• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

turntable

  1. A

    Is my Technics tonearm 4 pins connectors damaged ?

    Hello, I’m new to the forum that i’m reading all the time to get some informations ! I’ve a question about an Technics SL-1200MK7 that i’m not using for DJing. Do removing headshell daily to clean my stylus can damage the 4 pins connector inside the tonearm ? I’m using the stock Technics...
    • Arthur92
    • Thread
    • connectors damaged headshell technics turntable
    • Replies: 2
    • Forum: Turntables
  2. DoctorJon

    Two Turntables - Using a RCA Switch?

    Hello, I am looking to hook up two turntables to one receiver and the only viable method i've researched is using a RCA splitter box and running it to my receiver. Does anyone have any experience using these boxes and if they work well (without a humming noise). I am also interested on how I am...
  3. P

    Dual 1229 is just a touch slow and I can’t quite figure it out.

    Hello. New member here. So I cleaned up a Dual 1229 that was actually gifted to me and the motor seems to be a touch slow. I removed almost, if not all, the old grease and replaced it, took the motor apart to re-oil the felt, re-glued the strobe ring under the platter as well as a lot of...
    • PJHARRIS123
    • Thread
    • dual dual 1229 dual turntable speed speed control turntable
    • Replies: 16
    • Forum: Turntables
  4. pkmcgee

    Can Anyone I.D. This Tonearm?

    I've been trying to source a 7-pin male to RCA cable for the tonearm on my recently discovered Thorens TD124 turntable. The online cable sources don't have it. Of course, they all ask who made the tonearm, but unfortunately, there is no identifying mark on it. And, though I'm a bit of a...
    • pkmcgee
    • Thread
    • cable connector thorens tonearm turntable
    • Replies: 17
    • Forum: Turntables
  5. G

    Kenwood KD-2055 turntable -- a good deal?

    Hey! So there's a Kenwood KD-2055 turntable for sale in my area. The seller wants $200. This is the info they provide: Cover is scratched but the turntable plays well . new belt, lubed, cartridge and needle in good condition. I asked what the cartridge is and he said an Audio technica AT...
  6. G

    Technics SL-1500 (MK1)

    I've seen a listing (near where I live) for an updated Technics SL-1500 (MK1). The guy wants $450. I'm wanting to know, is this a good deal? Anyone have any advice here? Thanks! Here's all the info he provided (I'll include a picture too): Technics SL-1500 (MK1) "National Panasonic" model in...
  7. S

    Magnavox 90 ultra tracking turntable help with tonearm weight adjustment

    Which way to turn thumb screw in back of tonearm on my magnavox 90 ultra track turntable. I want to lessen tracking force Can anyone help me?
    • Spector3417
    • Thread
    • magnavox micromatic turntable weight adjustment
    • Replies: 2
    • Forum: Turntables
  8. S

    Denon DP-23F vs DP-7F

    Hello! I have been playing a Denon DP-23F but just picked up a DP-7F. I think I like the 23F better but does anyone have any input on the +/- of each of them? I know they are both CBP but...
  9. Senor Visa

    Help with Sony PS-LX3

    Hello, I own two of these, and bought a second one "for parts", which turned-out to be more functional than the first, which had deteriorated [these are from the late 70's/early 80's] to no longer having any of the automated functions work. The older one worked perfectly, just didn't...
    • Senor Visa
    • Thread
    • cueing cueing arm electronics sony turntable vinyl
    • Replies: 0
    • Forum: Turntables
  10. I

    Slanted tonearm Pioneer PL-41

    I just got a new (to me) PL-41 turntable, and noticed something weird about the tonearm: Now it looks to me like the guy just didn’t screw in the screws for the pivot point. I leveled it out and screwed them in, as shown below: And now I’m wondering if the table is okay to use, or if I...
    • IdiotWind
    • Thread
    • pioneer tonearm tonearm adjustment tonearm alignment tonearm balance turntable turntable adjustment
    • Replies: 3
    • Forum: Turntables
  11. C

    Right speaker channel, only tweeter working? Help!

    Hi all, This is my first post on the forum as I've recently got into vinyl after my other hand and I acquired a HiFi system from her late grandma. We're having an issue where only the tweeter is working on the right hand speaker when it's on turntable input. I've swapped the speakers over and...
  12. I

    The AR (Acoustic Research) Turntable for Sale - Reasonable Price?

    One of these just popped up in my area on Craigslist (it is an "The AR" model not the ES1). It's cosmetically in good condition but according to the owner has never been officially serviced. Motor spins up without issues, there's some slight movement in the arm but no major red flags according...
  13. T

    Cartridge suddenly sounds muffled ?

