• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

mitsubishi

  1. S

    Help me choose: Yamaha CA-1010 vs Mitsubishi DA-U680

    Hi all, Long time lurker, first time poster! I'm trying to decide between these two amps. The Mitsubishi / Diatone da-u680 I can get for about 75USD. The Yamaha ca-1010 I can get for about 330USD. I listen to a very wide range of music, but I guess sensibilities err on the side of classical...
  2. S

    Creaky Tonearm?

    Hi, I have a Mitsubishi DP-EC1 that's been great but recently has been giving me some trouble. The mechanism is fully automatic and when I press the start button, the tonearm makes a creaky/squeaky sound while moving toward the platter and would fall short of the record. This problem went away...
  3. HiFiAaron

    Will a Phono Pre amp do? or do i need a new receiver/preamp?

    Ok so I'm not exactly new here, but its been a while since i came around. My set up is as follows Pre amp/Receiver - Yamaha RX‑V663 Power Amp - Crown Macro-tech 3600vz Speakers - Mitsubishi Ms-20s(powered by the Yamaha receiver) and Infinity Renaissance 80s(powered by the crown)...
  4. Richard Zoll

    Amateur Hour? How screwed am I?

    Greetings. Im pretty well new to tubes except for the old days and never had to really consider maint. issues etc. So don't laugh but here is what I did... I have a pretty nice Magnavox 9302 sounding excellent when using my Mitsubishi P20 Pre-Amp. Sounded pretty good. Anyway, I bought a Fisher...
  5. J

    Help with additional speakers onto stereo setup

    So, basically I am wanting to know the best way, or if I even should, hook up two extra speakers into my stereo system. So first, my setup is, PS Audio 4.6 Preamp, I have an Adcom GFA-545 amp, and as of now I have two Linn Index speakers (not sure if I or II) hooked up. The sound sounds great...
  6. ChefE

    All Mitsubishi Interplay Systems- problems and solutions?

    Hello all. A while back I acquired a Mitsubishi Interplay X-10 System including the wood cabinet with glass doors, but without speakers. It was purchased from flea bay and the seller listed it as "it works good now as it did back then". Well..... he lied. The radio works good, minus dirty pots...
  7. Honeybear

    Mitsubishi match for speakers

    I have a Mitsubishi setup (dp-ec1 turntable, da-c20 preamp, to the da-15dc amp) I was wondering what a good speaker pair up for this set up would be? Right now I am running the sony ss-u521av speakers, which have great mids, but lacking in the bass department. What are a good pair of speakers...
  8. HiFiAaron

    Mitsubishi ms-20 recap help

    Hello everyone, I am recapping my first set of speakers, a pair of Mitsubishi diatone ms-20's, and was hoping i could get a little advice. What type of capacitors should i get? Mitsubishi used Rubycon Nonpolar Axial Electrolytic Aluminum Capacitors originally that are 13mmX31mm in the 15uF...
  9. L

    Diatone / Mitsubishi DS-501 Info and Restoration

    Hey all, Thought you guys might find this interesting, as there is not a ton of info on the various Diatone models in English. Picked these up in NJ on the cheap, as I am visiting home in CT. Not sure how they ended up where they ended up, but I am glad they did. These speakers have excellent...
  10. BilboBaggins

    Looking for opinions - Ohm L vs Ohm D2

    Let me put this in context. I recently sold my Ohm D2s and the opportunity has arisen to acquire a set of Ohm L speakers. I'm hoping to get some opinions from anybody who might have owned both. Here is my inexpert opinion of the Ohm D2s I find these speakers like a high current amp to sound...
  11. J

    Mitsubishi DA-A10 handles

    Hi, I have a Mitsu DA-A10 which is my pride and joy. I got it at an antiques store in Bellingham, WA. It is heavy and it is a challenge to move. I love the look of the handles I see on some of the amps I see on the web. I have checked Ebay and found nothing. Anyone here know of a possible...
  12. BilboBaggins

    Looking for advice on a 4 speaker system in a 3000 sq ft Warehouse

    A friend of mine has asked me to help him set up his warehouse with good sound on a vintage system. He is looking for 4 speakers to fill up a 3000 sq ft warehouse. I find it an intriguing challenge as we can only do this once and have to get it right. I'm figuring on a high current power amp...
  13. kyray

    midrange replacement for Diatone DS-251 MK11??

