  12. symkob

    Muffled Sound after replacing RCA Cables on Technics SL1800

    Hello, about half an hour ago I replaced my Technics SL-1800’s RCA Cables, the old ones were 44 years old and finally gave out earlier today. Everything went well while replacing the cords. I soldered everything to the correct spot. Easy stuff. Well, now every time I play a record, there’s a...
    • symkob
    • Thread
    • cord rca replacement replacing soldering technics turntable turntablism wires
    • Replies: 29
    • Forum: Turntables
  13. Paul Gentry

    Realistic STA-65B Lamp Replacements

    I'm currently working on replacing the lamps used to illuminate the FM tuning section of my Realistic STA-65B. I removed the two that were previously installed and they are a little too worn down to read their voltage and amperage. It's a bi-pin lamp, and I want to guess the voltage reads either...
  14. trickert

    Replacing Turntable Dustcovers Across Brands (Pioneer PL-112D for Sony PS-x500)

    I've acquired a few turntables over the years, and a few of them lacked or had severely damaged dustcovers. I've often been unsuccessful finding replacements, at least affordable ones. I started thinking: can dustcovers be exchangable across brands? The latest challenge was finding a dustcover...
    • trickert
    • Thread
    • brands dustcover dustcover hinges replacement turntable
    • Replies: 2
    • Forum: Turntables
  15. G

    Replacement for a Shure M97HE Stylus (on a Onkyo CP 700M)

    Hi guys, I'm very much a newbie on turntables, but got an Onkyo CP-700M handed down to me by my grandparents. However, the needle is broken and I'd like to get it back up and running. I believe the stylus is a Shure M97HE, but the options online are way too expensive for me. I'm looking for...
    • gasfe
    • Thread
    • noob onkyo onkyocp700m replacement
    • Replies: 3
    • Forum: Turntables
  16. Alonia

    Yamaha C2a 2SC1913/2SA913 replacement

    While searching for a replacement type for the transistors TR527/528 -> 2SC1913 and TR529/TR530 -> 2SA913 I found the following transistors as comparison type: 2SC1913 --> 2SC5171 (obsolet) --> 2SC4883 or 2SC4883A (digi-key) 2SA913 --> 2SA1930 (obsolet) --> 2SA1859 or 2SA1859A (digi-key) I...
    • Alonia
    • Thread
    • preamp repair replacement transistor yamaha c2a
    • Replies: 7
    • Forum: Yamaha
  17. Alonia

    Yamaha MX-1000 repair

    Hello, I'm new here ) Currently I have a broken Yamaha MX-1000 on my table. After a few hours of measuring I located the defective parts and desoldered them. I do not know if I can take these parts as replacement parts. [ The "A" version has a lower voltage. I still have some of them. I'm not...
    • Alonia
    • Thread
    • defect repair replacement replacement part yamaha mx-1000 restoration
    • Replies: 67
    • Forum: Yamaha
  18. A

    Lookjng for power supply onky receiver

    Hi there I am looking for a new power supply for my onkyo receiver. Or a replacement. Model HT-R693 that is a number for the complete set with speakers. I was already looking and the receiver model is HT-S7705 After a few minutes 10 to 20 minutes sometimes longer the power supply is making...
    • Adamo83
    • Thread
    • new onkyo powersupply replacement
    • Replies: 3
    • Forum: Solid State
  19. B

    Pioneer cs 99a Speakers (need mid-range replacement speakers)

    Just grabbed a pair at a vintage store, $300.00, they look sharp and the base sounds good, but 3 of the 4 midrange have issues and need replacing. Anyone have suggestions for replacement speakers? PS I looked through 6 pages for this or similar topic, I did not find nor can I find an advanced...
    • Bryce Sharp
    • Thread
    • cs 99a parts pioneer replacement speaker vintage
    • Replies: 16
    • Forum: Speakers
  20. M50'sMike

    Velodyne HGS 18 Repair

    Hello everyone, I have a rather specific inquiry regarding the Velodyne HGS 18. I bought the subwoofer a few months ago, but there are certain frequencies that make the sub bottom out, (even with gain at less than one) which should essentially not be happening. Because there are lower...
    • M50'sMike
    • Thread
    • repair replacement servo servo control sub woofer subwoofer subwoofer amp subwoofer repair velodyne
    • Replies: 0
    • Forum: Home Theater & Video
  21. J

    BOSE 601 Series ii crossover (only one Resistor and Capacitor in Xover )

    hello Bose enthusiasts, Anyone who rebuilt the Xover could indicate if this makes sense to them ? Perhaps the Xover were modified, i have no way to know but am strating to suspect they might have been. But maybe not, might be a leaner version of the network. Eager to hear from anyone who has...
    • Jpkwd
    • Thread
    • 601 bose capacitor crossover dayton audio rebuild replacement series 2 series ii speaker
    • Replies: 7
    • Forum: Speakers
  22. D

    Transformer replacement for AU217

    Recently, I bought a non-working AU217. The fault was a blown internal fuse in the transformer. I managed to get it out and made a bypass. Now the amp is working. Still, I‘m a bit worried, because I had to ply and cut some isolating paper etc. Is there somebody who van advise me on buiing a...
  23. mauser

    Replacements for 2SB557 and 2SD427 transistors

    Hello, I have some dead transistors in a Sherwood S-9910, and am looking for a viable new replacement, since it seems that Chinese counterfeit transistors are actually a thing. I have seen 2 different sets of transistors mentioned consistently in the forums, and am interested in the difference...
    • mauser
    • Thread
    • 2sb557 2sd427 replacement s-9910 sherwood transistors
    • Replies: 4
    • Forum: Solid State
  24. goldswimmerb

    Marantz 3800 Dolby Play Potentiometers

    Hey, so I am working on a 3800 where everything works, except the for one of the Dolby playback potentiometers, upon further inspection it appears that the carbon track inside of the potentiometer is completely broken and flaking off. Does anyone have any ideas if there is a modern replacement...
  25. D

    Replacing a blown JBL woofer

    Hope I'm posting this in the right place, thanks for any help in advance -- I've got a pair of JBL ES10 speakers I use for surround sound in my HT setup. One of them blew out its woofer. JBL doesn't offer any support or replacement parts, and it seems like a shame to toss the whole thing out...
    • Dual Minded
    • Thread
    • blown speakers es10 jbl replacement woofer
    • Replies: 3
    • Forum: Speakers
Back
Top Bottom