    I was playing aeound a bit with a turnable and trying to figure out what cartridge I should mount on it. When I got to one of my 412 mk3s I figured that it sounded great so I left it on the tt. However after 40 minutes of listening it suddenly started sounding muffled, kinda similar to how a...
    • TrevorBarten
    • Thread
    • 412 cartride damaged not working phillips repair turntable
    • Replies: 18
    • Forum: Turntables
  14. CharlieG

    Decent "Birthday" Score

    Hello all! I haven't posted in a bit, but I scored some new stuff for a pretty decent price today and wanted to share it with you all! Here's what I got today: Technics SA-5270 1977 Stereo Receiver; 35 WPC into 8Ω The unit was received in near mint condition, with no manual present. Very low...
  15. lopezluna

    Thorens td-126mkii with tp-16mkii tonearm wich protactor to use

    Hi everyone, I recently aquired a Thorens td-126 mkii with the tp-16mkii tonearm and would like to know wich cartridge alignment protractor to use with this turntable/tonearm. I have read and read numerous posts regarding this but some say bardwell others Stevenson. Any help will be greatly...
    • lopezluna
    • Thread
    • alignment protractor thorens td-126mkii tp16mkii tonearm turntable
    • Replies: 1
    • Forum: Turntables
  16. Z

    dj turntable tracking force

    So i'm interested in mixing with vinyl and wanted to know what the recommended tracking force would be for scratching.
    • zmoss48
    • Thread
    • djing mixing tracking force turntable vinyl
    • Replies: 2
    • Forum: Music Forums
  17. ZeroFks

    Looking for: Vintage Turntable Repair New Jersey

    Hey guys! Hoping someone might be able to point me in the direction of an experienced tech in the vicinity of Randolph or Newark NJ. Thanks for your help! Cheers, Jeremy
  18. O

    replacing PL-516 tonearm with one from PL-518

    Hello everyone. Has anyone ever attempted (or has any idea if it is possible) to replace the PL-516 tonearm with one from a PL-518? From the service manuals it seems the mount is similar. Thanks!
  19. C

    No sound after replacing rca on Pioneer pl-12d

    Hey everybody, I need your wisdom for my situation here. Let me know if this is the right place to post this. So after trying to replace some new rca cables because the ones it had were bad, there is no sound from both channels. I did continuity test on the cables from tip of rca to the...
    • CptTomato
    • Thread
    • pioneer pioneer pl-12d tonearm turntable
    • Replies: 3
    • Forum: Turntables
  20. G

    Stereo/Mono Issue : Dual CS-5000

    I have 3 Dual CS-5000's. 1 works great, 1 is a donor, and the 3rd has been problematic for months, but I'd like it to be a daily spinner. Here is the current issue: The left channel does not play when receiver stereo/mono switch set to stereo, but both speakers play when set to mono. Other...
    • gemooky
    • Thread
    • cs-5000 cs5000 dual issues turntable
    • Replies: 7
    • Forum: Turntables
  21. BossrossJ

    Need help with a GE Gerrard turntable/coffee table

    I just bought a coffee table/turntable from a friend that wasn’t using it. I don’t know the exact name it’s it’s all new to me but I know I need a new power cord for it I’m just not sure what kind or how to attach it once I get it.
    • BossrossJ
    • Thread
    • coffee table ge gerrard turntable wires
    • Replies: 7
    • Forum: Turntables
  22. T

    Sony ps-x4 return issue

    Hi all. I have a little issue with this ps x4 that O bought from my local record shop. You see the turntable works fine but the auto return and return in general is not working correctly. The arm lifts up but it doesn't go back the position zero. It does move a bit but only when at the ending of...
  23. Kalliman

    Yamaha A-420 with Paradigm 3se's.

    Hello, Completely new to this world so be gentle. Had an original pair of Paradigm 3se's sitting around and found what I hope will be a fully functional Yamaha A-460. Will be adding a Yamaha Dvd-s550 as one source, and a BT unit for my digital music. For the Paradigm 3se's, given the...
    • Kalliman
    • Thread
    • 3se a-460 a500 bob marley dual cs-515 monitor 7v2 paradigm turntable yamaha yamaha a-460
    • Replies: 6
    • Forum: Solid State
  24. Worthy_Wax

    Thorens TD166 MII local ad (pics)

    I answered a local add today where a guy was cleaning out his house and was selling his old Thorens TD166 MII turntable. He was asking $300.00 CAD for it but he said he would go as low as $200.00. I said SOLD! I have it all hooked up and it sounds amazing. The man I bought it from was the...
  25. sansui au719

    Fixing up a cheap Sansui FR-D25 Turntable

    I'm trying to fix up a Sansui FR-D25 that I picked up very cheaply. It's for my teenage son. Like many teens he finds old turntables fascinating and cool but it's more to have some fun than for serious music playing. Excuse my ignorance. I'm not and never have been a vinyl guy, having bought my...
    • sansui au719
    • Thread
    • cartridge compatible fr-d25 fr-d35 headshell replacement sansui stylus turntable
    • Replies: 2
    • Forum: Turntables
Back
Top Bottom