    Just picked these up. Missing a Mid- Need a midrange that works well these. Any suggestions? These seem to be highly regarded by most-Worth restoring? Says on specs,it's a 5 cfm corn type. Anything I should look for(8 ohm & same size obviously)?? System 3 ways and 3 speaker acoustic air...
  14. camerakid

    Mitsubishi M-SS5- Goodwill Haul

    I (just today) went to a few thrift stores: Salvation Army, they had junk; then Goodwill. Now Goodwill... they have better speakers, but not much. But; what I found today (New Years day, lol), was really a good pair of speakers. They are called the Mitsubishi M-SS5's. I have barely ANY...
  15. Kahoona

    Mitsubishi DA-A10DC Need some help to bring it back to life.

    Hi This is an amp that I bought in the late 70's/ early 80's and used for 10 or 20 years. I recently got it back and want to make it work well again. It played when I got it back but the bias and offset were way out of whack. I had planned on doing a minor repair but it looks like at lease a...
  16. georgerm

    Mitsubishi DA-A15DC Transformer giving me fits...

    Hello all, I've got a pair of Mitsubishi da-a15dc power amps that have been sitting for years. Initially I was able to power both of them up, but each one displayed some type of problem. I took on the task of opening them up, inspecting and re-capping. During that process I found several issues...
  17. Kahoona

    Mitsubishi DC-A10 Service manual confusion!

    Hi I have recently gotten back a DA-C10 that helped blast me into orbit during my extended and misspent youth. I am wanting to set the Bias and DC offset and am very confused by the service manual. I have done this many times on other amps and will actually replace a couple of trimmers to make...
  18. G

    Mitsubishi Lt-30 turntable won't sense record with picture

    ok so upon removing the bottom. I noticed a blue wire that was free hanging down there and I spotted where it was removed from and soldered it. I have a feeling it may be the wrong location. Would anyone shed some light on this topic.As seen from picture the blue wire. It still has the issue of...
  19. G

    Mitsubishi Lt-30 arm doesn't drop for any record.

    Hello guys im new here. But anyways to you Mitsubishi turn table guys. I Have a question. My dad has this Mitsubishi Lt-30 he has had it since it was basically new. And currently it's issue is, it doesn't sense any record. The lights on the prism are on. And it moves from left and never drops...
  20. c.j.clarke

    Mitsu R-10/Advent 5002. Newbie trying not to mess things up

    So, with the help of all of you here, I recently purchased my first pieces of real audio equipment. I found a Mitsubishi DA-R10 receiver, a Pioneer PL-400 TT, and some Advent 5002's. I'm pretty stoked, but I want to make sure I'm doing this right. The speakers need to be re-foamed; that's...
  21. Kahoona

    Mitsubishi DA-A7DC help needed

    Hi I am hoping that some kind soul can offer some help. I have a DA-A7DC that I picked up recently. I wanted to set the bias and DC offset.I found this thread and I have set DC on many amps. http://www.audiokarma.org/forums/index.php?threads/mitsubishi-da-a7dc-bias-and-dc-questions.441384/ I...
  22. Kahoona

    I ruined some nice knobs! Anybody know how to resurrect them?

    I ruined some nice knobs! Does anyone have any experience repairing knobs? These are solid metal except for a plastic insert in some. I put them in a mix of Windex and Detergent to soak briefly and then forgot about them for a month. When I found them I scrubbed with a toothbrush. I tried some...
  23. Kabuki Speakers

    Kabuki Speakers

    My random collection of Kabuki-esque Loudspeakers and vintage Disco components. Stop! Kabuki-Time!
  24. Main system... Now with Bozaks!

    Main system... Now with Bozaks!

    A lot of re-arranging and speaker swapping since last fall. Equasounds are new, as are the Bozak B-302A and Mitsubishi gear. Lots of great sound here.
  25. My Main System

    My Main System

    This is my "semi-vintage" main system.
Back
Top Bottom